Download T-D2-IN&OS_Service M..
Transcript
CONFIDENTIAL T-D2-IN / T-D2-OS Service Manual Ver. 1.00 10-11. Thermistors #407 (Inlet) Unit Part # #408 (Mixing) EKK38 (Inlet) Takagi Part # #411 (Output) EKK1A (Mixing) E1 (Mixing) Checkpoint EKK2T (Output) E2 (Output) E3 (Inlet) Function Measures cold/hot water temperatures in the water heater. Failure events Unable to properly measure water temperatures within the water heater. Effects on the water If the thermistors fail open or short, error code appears before starting operation. heater if thermistor If resistance values are just off, The water heater will have temperature fluctuations fails in hot water. Error codes when 311 (Output) 321 (Inlet) 331 (Mixing) thermistors fails 1. Visual inspection: connection/breakage of wires and/or debris on thermistor. Diagnostic 2. Check voltages and resistance; proper range of values shown below. 68˚F (20°C) 9.0 to 13 kΩ Inlet Black(42)-Black Color/Number of wires 122˚F (50°C) 3.3 to 4.4 kΩ Output Black(12)-Black 176˚F (80°C) 1.4 to 1.8 kΩ Mixing Black(113)-Black (see table below for more resistance values) Black (Inlet thermistor) 42 Blue (Mixing thermistor) 113 Black Insulating (Output thermistor) 12 Resistance values of thermistors as a function of temperature 25.00 Resisitance / kΩ 20.00 15.00 10.00 5.00 0.00 20 40 60 80 100 120 140 Temperature / ºF 27 160 180 200 220