Download BM 100 A Reflex

1.6.0
1.6.1
SERIAL I/O
(Serial Input/Output)
BAUDRATE*
1.6.2
ADDRESS
Select 1200, 2400, 4800,
9600 or 19600 baud
1200 bd
Enter a number from 0 to
255**
000
For integrating into a digital
network
Defines transmission rate of
information between BM100 and
remote terminal. HART/SMART
outputs are fixed at 1200 baud
Address of a device in a digital
network. If HART protocol is used,
entering >0 will configure the gauge
for multi-drop networks & output
current 1 to 4 mA.
*RS485 interface only
**0 to 15 if HART.
1.7.0
1.7.1
STRAP. TAB
(Strapping Table)
VOL. UNIT
(Volume / Mass Unit)
1.7.2
INPUT.TAB.
(Strapping Table Input)
1.7.3
DELETE TAB.
(Strap Table Delete)
38
Select m³, litre, US gal.,
GB, gal., Ft.³, bbl, kg,
metric ton, ton GB or ton
US.
m³
Select point 01 to 50,
enter level and then
volume values
respectively.
00
Select SURE YES or
SURE NO.
SURE NO
Handbook BM 100 A
For calibrating the gauge for
volume measurement.
Selects the volume or mass unit for a
volume strap table.
Table or calibrating the gauge point
by point in terms of product level and
volume values.
Clears the data from the existing
strapping table.