Download Mentor Plus User Guide - Trilogy Communications

Transcript
350 “Mentor Plus” User Guide
2.17.6 Pulse Board
Output impedance
Pulse Levels (Not PAL Ident)
75Ω
2V ± 0.2V (PAL)
4V ± 0.2V (NTSC)
Pulse levels, PAL Ident
1V ± 0.1V
Pulse black level
0V ± 0.1V
Pulse rise fall times, 10 % to 90 %
150nS ± 10nS
Subcarrier amplitude
1V ± 0.1V (PAL)
2V ± 0.2V (NTSC)
Subcarrier D.C. level
0V ± 0.1V
Subcarrier phase (relative to main black 0° ± 5°
burst output)
2.17.6.1 PAL Pulse timings
Burst Gate timing
Mixed Blanking
Line Drive
PAL Ident
Field 1 marker
Field Drive
Starts 5.5µS after sync falling edge, duration of 2.3µS
Starts 1.5µS before sync falling edge, duration of 11.9µS
Early - Starts 1.5µS before sync falling edge, duration of 6.5µS
Normal - Starts coincident with sync falling edge, duration of
6.5µS
Transition is coincident with sync falling edge
Starts 10.4µS after sync falling edge, duration of 52µS (active
picture width).
Occurs on line seven only
The start is coincident with the last mixed blanking edge prior to
the field interval, duration 7½ lines
2.17.6.2 NTSC Pulse timings
Burst Gate timing
Mixed Blanking
Line Drive
Field 1 marker
Field Drive
Trilogy Broadcast Limited
Starts 5.3µS after sync falling edge, duration of 2.5µS
Starts 1.5µS before sync falling edge, duration of 10.7µS
Early - Starts 1.5µS before sync falling edge, duration of 6.5µS
Normal - Starts coincident with sync falling edge, duration of
6.5µS
Starts 9.2µS after sync falling edge, duration of 53µS (active
picture width).
Occurs on line seven only
The start is coincident with the last mixed blanking edge prior to
the field interval, duration 9 lines
Issue 7
Page 17 of 64