Download SEARCH:SEARCH

Commands Listed in Alphabetical Order
Examples
SET? might return the following response: :ACQUIRE:STOPAFTER
RUNSTOP;STATE 1;MODE SAMPLE;NUMENV 10;NUMAVG 16;REPET
1;:FASTACQ:STATE 0;:APPLICATION:GPKNOB1:ACTIVE
0;:APPLICATION:GPKNOB2:ACTIVE 0;:APPLICATION:WINDOW:HEIGHT
236;WIDTH 640;:APPLICATION:SCOPEAPP:STATE
RUNNING;WINDOW FULLSCREEN;:APPLICATION:EXTAPP:STATE
NOTRUNNING;:AUXOUT:SOURCE ATRIGGER;EDGE
FALLING;:CMDBATCH 1;:HEADER 1;:LOCK NONE;:ROSC:SOURCE
INTERNAL;:VERBOSE 1;:ALIAS:STATE 0;:DISPLAY:CLOCK
1;COLOR:PALETTE NORMAL;MATHCOLOR DEFAULT;REFCOLOR
DEFAULT;:DISPLAY:FILTER SINX;FORMAT YT;GRATICULE
FULL;INTENSITY:WAVEFORM 75.0000;AUTOBRIGHT 1;SCREENSAVER
1;SCREENSAVERDELAY 28800;:DISPLAY:PERSISTENCE
OFF;STYLE VECTORS;TRIGBAR SHORT;TRIGT 1;VARPERSIST
500.0000E-3;:HARDCOPY:FILENAME "untitled";PORT
FILE;:DIAG:LEVEL SUBSYS;:SAVE:WAVEFORM:FILEFORMAT
INTERNAL;:TRIGGER:A:MODE AUTO;TYPE
EDGE;LEVEL 0.0000;HOLDOFF:BY DEFAULT;TIME
1.5000E-6;:TRIGGER:A:EDGE:SOURCE CH1;COUPLING DC;SLOPE RISE;
*SRE
The *SRE (Service Request Enable) command sets and queries the bits in the
Service Request Enable Register. For more information, refer to Registers.
Group
Status and Error
Syntax
*SRE <NR1>
*SRE?
Related Commands
Arguments
Examples
*CLS, DESE, *ESE, *ESR?, EVENT?, EVMsg?, FACtory, *STB?
<NR1> is a value in the range from 0 through 255. The binary bits of the SRER
are set according to this value. Using an out-of-range value causes an execution
error. The power-on default for SRER is 0 if *PSC is 1. If *PSC is 0, the SRER
maintains the previous power cycle value through the current power cycle.
*SRE 48 sets the bits in the SRER to binary 00110000.
*SRE might return 32, showing that the bits in the SRER have the binary value
of 00100000.
First Draft — October 18, 2005 — Kirk Wimmer
DPO4000 Series Programmer Manual
2-251