Download Table.of. Contents

MAV500™ C3 and Xtreme®
Service Manual
Ticket Printers
Specifications
Custom Tickets
Feature
Specification
Print Speed
51mm/sec
Print Resolution
8 dots per mm horizontal and vertical
Printing Method
Direct Thermal
Print head life
25km
Data Buffer
4kb
Power Requirement
24V DC ±10% 1.5A max.
Ticket Dimensions
65mm x 156mm
Ticket Stack
58mm
Interface
RS-232 bi-directional XON/XOFF
Communications Protocol
9600 baud, 8 data bits, no parity, 1 start
bit, 1 stop bit
Bezel Dimensions
139mm x 85mm
Printer Depth
325mm
Weight
3.41kg
The Ithaca Printer uses the thermal printing method. To use custom pre-printed
tickets, all graphics must be compatible with thermal ink. The underside of the ticket
contains indexing marks that must be clear of any graphics and disclaimer notices.
The marks must be printed in black, thermal-paper-compatible, be in infrared
ink, and printed with a McBeth Densitometer reading of 1.5 to 0.3. The indicator
must be 3mm by 8mm and located at a distance of 3.5mm from the right side
and 6mm from the top of the ticket back. The 11.5mm area in line with the
black-dot / top-of-form indicator and the ticket edge must remain clear, as the
ticket-out sensor reads that area while the ticket is printed and presented.
6.00 mm
11.50 mm
3.00 mm
3.50 mm
Top of Form
Indicator
Usable
Area
Custom Tickets
This document contains confidential
information that is proprietary to ATI.
It may not be copied or disclosed to
unauthorized parties. © 2006
Aristocrat Technologies, Inc.
All rights reserved.
363
28-01186-01
10 Nov 2006
Keep Out
Zone