Download Mentor Plus User Guide - Trilogy Communications
Transcript
350 “Mentor Plus” User Guide 2.17.6 Pulse Board Output impedance Pulse Levels (Not PAL Ident) 75Ω 2V ± 0.2V (PAL) 4V ± 0.2V (NTSC) Pulse levels, PAL Ident 1V ± 0.1V Pulse black level 0V ± 0.1V Pulse rise fall times, 10 % to 90 % 150nS ± 10nS Subcarrier amplitude 1V ± 0.1V (PAL) 2V ± 0.2V (NTSC) Subcarrier D.C. level 0V ± 0.1V Subcarrier phase (relative to main black 0° ± 5° burst output) 2.17.6.1 PAL Pulse timings Burst Gate timing Mixed Blanking Line Drive PAL Ident Field 1 marker Field Drive Starts 5.5µS after sync falling edge, duration of 2.3µS Starts 1.5µS before sync falling edge, duration of 11.9µS Early - Starts 1.5µS before sync falling edge, duration of 6.5µS Normal - Starts coincident with sync falling edge, duration of 6.5µS Transition is coincident with sync falling edge Starts 10.4µS after sync falling edge, duration of 52µS (active picture width). Occurs on line seven only The start is coincident with the last mixed blanking edge prior to the field interval, duration 7½ lines 2.17.6.2 NTSC Pulse timings Burst Gate timing Mixed Blanking Line Drive Field 1 marker Field Drive Trilogy Broadcast Limited Starts 5.3µS after sync falling edge, duration of 2.5µS Starts 1.5µS before sync falling edge, duration of 10.7µS Early - Starts 1.5µS before sync falling edge, duration of 6.5µS Normal - Starts coincident with sync falling edge, duration of 6.5µS Starts 9.2µS after sync falling edge, duration of 53µS (active picture width). Occurs on line seven only The start is coincident with the last mixed blanking edge prior to the field interval, duration 9 lines Issue 7 Page 17 of 64