Download Installation Manual

2 Pre installation
2.2 Tools and hardware
NOTE! All screws, bolts, nuts and washers used in FOCUS
are in metric sizes.
The following tools are required during the installation:
„
„
„
„
„
„
„
„
„
„
„
„
„
Metric Allen wrench set
Electric drill, drill bits (8 mm & 10 mm or equal)
Mounting hardware for wall bracket
Pencil or drawing ink
Spirit Level
Hammer
Anchor driver (concrete wall)
Flat screw drivers
Pozidrive or phillips screwdrivers (PZD-1 and PZD-2)
Pliers
Knife or scissors
Wrenches, 13 mm and 19 mm
Tape measure
Make sure that you have all tools and items needed prior to
installation.
NOTE! This unit is intended for fixed installation only,
therefore mobile installation is prohibited.
4
Instrumentarium Dental
51775-IMG rev 7