Download SERVICE MANUAL - e-ASP

Transcript
RS232 Cable
Adapter
P1
6-3 Setup Procedure
JP1
1. Connect all ports
P3
P4
- Power adapter to fixture JP1
- Fixture P1 to PC COM1 Port
DVI Cable
VGA Cable
- Fixture P4 to Projector analog port
- Fixture P3 to Projector digital port
- Power on fixture
VGA
HDMI
Note: JP3 is closed in all procedure.
6-4 EDID Key-In Procedure
1. Click on "EDID" to execute EDID program
2. Choose model
- In the port selection bar, please choose
the port that you use. Example: if you
use "COM1", choose COM1 in the port
selection.
- Click on "Model".
- Choose the EDID that responses to the
model that you choose.
EX330/EW330/EX330(1W)/EW330(1W)
Confidential
6-