Download MAINTENANCE INTERVALS - Safety

Transcript
90
Maintenance Section
Battery - Recycle
i00637582
Battery - Recycle
i01033528
Bucket Lower Pivot Pin Lubricate
SMCS Code: 1401-561
Always recycle a battery. Never discard a battery.
SMCS Code: 6108-086-PN
Always return used batteries to one of the following
locations:
• A battery supplier
• An authorized battery collection facility
• Recycling facility
i00637583
Battery, Battery Cable or
Battery Disconnect Switch Replace
SMCS Code: 1401-510; 1402-510; 1411-510
1. Turn the engine start switch key to the OFF
position. Turn all of the switches to the OFF
position.
2. Turn the battery disconnect switch to the OFF
position. Remove the key.
3. Disconnect the battery cable at the battery
disconnect switch. The battery disconnect switch
is connected to the machine frame.
Illustration 204
g00289467
Lubricate two fittings. There is one fitting on each
side of the bucket.
i01027107
Bucket Teeth and Cutting
Edges - Inspect/Replace
SMCS Code: 6801-040; 6801-510; 6822-040;
6822-510
4. Disconnect the negative battery cable at the
battery.
Personal injury or death can result from bucket
falling.
5. Make necessary repairs or replace the battery.
Block the bucket before changing bucket tips.
6. Connect the negative battery cable at the battery.
7. Connect the battery cable at the battery
disconnect switch.
8. Install the key and turn the battery disconnect
switch to the ON position.
1. Raise the bucket and block up the bucket. Only
block up the bucket to a sufficient height for
removing the bucket tips.
2. Shut off the engine.