Download Maintenance/Service Manual

Maintenance and Service Manual
Wheelchair-Accessible
Lowered Floor Conversion
(Foldout Ramp) featuring
2006 & 2007*
Chrysler Minivans
*(including some late 2005 conversions)
®
WARNING
Man
u
al
34852
September 2008
Braun Lowered Floor Conversions
2006 & 2007 Chrysler Minivans
Read manual
before servicing.
Failure to do so
may result in
serious bodily
injury and/or
property damage.
INTRODUCTION
Introduction
Braun lowered floor conversions are designed
to provide years of pleasure and mobility independence. Familiarity with proper operation and
maintenance procedures will help ensure safe,
troublefree operation.
Safety precautions, maintenance and troubleshooting details are provided. Wiring Diagrams
and Electrical Schematics are provided to aid
in troubleshooting. A Repair Parts section with
exploded views and corresponding parts lists are
also provided.
Refer to the information applicable for the conversion you are servicing and disregard the information that does not apply.
Warranty and Return Authorization
ranty claims (parts,
repairs, etc.), all
requests must be
processed through
the Braun Corporation Product Support Department.
Product Support will
issue a Return Material Authorization
(RMA) number and
detail the procedures
required for processing returns and/or
authorizing credit.
WARNING
Maintenance, lubrication, troubleshooting and service
procedures must be
performed as specified by an authorized
service technician.
Failure to do so may
result in serious
bodily injury and/or
property damage.
The last eight digits of the vehicle identification
number (VIN) must be provided when filing a
warranty claim or ordering parts.
Refer to the Limited Warranty Booklet for detailed
terms and provisions. When processing any war-
Operation Quick Reference Guide
Conversion Operation Overview
Control switches display the slide
door graphic.
This overview provides a simplified explanation
of conversion operation. Read the entire owner’s
(operator’s) manual for complete details. Contact
The Braun Corporation if any of this information is
not understood.
Power Operation
Conversion power functions are managed by the
One-Touch electronic control system. The control system can be activated using the Chrysler
remote keyless
Chrysler
entry transmitter,
Remote
any one of the
Keyless
interior-mounted
Entry
control switches
Transmitter
or the optional
magnetic entry.
Press and
release this
switch two
(2) times.
One-Touch Control Activation
Conversion power door, ramp and kneel functions
are activated by pressing and releasing any control switch (press and release remote entry transmitter button twice).
Open Functions: When activating the Open functions, the power door opens, the ramp deploys and
the kneel system lowers the rear of the vehicle.
Close Functions: When activating the Close
functions, the ramp stows first, and then the kneel
system and the power door are activated simultaneously.
Manual Operation
The passenger power sliding door and ramp can
be manually operated. Read the owners manual
for further details.
CONTENTS
Safety Precautions ............................................ 2
Electrical Schematic - 2006 & 2007*
Chrysler Conversion (Foldout Ramp)
Towing ................................................................ 2
Power Door, Foldout Ramp & Kneel System
(with Curtain Air bags) .......................19B, 20B
Maintenance and Service Requirements ......... 3
Electrical Schematic - 2006 & 2007*
Maintenance and Lubrication Schedule ....... 4-6
Chrysler Conversion (Foldout Ramp)
Power Door, Foldout Ramp & Kneel System
Troubleshooting Diagnosis Chart ............... 7-10
(without Curtain Air bags) ................. 21A, 22A
Microswitches .................................................. 11
Electrical Schematic - 2006 & 2007* Chrysler
Conversion (Foldout Ramp) Front Passenger
Below Floor Obstructions ............................... 12
Seat Electrical Systems (Memory) ... 21B, 22B
Auxiliary Power Supply ................................... 13
Electrical Schematic - 2006 & 2007*
Chrysler Conversion (Foldout Ramp) Front
Switch and Component Location ........ 15A, 16A
Passenger Seat Electrical Systems
(Non-Memory) .................................. 23A, 24A
Wiring Diagrams and Electrical Schematics
Repair Parts
Wiring Diagram - 2006 & 2007* Chrysler
Conversion (Foldout Ramp) Power Door,
Exploded View - 2006 & 2007* Chrysler
Foldout Ramp & Kneel System (with Curtain
Conversion (Foldout Ramp) Platform
Air bags) ........................................... 15B, 16B
Assembly .................................... 23B, 24B, 25
Wiring Diagram - 2006 & 2007* Chrysler
Exploded View - 2006 & 2007* Chrysler
Conversion (Foldout Ramp) Power Door,
Conversion (Foldout Ramp) Ramp
Foldout Ramp & Kneel System (without
Assembly Gear, Motor and Base
Curtain Air bags) ............................... 17A, 18A
Assembly .................................... 26, 27A, 28A
Wiring Diagram - 2006 & 2007* Chrysler
Exploded View - 2006 & 2007* Chrysler
Conversion (Foldout Ramp) Front Passenger
Conversion (Foldout Ramp) Ramp
Seat Electrical Systems (Memory) ... 17B, 18B
Assembly .................................... 27B, 28B, 29
Wiring Diagram - 2006 & 2007* Chrysler
Exploded View - 2006 & 2007* Chrysler
Conversion (Foldout Ramp) Front
Conversion (Foldout Ramp) Kneel
Passenger Seat Electrical Systems
Assembly .............................................. 30, 31
(Non-Memory) .................................. 19A, 20A
Dimensions ...................................................... 32
* Includes some late 2005 conversions.
Page 1
SAFETY PRECAUTIONS
Safety Precautions
WARNING
Read this manual,
the conversion's operator’s manual and
supplements before
performing operation, maintenance or
service procedures.
Failure to do so may
result in serious
bodily injury and/or
property damage.
WARNING
Maintenance and service procedures must be performed
only by authorized service personnel.
WARNING
Perform maintenance and lubrication procedures exactly
as outlined in the Maintenance and Lubrication Schedule
contained in this manual.
WARNING
Perform troubleshooting and service procedures as outlined
in this manual and/or service bulletins supplied with replacement parts.
WARNING
Replacement parts must be Braun authorized replacements.
WARNING
Do not attempt to interface aftermarket control systems
without authorization from The Braun Corporation.
WARNING
Do not use accessory devices not authorized by The Braun Corporation.
WARNING
Keep clear of area in which the vehicle kneels (lowers).
WARNING
Keep clear of area in which ramp operates.
WARNING
Never modify (alter) a Braun Corporation lowered floor minivan conversion.
WARNING
Do not install a raised top on a Braun Corporation lowered floor minivan conversion.
WARNING
Use of a Braun Corporation lowered floor minivan conversion for towing is prohibited.
WARNING
Failure to follow these safety precautions may result in serious bodily injury and/or
property damage.
Towing
Towing with a Lowered Floor Conversion
Use of a lowered floor conversion vehicle for
towing is prohibited.
Transporting a Lowered Floor Conversion
If case of service, The Braun Corporation recommends that lowered floor conversion vehicles be
transported on a trailer rather than towed with
one set of wheels suspended and the other set
of wheels remaining in road contact.
Page 2
Trailer Transport
MAINTENANCE and SERVICE
Maintenance and Service Requirements
Braun lowered floor minivan
conversions must be maintained
and serviced by a Braun authorized service representative who
has attended and been certified
by The Braun Corporation Sales
and Service School for Braun
Mobility Products.
Read and become familiar with
the operating procedures outlined in the applicable operator’s
manual and the maintenance
and troubleshooting information
contained in this manual before
beginning operation, maintenance or service procedures.
Contact The Braun Corporation
if any of this information is not
understood.
One-Touch Electronic Control
System: The electronic control
system provides simple onetouch activation of power functions. For your convenience, the
control system can be activated
using the OEM remote keyless
entry transmitter or one of the
interior switches identified in the
operator's manual.
Braun Corporation
Aftermarket Control
Systems Policy:
The Braun Corporation manufactures dedicated control systems
for its products. These control
systems have been designed
and tested for use in conjunction
with specific Braun products.
Braun control systems are the
only control systems authorized
for use with Braun products.
Do not attempt to interface aftermarket control systems without
authorization from The Braun
Corporation. To do so may
result in serious bodily injury
and/or property damage.
Page 3
MAINTENANCE and SERVICE
Preventive Maintenance
Maintenance is necessary to ensure safe and trouble free conversion operation. Encourage the
consumer to perform preventive
maintenance procedures. General preventive maintenance consisting of inspections along with
cleaning procedures should be
a part of the consumers routine.
Keeping the passenger slide door
lower track pan free of debris, ice
and snow is one of the most effective preventive maintenance
practices to exercise. Regular
preventive maintenance procedures will increase the service
life of the conversion, as well as
enhancing safety.
The consumer should inspect and
clean frequently and routinely
(minimum four weeks or 100
cycle intervals).
Note: A Preventive Maintenance
section is provided in the operator's manual.
Maintenance and Lubrication Schedule
Normal vehicle maintenance
must be performed as outlined
in the OEM-supplied owner’s
manual. This maintenance is not
the responsibility of The Braun
Corporation.
The maintenance and lubrication procedures outlined in this
schedule must be performed at
the recommended scheduled
intervals by a Braun authorized
service representative.
Clean specified components and
the surrounding area before applying lubricants. When replacing lubricated components, be
sure to lubricate during installation procedures.
A “dri-film” style of light oil should
be applied where *Light Oil is
called out (goes on wet and then
dries). Lubricants of this type
are available that do not attract
dust and other debris. Use of
improper lubricants can attract
Page 4
dirt or other contaminants which
could result in wear or damage
to components. Avoid lubricants
that can leave stains.
Some lubricants referenced in the
schedule are available from The
Braun Corporation (part numbers
provided where specified).
All listed inspection, lubrication
and maintenance procedures
should be repeated at “3 month”
intervals following the scheduled
“6 month” maintenance. These
intervals are a general guideline
and will vary according to frequency of use and conditions.
Exposure to severe conditions
(weather, environment, contamination, heavy usage, etc.) may require inspection and maintenance
procedures to be performed more
often than specified.
Discontinue use immediately
if maintenance and lubrication
procedures are not properly per-
formed, or if there is any sign of
wear, damage, improper operation or any abnormal condition.
Contact your sales representative or call The Braun Corporation. One of our national Product
Support representatives will direct you to an authorized service
technician who will inspect your
conversion.
WARNING
Maintenance and lubrication procedures
must be performed
as specified by an
authorized service
technician. Failure
to do so may result
in serious bodily injury and/or property
damage.
MAINTENANCE and SERVICE
Maintenance and Lubrication Schedule
Foldout Ramp: Foldout ramps vary in
design. Disregard references to components
not present.
3 Months
Outboard ramp extension hinge and fasteners
Clean and lubricate with *Light Oil. Resecure
or replace fasteners as needed
Inspect ramp inboard pivot points (bolts/screws
and bushings/bearings) for positive securement,
wear or damage
Clean and lubricate with *Light Oil. Tighten,
replace or correct as needed
Inspect ramp fold pickup bearing for positive
securement, alignment, wear or other damage
Replace or correct as needed. If bearing
retaining screw is not secure or is removed for
service, apply Blue #242 Thread Locker Loctite
to retaining screw and tighten.
Inspect ramp fold arm for positive securement,
alignment, wear or other damage
Tighten, replace or correct as needed
Inspect ramp fold arm bearing slot for excessive
wear or damage
Replace if needed
Inspect ramp extension chain for proper alignment, securement or other defects
Realign, resecure, replace or otherwise correct
as needed
Inspect ramp floor mounting hardware for securement (loose or missing)
Resecure, replace or correct as needed
General Items
Lower power slide door track
Inspect for obstructions and clean (vacuum or
blow out debris using compressor)
Wheelchair and occupant restraint belts and tie
down track
Inspect for any defects such as cuts, fraying or
any malfunction of belt, buckle or securement
hardware. Clean dirt and debris from tie down
track. Replace immediately if damaged.
Inspect removable seat bases for proper engagement of latching mechanisms
Replace or correct as needed
Page 5
MAINTENANCE and SERVICE
Maintenance and Lubrication Schedule
Perform all procedures listed in previous section also
Power Fold Ramps:
• Ramp flap (extension) chain
Remove ramp housing cover/rear vertical panel
and inspect:
• Top mount bracket bolts for securement
(loose or missing)
• Motor mounting bolts for securement (loose
or missing)
• Ramp fold arm securement (collar and
mounting screws)
• Microswitches securement and adjustment
• Microswitch wires and terminals for securement or damage
• Magnetic switch (optional)
6 Months
Inspect power source: Vehicle battery, 50
ampere fuse, vehicle engine compartment fuse
block and driver side under dash-mounted fuse
block.
Inspect kneel actuator assembly for:
• Actuator mounting pin securement
• Inspect chain for misalignment, wear or
damage
• Inspect chain master-links for securement
• Inspect chain idler (pulley) for securement,
wear, damage or misalignment
• Inspect electrical harnesses for positive
connections, proper routing, wear or other
damage
• Kneel microswitch(es) securement, wear or
other damage
Kneel assembly chain
Consecutive
3 Month
Intervals
Page 6
Repeat all previously listed inspection, lubrication and maintenance procedures at 3 month
intervals.
Lubricate with Anti-Seize (14 oz. caulk tube
available per Braun part no. 24710)
Resecure, adjust microswitches, replace damaged parts or otherwise correct as needed.
Note: See Ramp Microswitch Adjustment on
page 11.
Resecure, repair or replace
Realign, resecure, replace damaged parts or
otherwise correct as needed. Note: See Kneel
Actuator Assembly exploded view on page 31.
Lubricate with Anti-Seize (14 oz. caulk tube
available per Braun part no. 24710)
TROUBLESHOOTING
Troubleshooting Diagnosis Chart
WARNING
Troubleshooting and
repair procedures
must be performed
as specified by an
authorized service
technician only. Failure to do so may result in serious bodily
injury and/or property
damage.
FUNCTION
Operation should be discontinued immediately if a conversion problem occurs. Repairs
should not be attempted by the
consumer. Contact the sales
representative or call The Braun
Corporation. One of our national
Product Support representatives
will direct you to an authorized
service technician who will inspect your vehicle.
The cause of the problem can
be determined by locating the
function and related symptom in
the Troubleshooting Diagnosis
SYMPTOM
1.10
No Power to
Conversion
Systems
(Circuit Problem)
1.00
NO
OPERATION
1.20
Power to
Conversion
Systems
But No
Operation
POSSIBLE CAUSE
Charts. The specific cause and
remedy can then be determined
by process of elimination. Electrical Schematics and Wiring
Diagrams are provided to aid in
troubleshooting.
A Repair Parts section with exploded views and corresponding
parts lists is also provided. Correct the problem if possible. If
the problem continues, contact
The Braun Corporation.
REMEDY
1.11
1.12
1.13
1.14
1.15
Poor ground connection
Battery terminals dirty
Battery damaged
Battery discharged
12 volt source (check fuses for
12 volts)
1.16 Circuit breaker tripped or
damaged
Clean and tighten
Clean and tighten
Replace
Charge battery
Check for blown fuse, loose terminals
or broken wire or cable
Reset or replace
1.21 Transmission not in Park
1.22 Chrysler Slide Door Master Lock
Out switch in OFF position
1.23 Slide door handles have been
manually operated
1.24 Loose connection
1.25 Broken wire
1.26 Wire terminal
1.27 Control switch damaged
1.28 OEM keyless transmitter (FOB)
does not function properly or
damaged
1.29 Braun electronic controller
Engage transmission in Park
Press switch to ON position
Press a control switch
Clean and tighten
Repair or replace
Crimp tightly to wire
Replace
Relocate to avoid interference, replace
battery or replace transmitter. See
OEM owner's manual.
Press main electronic controller reset
button and try operation again. If no
operation - run serial diagnostics test.
If no operation - contact Braun Product
Support.
Page 7
TROUBLESHOOTING
FUNCTION
SYMPTOM
2.10
No
Lower
Operation
POSSIBLE CAUSE
2.11 See 1.00
2.12 Kneel On/Off switch is in OFF
position.
2.13 Actuator harness disconnected or
otherwise damaged
2.14 Actuator damaged.
2.15 Chain disconnected or otherwise
damaged
REMEDY
Press switch to ON position
Connect, repair or replace
Replace if damaged.
Connect, repair or replace
2.00
KNEEL
SYSTEM
(LOWER)
2.20
Faulty
Kneel
(Lower)
Operation
3.10
No Open
Operation
(Motor Does
Not Run)
3.00
POWER
DOOR
(OPEN)
3.20
Motor Runs
But Door
Does Not
Move
3.30
Faulty
Open
Operation
3.40
Door Does
Not Open
Fully
Page 8
2.21 Mechanical binding
2.22 Misalignment or damage to kneel
system components. Inspect
kneel actuator assembly for:
• Actuator mounting pin securement (loose or missing)
• Inspect chain for wear, misalignment, or other damage
• Inspect chain pulley for securement, wear, misalignment or
damage
Check and correct
Connect, replace or otherwise correct
as needed
3.11 See 1.00
3.12 Door master lock-out switch ON
3.13 Power door motor harness disconnected or damaged
3.14 Power door motor damaged
Switch master lock-out switch to OFF
Correct or contact Braun Product
Support
Contact Chrysler Service Center
3.21 Misaligned or otherwise damaged
drive cable or door track
3.22 Power door motor clutch failure
Correct or contact Braun Product
Support
Contact Chrysler Service Center
3.31 Obstruction in door path
3.32 Mechanical binding
Remove obstruction
Check and correct
3.41 Door doesn't catch full open position hold latch
3.42 See 3.30
Correct or contact Braun Product
Support
TROUBLESHOOTING
FUNCTION
SYMPTOM
POSSIBLE CAUSE
4.11 See 1.00 and 3.41
4.12 No door full open signal
4.10
No Unfold
(Deploy)
Operation
4.00
FOLDOUT
RAMP
DEPLOY
4.20
Ramp
Contacts
Door
4.30
Faulty
Unfold
(Deploy)
Operation
4.40
Faulty Ramp
Extension
Unfold
(Deploy)
5.00
FOLDOUT
RAMP
STOW
4.13 Ramp motor harness disconnected or damaged
4.14 Loose, damaged or missing fold
arm securement collar/coupling
and/or screws
4.15 Ramp Deploy microswitch out of
adjustment or damaged
4.16 Ramp motor damaged
4.21 Door not fully open
REMEDY
Correct or contact Braun Product
Support
Connect, repair or replace
Tighten, replace or otherwise correct
as needed
Check connection, adjust or replace
- See page 11
Replace motor
Correct or contact Braun Product
Support
4.22 See 3.41
4.31 Ramp Deploy microswitch harness disconnected or damaged
4.32 Misalignment or damage to:
• Ramp fold bearing
• Ramp fold arm
• Ramp fold arm bearing slot
• Ramp pivot points or hinge(s)
4.33 Mechanical binding
4.34 See 3.41 and 4.15
4.35 Obstruction detected resulting in
excessive motor current
Connect, repair or replace
4.41 Ramp extension chain broken,
detached, misaligned or otherwise damaged
4.42 Lack of lubrication
Replace, attach, realign or otherwise
correct
4.43 Ramp hinge damage
4.44 See 4.35
5.10
No Fold
(Stow)
Operation
5.11 See 1.00
5.12 Ramp Stow Position microswitch
out of adjustment or damaged
5.13 Controller doesn't receive door
close signal
5.14 See 4.13, 4.14 and 4.16
5.20
Faulty
Fold (Stow)
Operation
5.21 Ramp Stow Position microswitch
harness disconnected or damaged
5.22 Fold arm support/stop out of adjustment
5.23 See 3.41, 4.13, 4.14, 4.32, 4.33,
4.35, 4.42 and 4.43
Realign, tighten, replace damaged
parts or otherwise correct as needed
Check and correct
Press main electronic controller reset
button and try again. If no operation
- contact Braun Product Support.
Lubricate - See Maintenance and
Lubrication Schedule
Correct or replace as needed
Check connection, adjust or replace.
Correct or contact Braun Product
Support
Connect, repair or replace
Adjust support/stop for more travel
Page 9
TROUBLESHOOTING
FUNCTION
SYMPTOM
POSSIBLE CAUSE
6.10
No
Close
Operation
6.11 See 3.10 and 4.12
6.12 Controller did not see stowed
signal
REMEDY
Correct or contact Braun Product
Support
6.20
Motor Runs - Door
Does Not Move
6.00
POWER
DOOR
(CLOSE)
6.30
Faulty
Operation
6.40
Door Does
Not Close
Fully (Door
Kickback)
6.50
Door Contacts
Ramp When
Closing
7.10
7.00
KNEEL
SYSTEM
(RAISE)
No Raise
Operation
7.20
Faulty
Operation
Page 10
6.21 See 3.20
6.31 See 3.30
6.41 See 3.30
6.42 Ramp obstructing door
6.51 Ramp Stow Position microswitch
out of adjustment
Adjust ramp Stow Position microswitch inward (toward cabin area)
- See next page
Adjust Ramp Stow Position microswitch inward (toward cabin area)
- See next page
6.52 See 4.40 and 5.20
7.11 See 1.00, 2.12, 2.13, 2.14 and
2.15
7.21 See 2.20
Connect/repair harness or replace
microswitch
MICROSWITCHES
Ramp Microswitch Adjustment
The ramp motor assembly is equipped with two
microswitches, the deploy microswitch and stow
position microswitch.
The stow position microswitch determines the full
stow position (how far the ramp stows inside the
vehicle).
The deploy microswitch cuts the ramp motor
when the platform reaches a position where the
ramp will complete the deploy function by the
force of gravity (ramp to ground level).
Remove the ramp motor assembly interior cover to
access microswitches (located rear of the passenger slide door).
Stow Position
Microswitch
Slider
Assembly
Adjustment
Screw
Deploy
Microswitch
Cam
Ram
p
mp
a
R
Stow Position Microswitch Adjustment: An
adjustment screw moves the position of the stow position slider assembly inward and outward. Turn the
screw clockwise to adjust the ramp stowed position
inward. Turn the screw counter-clockwise to adjust
the ramp position outward. Ensure the ramp does
not obstruct the power slide door (check per following procedure).
Door Obstruction: Manually open the slide door
fully. Move the top of the ramp out slightly until the
ramp enters the path of the door. Press a control
switch. Caution: Observe and stop door if ramp
does not stow fully to avoid damage. If the ramp
stows fully and the door closes completely, the microswitch is adjusted properly. If the door contacts
the ramp and kicks back or does not cinch, the stow
microswitch needs to be adjusted inward. Adjust
microswitch slider slightly and repeat procedures.
Deploy Microswitch Adjustment: The deploy
microswitch is cam activated. The microswitch is
secured with two mounting screws. The microswitch
can slide in a rotary motion to change it's position
is relation to the cam. The deploy microswitch cuts
power to the ramp motor, allowing the ramp to gravity down and complete the deploy function. Adjust
the switch to allow gravity to complete the deploy
operation. Ensure the ramp motor shuts off before
the ramp reaches the horizontal position or below.
Page 11
BELOW FLOOR OBSTRUCTIONS
2006 & 2007* Chrysler Lowered Floor Minivan (Foldout Ramp) Conversion
When installing an
electrical tie-down,
power seat or other
auxiliary device, obstructions below the
floor must be avoided.
Obstructions include
wiring, fuel system,
brake lines, etc. Installers must be aware
of these obstructions.
Refer to this illustration when installing
aftermarket equipment
to avoid contacting or
damaging vital components under the floor.
Drilling or cutting
into such obstructions may result in
potential hazards
as well as property
damage.
Note: Some wiring
harnesses shown may
not be present. Avoid
all harness locations.
* Note: Diagram includes some late 2005
conversions.
Color Key
O.E.M. Wiring
Braun Wiring
Occupant Restraint
Controller
Charcoal
Canister
Fuse
Blocks
Fuel System
Brake System
Heat & A/C
Charcoal
Vent Line
SIR
Terminator
SIR
Terminator
Driver
Receptacle
Station
Seat Belt
Sensor
Side Impact
Sensor
Side Impact
Sensor
Emergency
Brake
Cables
Passenger
Receptacle
Station
Side Impact
Sensor
Brake
Lines
Side Impact
Sensor
Fuel Fill
Hose
WARNING
Check for obstructions such as wires,
gas lines, exhaust,
etc. before drilling
or cutting through
floor. Failure to do so
may result in serious
bodily injury and/or
property damage.
Page 12
Rear Heat
Lines
Side Impact
Sensor
Fuel Fill
Vent Line
Rear A/C
Lines
Quec (U
a
eeded
co
e to
a
p essed)
see
dat
Braun
Controller
Fuel
Tank
Main Fuel Line
(Fuel Pump to Engine)
AUXILIARY POWER SUPPLY
Auxiliary Power Supply: Do
not connect auxiliary devices
directly to the vehicle battery.
Doing so may result in damage to electrical system and/
or electronic components.
Below Floor Obstructions:
When installing aftermarket equipment, obstructions below the floor
must be avoided. Obstructions
include wiring, fuel system, brake
lines, etc. Installers must be
aware of these obstructions.
Refer to the illustration on previous page to avoid contacting or
damaging vital components under
the floor.
F4
25
F2
F3
F1
F2
F3
F4
OPEN
OPEN
OPEN
The installer is responsible for
supplying the correct gauge
wire and fuse for the particular
device to be attached to the fuse
block (as specified by the manufacturer of the device).
F1
40
Battery Fuse Block: The total
maximum load must not exceed
40 amperes.
OPEN
The Battery fuse block provides
power at all times (independent of
the vehicle ignition). The Ignition
fuse block supplies power only
when the vehicle ignition is on.
Ignition Fuse Block: The total
maximum load must not exceed
40 amperes.
Under Dash Fuse Blocks
OPEN
Fuse Specifications:
Risk of electrical fire!
Install and electrically
terminate auxiliary
electrical device as
specified by device
manufacturer.
OPEN
Fuse Blocks: Two fuse blocks
are provided for use as an auxiliary power source (one Ignition
fuse block and one Battery fuse
block).
WARNING
29428
Do not connect
auxiliary devices to
vehicle battery. Doing
so may result in damage to electrical system and/or electronic
components.
Two fuse blocks are provided
as an auxiliary power source for
dealer-installed auxiliary electrical
device(s). Fuse block details and
specifications are provided below.
The fuse blocks are located under
the glove box.
29429
CAUTION
Note: If installing an auxiliary
electrical device that requires
more than a 40 ampere power
source, an alternative power
source must be provided.
Page 13
BLANK for LAYOUT
Page 14
2006 & 2007* Chrysler Conversion (Foldout Ramp) Switch and Component Location Diagram
*Note: Diagram
includes some late
2005 conversions.
Master Lock
Out Switch
Overhead
Console Switch
B-Pillar Switch
C-Pillar Switch
Ramp
Press switch
displaying this
graphic.
ON
OFF
Press and release
switch displaying
slide door graphic.
Press and release
switch displaying
slide door graphic.
Press and release
switch displaying
slide door graphic.
F2
F3
F4
29428
F1
29429
F4
40
F2
F3
25
OPEN
OPEN
F1
OPEN
OPEN
OPEN
OPEN
Kneel System
Under Dash
Fuse Block
Center Console
Switch
Center Console
Switch
Kneel ON/OFF
Switch
Press this
switch to ON
to activate
kneel feature.
Press and release
switch displaying
slide door graphic.
Page 15A
Press and release
switch displaying
slide door graphic.
Press this
switch to OFF
to disable
kneel feature.
Remote Keyless
Entry Transmitter
Press and
release
switch
twice (x2)
within five
seconds.
Controller
Controller
E50678-REV C
Page 16A
20
Sw 06 U
n
Lo itch & fol
2
ca & 0 d
ti C 07 for
on o F :
D mp old
ia o o
gr ne u
am n t
t
Wiring Diagram - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Power Door, Foldout Ramp & Kneel System (with Curtain Air bags)
*Note: Diagram includes some late 2005 conversions.
TO: Figure 1
Wall-Mounted
Open / Close
Switch
E50060MMS
Kneel
ON/OFF
Switch
31022
3-COND WIRE CODE
NO.
COLOR
1
WHITE (20 GA.)
2
NOT USED
3
VIOLET (20 GA.)
Wall-Mounted
Open / Close
Switch
E50060MMS
3-COND WIRE CODE
ON
32 1
10-COND WIRE CODE
10-COND WIRE CODE
NO.
COLOR
1
BLACK (14 GA.)
2
BLACK / TAN (20 GA.)
3
BLACK / LIGHT GREEN (20 GA.)
4
BLACK / BLUE (20 GA.)
5
LIGHT BLUE / BLUE (18 GA.)
BLACK / RED (14 GA.)
NO.
COLOR
6
1
WHITE (20 GA.)
7
BLACK (20 GA.)
2
NOT USED
8
BLACK / VIOLET (20 GA.)
3
VIOLET (20 GA.)
32 1
9
NOT USED
10
WHITE / LIGHT GREEN (18 GA.)
NO.
COLOR
1
BLACK / BLUE (20 GA.)
2
BLACK / TAN (20 GA.)
3
BLACK / LIGHT GREEN (20 GA.)
4
BLACK (14 GA.)
5
NOT USED
6
NOT USED
7
BLACK / GREY (20 GA.)
8
BLACK / VIOLET (20 GA.)
9
NOT USED
10
BLACK / RED (14 GA.)
10-COND WIRE CODE
10-COND WIRE CODE
NO.
COLOR
NO.
1
BLACK (14 GA.)
1
BLACK (14 GA.)
2
BLACK / TAN (20 GA.)
2
BLACK / TAN (20 GA.)
COLOR
3
BLACK / LIGHT GREEN (20 GA.)
BLACK / LIGHT GREEN (20 GA.)
3
4
BLACK / BLUE (20 GA.)
4
BLACK / BLUE (20 GA.)
5
LIGHT BLUE / BLUE (18 GA.)
5
LIGHT BLUE / BLUE (18 GA.)
6
BLACK / RED (14 GA.)
6
7
BLACK / GREY (20 GA.)
7
BLACK / GREY (20 GA.)
8
BLACK / VIOLET (20 GA.)
8
BLACK / VIOLET (20 GA.)
BLACK / RED (14 GA.)
9
NOT USED
9
NOT USED
10
WHITE / LIGHT GREEN (18 GA.)
10
WHITE / LIGHT GREEN (18 GA.)
E50739A
WH - 20G
OR - 20G
OFF
E50547A
TO: C309 Body Side
TO: OEM Side Impact Sensor
WH - 20G
Ground
2-COND WIRE CODE
BK - 16G
NOT USED
1
NOT USED
BLUE / WHITE (18 GA.)
2
BLUE / WHITE (18 GA.)
LIGHT GREEN / GREEN (18 GA.)
3
GREEN (9 COND.)
4
NOT USED
4
NOT USED
5
VIOLET (18 GA.)
5
VIOLET (9 COND.)
6
BLACK / WHITE (18 GA.)
6
BLACK (9 COND.)
7
BLACK (18 GA.)
7
BLACK (20 GA.)
8
NOT USED
8
9
YELLOW / WHITE (18 GA.)
9
YELLOW (9 COND.)
10
NOT USED
10
NOT USED
11
NOT USED
11
NOT USED
WHITE / VIOLET (18 GA.)
12
WHITE (9 COND.)
13
ORANGE / LIGHT BLUE (18 GA.)
13
ORANGE (9 COND.)
14
VIOLET (18 GA.)
14
VIOLET (20 GA.)
15
WHITE (18 GA.)
15
WHITE (20 GA.)
NO.
COLOR
1
BLACK / VIOLET (20 GA.)
2
VIOLET (20 GA.)
3
BLACK / WHITE (18 GA.)
4
BLACK (20 GA.)
5
BLACK / GREY (20 GA.)
6
ORANGE (20 GA.)
16
NOT USED
16
NOT USED
1
ORANGE / BLACK (12 GA.)
17
NOT USED
17
NOT USED
18
NOT USED
18
NOT USED
1
WHITE (9 COND.)
19
NOT USED
19
NOT USED
2
VIOLET (9 COND.)
3
RED (12 GA.)
NO.
BLACK (12 GA.)
20
NOT USED
20
NOT USED
3
5
BLUE / BLACK (12 GA.)
21
NOT USED
21
NOT USED
4
BLACK (9 COND.)
6
WHITE (12 GA.)
22
NOT USED
22
NOT USED
5
YELLOW (9 COND.)
23
NOT USED
23
NOT USED
6
ORANGE(9 COND.)
24
NOT USED
24
NOT USED
Controller
E50678-REV C
BK - 10G
E50670A
RD - 10G
GREEN (9 COND.)
3-COND WIRE CODE
COLOR
1
WHITE (20 GA.)
2
NOT USED
3
VIOLET (20 GA.)
Ground
TO: Fuse Block (Battery)
WH - 20G
Ground
E50536A
E50538A
2-COND WIRE CODE
4-COND WIRE CODE
NO.
COLOR
NO.
COLOR
NO.
COLOR
1
RED (12 GA.)
1
RED (10 GA.)
1
WHITE (12 GA.)
2
BLUE / BLACK (12 GA.)
NO.
COLOR
2
ORANGE / BLACK (12 GA.)
2
ORANGE / BLACK (12 GA.)
1
WHITE / VIOLET (18 GA.)
3
WHITE / ORANGE / RED (12 GA.)
3
WHITE / RED / ORANGE (12 GA.)
2
NOT USED
4
BLACK (12 GA.)
4
BLACK (10 GA.)
3
VIOLET (18 GA.)
4
WHITE (18 GA.)
6-COND WIRE CODE
6-COND WIRE CODE
NO.
COLOR
NO.
COLOR
1
WHITE / RED / ORANGE (12 GA.)
1
WHITE / RED / ORANGE (12 GA.)
2
ORANGE / BLACK (12 GA.)
2
ORANGE / BLACK (12 GA.)
3
BLACK (20 GA.)
3
4
WHITE (20 GA.)
4
WHITE (20 GA.)
5
WHITE / BLACK (14 GA.)
5
WHITE / BLACK (14 GA.)
6
NOT USED
6
NOT USED
BLACK (20 GA.)
52038-96A8
VIOLET (18 GA.)
6
ORANGE / LIGHT BLUE (18 GA.)
7
LIGHT GREEN / GREEN (18 GA.)
8
BLACK / WHITE (18 GA.)
9
BLUE / WHITE (18 GA.)
10
NOT USED
11
BLACK (18 GA.)
12
YELLOW / WHITE (18 GA.)
3-COND WIRE CODE
3-COND WIRE CODE
NO.
COLOR
NO.
COLOR
1
WHITE (12 GA.)
1
BLUE / BLACK (12 GA.)
2
NOT USED
2
NOT USED
3
BLUE / BLACK (12 GA.)
3
WHITE (12 GA.)
Kneel Actuator
Microswitch
Stow 33421A
Page 15B
NO.
WH/BK - 14G
4-COND WIRE CODE
5
32 1
COLOR
4
12-COND WIRE CODE
Passenger C-Pillar
Wall-Mounted
Open / Close Switch
E50178MMS
6-COND WIRE CODE
COLOR
WHITE / ORANGE / RED (12 GA.)
LIGHT BLUE / BLUE (18 GA.)
TO: J3 of E50737A
Magnetic
Entry
E50250A01
NO.
2
WHITE / LIGHT GREEN (18 GA.)
2
6-COND WIRE CODE
RD - (Switch)
12
COLOR
1
Ground
COLOR
3
BK / WH - 18G
WH - (Switch)
NO.
2
1
6-COND WIRE CODE
24-COND WIRE CODE
COLOR
BK - (Switch)
24-COND WIRE CODE
NO.
BL/WH - 18G
WH - 16G
NO.
Microswitch
Deploy 23184
Ramp Motor
& Gear Box
Page 16B
Wiring Diagram - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Power Door, Foldout Ramp & Kneel System (without Curtain Air Bags)
*Note: Diagram includes some late 2005 conversions.
TO: Figure 1
Wall-Mounted
Open / Close
Switch
E50060MMS
Kneel
ON/OFF
Switch
31022
3-COND WIRE CODE
NO.
COLOR
1
WHITE (20 GA.)
2
NOT USED
3
VIOLET (20 GA.)
Wall-Mounted
Open / Close
Switch
E50060MMS
8-COND WIRE CODE
3-COND WIRE CODE
ON
32 1
10-COND WIRE CODE
NO.
COLOR
1
BLACK (14 GA.)
2
BLACK / TAN (20 GA.)
3
BLACK / LIGHT GREEN (20 GA.)
NO.
COLOR
4
BLACK / BLUE (20 GA.)
1
WHITE (20 GA.)
5
BLACK (20 GA.)
2
NOT USED
6
BLACK / VIOLET (20 GA.)
3
VIOLET (20 GA.)
7
NOT USED
8
BLACK / RED (14 GA.)
32 1
NO.
COLOR
1
BLACK / BLUE (20 GA.)
2
BLACK / TAN (20 GA.)
3
BLACK / LIGHT GREEN (20 GA.)
4
BLACK (14 GA.)
5
NOT USED
6
NOT USED
7
BLACK / GREY (20 GA.)
8
BLACK / VIOLET (20 GA.)
9
NOT USED
10
BLACK / RED (14 GA.)
8-COND WIRE CODE
8-COND WIRE CODE
NO.
COLOR
NO.
1
BLACK (14 GA.)
1
BLACK (14 GA.)
2
BLACK / TAN (20 GA.)
2
BLACK / TAN (20 GA.)
COLOR
3
BLACK / LIGHT GREEN (20 GA.)
BLACK / LIGHT GREEN (20 GA.)
3
4
BLACK / BLUE (20 GA.)
4
5
BLACK / GREY (20 GA.)
5
BLACK / GREY (20 GA.)
6
BLACK / VIOLET (20 GA.)
6
BLACK / VIOLET (20 GA.)
7
NOT USED
7
NOT USED
8
BLACK / RED (14 GA.)
8
BLACK / RED (14 GA.)
BLACK / BLUE (20 GA.)
E50738A
WH - 20G
OR - 20G
OFF
WH - 20G
BK / WH - 18G
6-COND WIRE CODE
1
COLOR
ORANGE / BLACK (12 GA.)
WHITE / ORANGE / RED (12 GA.)
2
NO.
1
NOT USED
1
NOT USED
2
BLUE / WHITE (18 GA.)
2
BLUE / WHITE (18 GA.)
COLOR
3
LIGHT GREEN / GREEN (18 GA.)
3
GREEN (9 COND.)
4
NOT USED
4
NOT USED
5
VIOLET (18 GA.)
5
VIOLET (9 COND.)
6
BLACK / WHITE (18 GA.)
6
BLACK (9 COND.)
7
BLACK (18 GA.)
7
BLACK (20 GA.)
8
NOT USED
8
9
YELLOW / WHITE (18 GA.)
9
YELLOW (9 COND.)
10
NOT USED
10
NOT USED
11
NOT USED
11
NOT USED
12
WHITE / VIOLET (18 GA.)
12
WHITE (9 COND.)
13
ORANGE / LIGHT BLUE (18 GA.)
13
ORANGE (9 COND.)
14
VIOLET (18 GA.)
14
VIOLET (20 GA.)
15
WHITE (18 GA.)
15
WHITE (20 GA.)
16
NOT USED
16
NOT USED
17
NOT USED
17
NOT USED
18
NOT USED
18
NOT USED
BK - 16G
BL/WH - 18G
WH - 16G
6-COND WIRE CODE
Ground
NO.
COLOR
1
BLACK / VIOLET (20 GA.)
2
VIOLET (20 GA.)
3
BLACK / WHITE (18 GA.)
4
BLACK (20 GA.)
5
BLACK / GREY (20 GA.)
6
ORANGE (20 GA.)
Magnetic
Entry
E50250A01
6-COND WIRE CODE
NO.
COLOR
1
WHITE (9 COND.)
2
VIOLET (9 COND.)
19
19
NOT USED
4
BLACK (12 GA.)
20
NOT USED
20
NOT USED
3
5
BLUE / BLACK (12 GA.)
21
NOT USED
21
NOT USED
4
BLACK (9 COND.)
6
WHITE (12 GA.)
22
NOT USED
22
NOT USED
5
YELLOW (9 COND.)
23
NOT USED
23
NOT USED
6
ORANGE(9 COND.)
24
NOT USED
24
NOT USED
RED (12 GA.)
BK - 10G
Controller
E50678-REV C
Passenger C-Pillar
Wall-Mounted
Open / Close Switch
E50178MMS
RD - (Switch)
NOT USED
3
TO: J3 of E50737A
24-COND WIRE CODE
COLOR
WH - (Switch)
24-COND WIRE CODE
NO.
BK - (Switch)
Ground
NO.
E50548A
TO: C309 Body Side
E50670A
RD - 10G
32 1
GREEN (9 COND.)
3-COND WIRE CODE
NOT USED
3
VIOLET (20 GA.)
WH - 20G
Ground
E50536A
E50538A
6-COND WIRE CODE
2-COND WIRE CODE
4-COND WIRE CODE
NO.
COLOR
NO.
COLOR
NO.
COLOR
1
RED (12 GA.)
1
RED (10 GA.)
1
WHITE (12 GA.)
2
BLUE / BLACK (12 GA.)
NO.
COLOR
2
ORANGE / BLACK (12 GA.)
2
ORANGE / BLACK (12 GA.)
1
WHITE / VIOLET (18 GA.)
3
WHITE / ORANGE / RED (12 GA.)
3
WHITE / RED / ORANGE (12 GA.)
2
NOT USED
4
BLACK (12 GA.)
4
BLACK (10 GA.)
3
VIOLET (18 GA.)
4
WHITE (18 GA.)
6-COND WIRE CODE
NO.
COLOR
NO.
COLOR
1
WHITE / RED / ORANGE (12 GA.)
1
WHITE / RED / ORANGE (12 GA.)
2
ORANGE / BLACK (12 GA.)
2
ORANGE / BLACK (12 GA.)
BLACK (20 GA.)
3
4
WHITE (20 GA.)
4
WHITE (20 GA.)
5
WHITE / BLACK (14 GA.)
5
WHITE / BLACK (14 GA.)
6
NOT USED
6
NOT USED
BLACK (20 GA.)
52038-96A8
VIOLET (18 GA.)
6
ORANGE / LIGHT BLUE (18 GA.)
7
LIGHT GREEN / GREEN (18 GA.)
8
BLACK / WHITE (18 GA.)
9
BLUE / WHITE (18 GA.)
10
NOT USED
11
BLACK (18 GA.)
12
YELLOW / WHITE (18 GA.)
3-COND WIRE CODE
3-COND WIRE CODE
NO.
COLOR
NO.
COLOR
1
WHITE (12 GA.)
1
BLUE / BLACK (12 GA.)
2
NOT USED
2
NOT USED
3
BLUE / BLACK (12 GA.)
3
WHITE (12 GA.)
Kneel Actuator
Microswitch
Stow 33421A
Page 17A
WHITE (20 GA.)
2
Ground
TO: Fuse Block (Battery)
3
5
COLOR
1
WH/BK - 14G
4-COND WIRE CODE
12-COND WIRE CODE
NO.
Microswitch
Deploy 23184
Ramp Motor
& Gear Box
Page 18A
Co 2
0 W U
w nv 06 iri nfo
it er & ng l
d
ho si
ut on 20 Dia fo
r
Cu (F 07 gr :
o
a
C
rt ld h m
ai o r
n ut ys
A R le
ir a r
ba m
gs p)
Wiring Diagram - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Front Passenger Seat Electrical Systems (Memory)
4
BLUE / YELLOW - 18G
5
BLUE / GREEN - 18G
6
LT GREEN / BROWN - 18G
7
WHITE / ORANGE - 18G
8
ORANGE / RED - 18G
9
LT BLUE / TAN - 18G
10
WHITE / VIOLET - 18G
11
BLACK / LT GREEN - 18G
12
NOT USED
13
NOT USED
14
LT GREEN / LT BLUE -18G
15
WHITE / PINK - 18G
16
LT BLUE / GREY - 18G
BK/OR - 14G
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
OR/RD - 14G
LT BL/TN - 18G
WH/VT - 18G
BK/LT GN - 18G
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
26-COND WIRE CODE
COLOR
1
LT GREEN / DK BLUE - 14G
2
NOT USED
3
TAN / BLUE - 18G
4
NOT USED
5
TAN - 18G
6
ORANGE / GREEN - 18G
7
ORANGE / LT BLUE - 18G
8
TAN / VIOLET - 18G
9
TAN / YELLOW - 18G
10
NOT USED
11
WHITE / VIOLET - 18G
12
NOT USED
13
LT GREEN / TAN - 14G
14
NOT USED
15
NOT USED
16
VIOLET / TAN - 18G
17
TAN / LT GREEN - 14G
18
TAN / GREEN - 18G
19
VIOLET / BROWN - 18G
20
VIOLET / WHITE - 18G
21
NOT USED
3
NOT USED
16
NOT USED
29
NOT USED
LT GN/DK BL - 14G
TN/BU - 18G
TN - 18G
OR/GN - 18G
OR/LT BL - 18G
TN/VT - 18G
TN/YL - 18G
WH/VT - 18G
LT GN/TN - 14G
VT/TN - 18G
TN/LT GN - 18G
TN/GN - 18G
VT/BN - 18G
VT/WH - 18G
NOT USED
17
NOT USED
30
5
NOT USED
18
LT GREEN / WHITE - 18G
31
NOT USED
6
WHITE / ORANGE - 18G
19
WHITE / PINK - 18G
32
BLACK - 18G
7
WHITE / VIOLET - 18G
20
ORANGE / RED - 14G
33
BLACK - 18G
8
NOT USED
21
NOT USED
34
LT BLUE / GREY - 18G
9
BLACK / LT GREEN - 18G
22
NOT USED
35
LT BLUE / TAN - 18G
NOT USED
23
NOT USED
36
BLACK - 18G
11
LT GREEN / LT BLUE - 18G
24
NOT USED
37
BLACK - 18G
12
NOT USED
25
NOT USED
13
NOT USED
26
NOT USED
E50378A0501
PASSENGER SEAT
28891
COLOR
PIN
COLOR
PIN
COLOR
1
PINK / ORANGE - 18G
14
NOT USED
27
BLUE / YELLOW - 18G
2
LT GREEN / BROWN - 18G
15
BLACK / ORANGE - 14G
28
BLUE / GREEN - 18G
3
NOT USED
16
NOT USED
29
NOT USED
4
NOT USED
17
NOT USED
30
NOT USED
5
NOT USED
18
LT GREEN / WHITE - 18G
31
NOT USED
6
WHITE / ORANGE - 18G
19
WHITE / PINK - 18G
32
BLACK / RED - 18G
7
WHITE / VIOLET - 18G
20
ORANGE / RED - 14G
33
BLACK / WHITE - 18G
8
NOT USED
21
NOT USED
34
LT BLUE / GREY - 18G
9
BLACK / LT GREEN - 18G
22
NOT USED
35
LT BLUE / TAN - 18G
10
NOT USED
23
NOT USED
36
BLACK / WHITE - 18G
37
BLACK / RED - 18G
11
LT GREEN / LT BLUE - 18G
24
NOT USED
12
NOT USED
25
NOT USED
13
NOT USED
26
NOT USED
37-COND WIRE CODE
PIN
COLOR
1
LT GREEN / DK BLUE - 14G
PIN
COLOR
14
VIOLET / WHITE - 18G
27
NOT USED
2
TAN / DK BLUE - 18G
15
BLACK / ORANGE - 14G
28
NOT USED
3
TAN - 18G
16
LT GREEN / GREY - 18G
29
NOT USED
4
ORANGE / GREEN - 18G
17
LT GREEN / TAN - 18G
30
NOT USED
5
LT ORANGE / LT BLUE - 18G
18
PINK / GREEN - 18G
31
NOT USED
6
TAN / VIOLET - 18G
19
WHITE / PINK - 18G
32
NOT USED
7
TAN / YELLOW - 18G
20
ORANGE / RED - 14G
33
NOT USED
8
WHITE / VIOLET - 18G
21
LT GREEN / YELLOW -18G
34
NOT USED
9
LT GREEN / TAN - 14G
22
LT GREEN / GREEN - 18G
35
NOT USED
10
VIOLET / TAN - 18G
23
NOT USED
36
BLACK - 18G
37
BLACK - 18G
NOT USED
11
TAN / LT GREEN - 18G
24
LT GREEN / WHITE - 18G
NOT USED
12
TAN / DK GREEN - 18G
25
LT GREEN / ORANGE - 18G
NOT USED
13
VIOLET / BROWN - 18G
26
NOT USED
25
NOT USED
NOT USED
TO: C304
(SEAT SIDE)
COLOR
1
LT GREEN /YELLOW - 18G
2
LT GREEN / GREEN - 18G
3
LT GREEN / ORANGE - 18G
4
LT GREEN / WHITE - 18G
COLOR
1
BLACK / ORANGE - 14G
2
LT GREEN / GREY - 18G
3
LT GREEN / TAN - 18G
4
PINK / GREEN - 18G
5
NOT USED
6
WHITE / PINK - 18G
7
ORANGE / RED - 14G
8
NOT USED
9
NOT USED
10
NOT USED
11
NOT USED
12
NOT USED
13
NOT USED
Page 17B
COLOR
E50565A
LT GN/YL - 18G
LT GN/GN - 18G
LT GN/OR - 18G
LT GN/WH - 18G
13-COND WIRE CODE
PIN
PIN
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
TOP
4-COND WIRE CODE
PIN
E50737A
PK/OR - 18G
LT GN/BN - 18G
WH/OR - 18G
WH/VT - 18G
BK/LT GN - 18G
LT GN/LT BL - 18G
BK/OR - 14G
LT GN/WH - 18G
WH/PK - 18G
OR/RD - 14G
BL/YL - 18G
BL/GN - 18G
BK/RD - 18G
BK/WH - 18G
LT BL/GY - 18G
LT BL/TN - 18G
BK/WH - 18G
BK/RD - 18G
OR/RD - 14G
TO: BATTER FUSE BLOCK (FB2 - F4)
WH/PK - 18G
TO: IGNITION FUSE BLOCK
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
LT BL/TN - 14G
WH/VT - 18G
BK/LT GN - 18G
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
BK/WH - 18G
WH/PK - 18G
LT BL/GY - 18G
BK - 18G
LT BL/YL - 18G
LT BL/TN - 18G
BL/GN - 18G
16-COND WIRE CODE
PIN
COLOR
1
NOT USED
2
LT GREEN / WHITE - 18G
3
PINK / ORANGE - 18G
4
BLUE / YELLOW - 18G
5
BLUE / GREEN - 18G
6
LT GREEN / BROWN - 18G
7
WHITE / ORANGE - 18G
8
NOT USED
9
LT BLUE / TAN - 18G
10
WHITE / VIOLET - 18G
11
BLACK / LT GREEN - 18G
12
NOT USED
13
NOT USED
14
LT GREEN / LT BLUE - 18G
15
WHITE / PINK - 18G
16
LT BLUE / GREY - 18G
37-COND WIRE CODE
PIN
23
26
NOT USED
10
24
22
TO: C305 (SEAT SIDE)
BLUE / GREEN - 18G
DRIVER SEAT
28891
TO: DRIVER SEAT HARNESS (P2)
TO: C322 (SEAT SIDE)
PIN
BLUE / YELLOW - 18G
28
37-COND WIRE CODE
PIN
COLOR
PIN
1
LT GREEN / DK BLUE - 14G
2
TAN / BLUE - 18G
BK/OR - 14G
COLOR
PIN
COLOR
14
VIOLET / WHITE - 18G
27
NOT USED
15
BLACK / ORANGE - 14G
28
NOT USED
TO: BG (502)
12-COND WIRE CODE
26-COND WIRE CODE
PIN
COLOR
PIN
COLOR
1
LT GREEN / DK BLUE - 14G
14
NOT USED
2
NOT USED
15
NOT USED
3
TAN / DK BLUE - 18G
16
VIOLET / TAN - 18G
NOT USED
17
5
4
TAN - 18G
18
TAN / GREEN - 18G
6
ORANGE / GREEN - 18G
19
VIOLET / BROWN - 18G
TAN / LT GREEN - 18G
7
ORANGE / LT BLUE - 18G
20
VIOLET / WHITE - 18G
8
TAN / VIOLET - 18G
21
NOT USED
9
TAN / YELLOW - 18G
22
NOT USED
10
NOT USED
23
NOT USED
WHITE / VIOLET - 18G
24
11
NOT USED
12
NOT USED
25
NOT USED
13
LT GREEN / TAN - 14G
26
NOT USED
PIN
COLOR
1
NOT USED
2
WHITE / PINK - 18G
4
LT BLUE / GREY - 18G
5
E50741A
LT GN/DK BL - 14G
TN/BU - 18G
TN - 18G
OR/GN - 18G
OR/LT BL - 18G
TN/VT - 18G
TN/YL - 18G
WH/VT - 18G
LT GN/TN - 14G
VT/TN - 18G
TN/LT GN - 18G
TN/GN - 18G
VT/BN - 18G
VT/WH - 18G
LT BK - 18G
WH/PK - 18G
LT GN/GY - 18G
BK/OR - 18G
LT GN/YL - 18G
LT GN/TN - 18G
LT GN/GN - 18G
NOT USED
6
NOT USED
7
BLACK - 18G
8
NOT USED
9
LT BLUE / YELLOW - 18G
10
LT BLUE / TAN - 18G
11
BLUE / GREEN - 18G
12
NOT USED
12-COND WIRE CODE
PIN
LT GN/DK BL - 14G
TN/BU - 18G
TN - 18G
OR/GN - 18G
OR/LT BL - 18G
TN/VT - 18G
TN/YL - 18G
WH/VT - 18G
LT GN/TN - 14G
VT/TN - 18G
TN/LT GN - 18G
TN/GN - 18G
VT/BN - 18G
VT/WH - 18G
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
LT GN/YL - 18G
LT GN/GN - 18G
BK - 18G
BK/OR - 18G
BLACK / WHITE - 18G
3
COLOR
1
NOT USED
2
LT BLUE - 18G
3
WHITE / PINK - 18G
4
LT GREEN / GREY - 18G
5
NOT USED
6
BLACK / ORANGE - 18G
7
NOT USED
8
NOT USED
9
LT GREEN / YELLOW - 18G
10
LT GREEN / TAN - 18G
11
LT GREEN / GREEN - 18G
12
NOT USED
4-COND WIRE CODE
PIN
COLOR
1
LT GREEN /YELLOW - 18G
2
LT GREEN / GREEN - 18G
3
NOT USED
4
NOT USED
13-COND WIRE CODE
LT GN/YL - 18G
LT GN/GN - 18G
PIN
COLOR
1
BLACK / ORANGE - 12G
2
LT GREEN / GREY - 18G
TAN - 18G
16
LT GREEN / GREY - 18G
29
NOT USED
3
LT GREEN / TAN - 18G
4
ORANGE / GREEN - 18G
17
LT GREEN / TAN - 18G
30
NOT USED
4
PINK / GREEN - 18G
5
ORANGE / LT BLUE - 18G
18
PINK / GREEN - 18G
31
NOT USED
5
NOT USED
6
TAN / VIOLET - 18G
19
WHITE / PINK - 18G
32
NOT USED
6
WHITE / PINK - 18G
7
TAN / YELLOW - 18G
20
ORANGE / RED - 14G
33
NOT USED
7
ORANGE / RED - 14G
3
8
WHITE / VIOLET - 18G
21
LT GREEN / YELLOW -18G
34
NOT USED
9
LT GREEN / TAN - 14G
22
LT GREEN / GREEN - 18G
35
NOT USED
10
VIOLET / TAN - 18G
23
NOT USED
36
BLACK - 18G
37
BLACK / ORANGE - 18G
TO: SIR MODULE
PINK / ORANGE - 18G
COLOR
27
BLACK / ORANGE - 14G
TO: SIR MODULE
LT GREEN / WHITE - 18G
PIN
NOT USED
15
TO: HARNESS E50540A OR E50541A (P3)
TO: C304
(BODY SIDE)
2
3
COLOR
14
LT GREEN / BROWN - 18G
TOP
TO: C306 (SEAT SIDE)
COLOR
BLACK / ORANGE - 14G
PIN
PINK / ORANGE - 18G
2
TO: PASS. SEAT HARNESS (P2)
).
16-COND WIRE CODE
1
COLOR
1
4
Junctions only occur at intersections with junctions symbol (
All other intersections are wire crossings without junctions!
PIN
PIN
BK/WH - 18G
BK/OR - 12G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
8
NOT USED
9
NOT USED
10
NOT USED
11
NOT USED
11
TAN / LT GREEN - 18G
24
NOT USED
12
TAN / GREEN - 18G
25
NOT USED
12
NOT USED
13
VIOLET / BROWN - 18G
26
NOT USED
13
NOT USED
TO: C305 (BODY SIDE)
DRAWING NOTES
37-COND WIRE CODE
TO: 100016-001 MEMORY BOARD
).
TO: DRIVER B-PILLAR (J2)
Junctions only occur at intersections with junctions symbol (
All other intersections are wire crossings without junctions!
TO: C306 (BODY SIDE)
DRAWING NOTES
TO: PASSENGER B-PILLAR (J2)
*Note: Diagram includes some late 2005 conversions.
Page 18B
Wiring Diagram - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Front Passenger Seat Electrical Systems (Non-Memory)
PINK / ORANGE - 18G
4
BLUE / YELLOW - 18G
5
BLUE / GREEN - 18G
6
LT GREEN / BROWN - 18G
7
WHITE / ORANGE - 18G
8
ORANGE / RED - 18G
9
LT BLUE / TAN - 18G
10
WHITE / VIOLET - 18G
11
BLACK / LT GREEN - 18G
12
NOT USED
13
NOT USED
14
LT GREEN / LT BLUE -18G
15
WHITE / PINK - 18G
16
LT BLUE / GREY - 18G
BK/OR - 14G
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
OR/RD - 14G
LT BL/TN - 18G
WH/VT - 18G
BK/LT GN - 18G
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
1
PINK / ORANGE - 18G
2
LT GREEN / BROWN - 18G
3
NOT USED
14
NOT USED
27
BLUE / YELLOW - 18G
15
BLACK / ORANGE - 14G
28
BLUE / GREEN - 18G
16
NOT USED
29
NOT USED
4
NOT USED
17
NOT USED
30
NOT USED
5
NOT USED
18
LT GREEN / WHITE - 18G
31
NOT USED
6
WHITE / ORANGE - 18G
19
WHITE / PINK - 18G
32
BLACK - 18G
7
WHITE / VIOLET - 18G
20
ORANGE / RED - 14G
33
BLACK - 18G
8
NOT USED
21
NOT USED
34
LT BLUE / GREY - 18G
9
BLACK / LT GREEN - 18G
22
NOT USED
35
LT BLUE / TAN - 18G
10
NOT USED
23
NOT USED
36
BLACK - 18G
11
LT GREEN / LT BLUE - 18G
24
NOT USED
37
BLACK - 18G
12
NOT USED
25
NOT USED
13
NOT USED
26
NOT USED
E50378A0501
PASSENGER SEAT
28891
PIN
COLOR
PIN
COLOR
PIN
COLOR
1
PINK / ORANGE - 18G
14
NOT USED
27
BLUE / YELLOW - 18G
2
LT GREEN / BROWN - 18G
15
BLACK / ORANGE - 14G
28
BLUE / GREEN - 18G
3
NOT USED
16
NOT USED
29
NOT USED
4
NOT USED
17
NOT USED
30
NOT USED
COLOR
1
LT GREEN /YELLOW - 18G
2
LT GREEN / GREEN - 18G
3
LT GREEN / ORANGE - 18G
4
LT GN/YL - 18G
LT GN/GN - 18G
LT GN/OR - 18G
LT GN/WH - 18G
5
NOT USED
18
LT GREEN / WHITE - 18G
31
NOT USED
6
WHITE / ORANGE - 18G
19
WHITE / PINK - 18G
32
7
WHITE / VIOLET - 18G
20
ORANGE / RED - 14G
33
BLACK / WHITE - 18G
8
NOT USED
21
NOT USED
34
LT BLUE / GREY - 18G
9
BLACK / LT GREEN - 18G
22
NOT USED
35
LT BLUE / TAN - 18G
10
NOT USED
23
NOT USED
36
BLACK / WHITE - 18G
11
LT GREEN / LT BLUE - 18G
24
NOT USED
37
BLACK / RED - 18G
12
NOT USED
25
NOT USED
13
NOT USED
26
NOT USED
PIN
COLOR
PIN
COLOR
PIN
1
NOT USED
14
NOT USED
27
NOT USED
2
NOT USED
15
BLACK / ORANGE - 14G
28
NOT USED
COLOR
3
NOT USED
16
LT GREEN / GREY - 18G
29
NOT USED
4
NOT USED
17
LT GREEN / TAN - 18G
30
NOT USED
5
NOT USED
18
PINK / GREEN - 18G
31
NOT USED
6
NOT USED
19
WHITE / PINK - 18G
32
NOT USED
7
NOT USED
20
ORANGE / RED - 14G
33
NOT USED
8
NOT USED
21
LT GREEN / YELLOW -18G
34
NOT USED
9
NOT USED
22
LT GREEN / GREEN - 18G
35
NOT USED
10
NOT USED
23
NOT USED
36
BLACK - 18G
37
BLACK - 18G
11
NOT USED
24
LT GREEN / WHITE - 18G
12
NOT USED
25
LT GREEN / ORANGE - 18G
13
NOT USED
26
NOT USED
E50379A0401
TOP
DRIVER SEAT
13-COND WIRE CODE
COLOR
BLACK / ORANGE - 14G
2
LT GREEN / GREY - 18G
3
LT GREEN / TAN - 18G
4
PINK / GREEN - 18G
5
NOT USED
6
WHITE / PINK - 18G
7
ORANGE / RED - 14G
8
NOT USED
9
NOT USED
10
NOT USED
11
NOT USED
12
NOT USED
13
NOT USED
Page 19A
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
TO: DRIVER SEAT HARNESS (P2)
TO: C305 (SEAT SIDE)
28891
1
WH/PK - 18G
TO: IGNITION FUSE BLOCK
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
LT BL/TN - 14G
WH/VT - 18G
BK/LT GN - 18G
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
BK/WH - 18G
WH/PK - 18G
LT BL/GY - 18G
BK - 18G
LT BL/YL - 18G
LT BL/TN - 18G
BL/GN - 18G
16-COND WIRE CODE
PIN
COLOR
1
NOT USED
2
LT GREEN / WHITE - 18G
3
PINK / ORANGE - 18G
4
BLUE / YELLOW - 18G
5
BLUE / GREEN - 18G
6
LT GREEN / BROWN - 18G
7
WHITE / ORANGE - 18G
8
NOT USED
9
LT BLUE / TAN - 18G
10
WHITE / VIOLET - 18G
11
BLACK / LT GREEN - 18G
12
NOT USED
13
NOT USED
14
LT GREEN / LT BLUE - 18G
15
WHITE / PINK - 18G
16
LT BLUE / GREY - 18G
12-COND WIRE CODE
TO: BG (502)
PIN
BLACK / RED - 18G
LT GREEN / WHITE - 18G
PIN
TO: BATTER FUSE BLOCK (FB2 - F4)
BK/OR - 14G
COLOR
1
NOT USED
2
BLACK / WHITE - 18G
3
WHITE / PINK - 18G
4
LT BLUE / GREY - 18G
5
TO: DRIVER B-PILLAR (J2)
TO: C304
(SEAT SIDE)
4-COND WIRE CODE
OR/RD - 14G
37-COND WIRE CODE
37-COND WIRE CODE
PIN
E50737A
PK/OR - 18G
LT GN/BN - 18G
WH/OR - 18G
WH/VT - 18G
BK/LT GN - 18G
LT GN/LT BL - 18G
BK/OR - 14G
LT GN/WH - 18G
WH/PK - 18G
OR/RD - 14G
BL/YL - 18G
BL/GN - 18G
BK/RD - 18G
BK/WH - 18G
LT BL/GY - 18G
LT BL/TN - 18G
BK/WH - 18G
BK/RD - 18G
TO: HARNESS E50540A OR E50541A (P3)
NOT USED
6
NOT USED
7
BLACK - 18G
8
NOT USED
9
LT BLUE / YELLOW - 18G
10
LT BLUE / TAN - 18G
11
BLUE / GREEN - 18G
12
NOT USED
TO: SIR MODULE
LT GREEN / WHITE - 18G
COLOR
12-COND WIRE CODE
PIN
TO: BG (501)
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
LT GN/YL - 18G
LT GN/GN - 18G
BK - 18G
BK/OR - 18G
E50731A
TO: IGNITION FUSE BLOCK
BK - 18G
WH/PK - 18G
LT GN/GY - 18G
BK/OR - 18G
LT GN/YL - 18G
LT GN/TN - 18G
LT GN/GN - 18G
COLOR
1
NOT USED
2
BLACK - 18G
3
WHITE / PINK - 18G
4
LT GREEN / GREY - 18G
5
NOT USED
6
BLACK / ORANGE - 18G
7
NOT USED
8
NOT USED
9
LT GREEN / YELLOW - 18G
10
LT GREEN / TAN - 18G
11
LT GREEN / GREEN - 18G
12
NOT USED
4-COND WIRE CODE
PIN
COLOR
1
LT GREEN /YELLOW - 18G
2
LT GREEN / GREEN - 18G
3
NOT USED
4
NOT USED
TO: SIR MODULE
BLACK / ORANGE - 14G
2
3
PIN
TO: C304
(BODY SIDE)
1
COLOR
LT GN/YL - 18G
LT GN/GN - 18G
37-COND WIRE CODE
13-COND WIRE CODE
PIN
COLOR
PIN
COLOR
PIN
COLOR
PIN
1
NOT USED
14
NOT USED
27
NOT USED
1
NOT USED
2
NOT USED
15
BLACK / ORANGE - 14G
28
NOT USED
2
LT GREEN / GREY - 18G
3
LT GREEN / TAN - 18G
4
PINK / GREEN - 18G
3
NOT USED
16
LT GREEN / GREY - 18G
29
NOT USED
4
NOT USED
17
LT GREEN / TAN - 18G
30
NOT USED
5
NOT USED
18
PINK / GREEN - 18G
31
NOT USED
6
NOT USED
19
WHITE / PINK - 18G
32
NOT USED
7
NOT USED
20
ORANGE / RED - 14G
33
NOT USED
NOT USED
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
5
COLOR
NOT USED
6
WHITE / PINK - 18G
7
ORANGE / RED - 14G
NOT USED
21
LT GREEN / YELLOW -18G
34
8
NOT USED
9
NOT USED
22
LT GREEN / GREEN - 18G
35
NOT USED
9
NOT USED
10
NOT USED
23
NOT USED
36
BLACK - 18G
10
NOT USED
37
BLACK / ORANGE - 18G
8
11
NOT USED
24
NOT USED
11
NOT USED
12
NOT USED
25
NOT USED
12
NOT USED
13
NOT USED
26
NOT USED
13
NOT USED
TO: C305 (BODY SIDE)
COLOR
PIN
TOP
TO: C306 (SEAT SIDE)
PIN
COLOR
BK/OR - 14G
16-COND WIRE CODE
PIN
BK/WH - 18G
WH/PK- 18G
).
TO: PASS. SEAT HARNESS (P2)
Junctions only occur at intersections with junctions symbol (
All other intersections are wire crossings without junctions!
37-COND WIRE CODE
TO: C306 (BODY SIDE)
DRAWING NOTES
TO: PASSENGER B-PILLAR (J2)
*Note: Diagram includes some late 2005 conversions.
Page 20A
20 W U
tr Fr 06 iri nfo
ic on & ng ld
al t
Sy Pa 20 Dia for
st ss 07 gr :
em en C a
m
s ge hry
(N r
s
on Se ler
-M at
em
or
y)
Electrical Schematic - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Power Door, Foldout Ramp & Kneel System (with Curtain Air Bags)
El
ec
*Note: Diagram includes some late 2005 conversions.
KNEEL
ON/OFF
SWITCH
DASH
DOOR
SWITCH
TO: C309
BODY SIDE
10
WH/LT GN - 18G
WH/LT GN - 18G
E50678-REV C
CONTROLLER
WH/VT - 18G
1
2
3
4
5
6
7
8
9
10
11
12
10
11
12
BK - 18G
YL/WH - 18G
1
2
3
4
5
6
1
2
3
4
5
6
OR/BK - 12G
WH/OR/RD - 12G
RD - 12G
BK - 12G
BL/BK - 12G
WH - 12G
ABR.
COLOR
BL
BLUE
LT GN
LIGHT GREEN
BK
BLACK
OR
ORANGE
BR
BROWN
PK
PINK
DK BL
DARK BLUE
RD
GN
GREEN
TN
TAN
GY
GRAY
VT
VIOLET
LT BL
LIGHT BLUE
WH
WHITE
VT - 18G
BK/WH - 18G
BK - 18G
YL/WH - 18G
WH/VT - 18G
OR/LT BL - 18G
VT - 18G
WH - 18G
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
22
23
24
1
2
3
4
1
2
3
4
1
2
3
1
2
3
BL/WH - 18G
GN - 9 COND.
TO: C317
PASSENGER
SLIDING DOOR
10
WH/LT GN - 18G
LT BL/BL - 18G
1
2
TO: OEM
SIDE IMPACT
SENSOR
RED
TO: J3 OF
E50737A
BK/WH - 18G
WH/RD/OR - 14G
OR/BK - 14G
A
B
A
B
MOTOR
MOTOR
RAMP
MOTOR
M
1
2
3
4
5
6
BL/WH - 18G
BL/WH - 18G
LT GN/GN - 18G
VT - 18G
WH - 18G
VT - 18G
OR/LT BL - 18G
LT GN/GN - 18G
BK/WH - 18G
BL/WH - 18G
BK/RD - 14G
WH/LT GN - 18G
BK/VT - 20G
VT - 20G
BK/WH - 18G
BK - 20G
BK/GY - 20G
OR - 20G
WH - 16G
NO
MAGNETIC
ENTRY
SWITCH
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
BK/GY - 20G
BK/VT - 20G
BK/WH - 18G
WH - 9 COND.
VT - 9 COND.
GN - 9 COND.
BK - 9 COND.
YL - 9 COND.
OR - 9 COND.
COM
10
BK/BL - 20G
BK/TN - 20G
BK/LT GN - 20G
BK - 14G
BL/WH - 18G
WH Switch
Bk - 16G
BK Switch
WH - 20G
GROUND
1
2
3
4
5
6
7
8
9
COLOR
OR - 20G
VT - 20G
WH - 18G
NC
BK - 14G
BK/TN - 20G
BK/LT GN - 20G
BK/BL - 20G
LT BL/BL - 18G
BK/RD - 14G
BK/GY - 20G
BK/VT - 20G
1
2
3
4
5
6
7
8
9
COLOR CODE
ABR.
OR - 20G
WH - 20G
1
2
3
1
2
3
BK - 14G
BK/TN - 20G
BK/LT GN - 20G
BK/BL - 20G
LT BL/BL - 18G
BK/RD - 14G
BK/GY - 20G
BK/VT - 20G
NO
VT - 20G
WH - 20G
VT - 20G
WH - 20G
1
2
3
1
2
3
COM
BK - 14G
BK/TN - 20G
BK/LT GN - 20G
BK/BL - 20G
LT BL/BL - 18G
BK/RD - 14G
BK - 20G
BK/VT - 20G
1
2
3
4
5
6
DASH
DOOR
SWITCH
1
2
3
4
5
6
7
8
9
WH/BK - 20G
BK - 14G
WH/RD/OR - 12G
OR/BK - 12G
BK - 20G
WH - 20G
WH/BK - 14G
VT - 9 COND.
BK - 9 COND.
BK - 20G
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
1
2
3
BK - 20G
WH - 20G
WH/BK - 14G
COM
NO
SWITCH
SWITCH
SWITCH
COM
NO
RAMP
DEPLOY
SWITCH
RAMP
STOW
SWITCH
YL - 9 COND.
WH - 9 COND.
OR - 9 COND.
VT - 20G
WH - 20G
WH - 20G
VT - 20G
WH - 20G
WH - 20G
VT - 20G
VT - 20G
RD - 10G
RD - 10G
BK - 10G
BK - 10G
C-PILLAR
DOOR
SWITCH
TO FUSE BLOCK
(BATTERY)
DRAWING NOTES
Junctions only occur at intersections with junctions symbol.
All other intersections are wire crossings with out junctions!
DESCRIPTION
SYMBOL
DESCRIPTION
CONNECTOR
MOTOR
JUNCTION
NO SWITCH
CHASSIS GROUND
MOMENTARY SWITCH
Page 19B
RD - 12G
OR/BK - 12G
WH/OR/RD - 12G
BK - 12G
RD - 10G
OR/BK - 12G
WH/OR/RD - 12G
BK - 10G
GROUND
SYMBOL
M
COM
NO
WH - 12G
BL/BK - 12G
BL/BK - 12G
WH - 12G
BL/BK - 12G
WH - 12G
1
2
1
2
MOTOR
MOTOR
MOTOR
MOTOR
M
KNEEL
MOTOR
Page 20B
Electrical Schematic - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Power Door, Foldout Ramp & Kneel System (without Curtain Air Bags)
*Note: Diagram includes some late 2005 conversions.
DASH
DOOR
SWITCH
DASH
DOOR
SWITCH
KNEEL
ON/OFF
SWITCH
1
2
3
4
5
6
7
8
TO: C309
BODY SIDE
BK - 14G
BK/TN - 20G
BK/LT GN - 20G
BK/BL - 20G
BK - 20G
BK/VT - 20G
BK - 14G
BK/TN - 20G
BK/LT GN - 20G
BK/BL - 20G
BK/GY - 20G
BK/VT - 20G
BK/RD - 14G
BK/RD - 14G
1
2
3
4
5
6
7
8
BK - 14G
BK/TN - 20G
BK/LT GN - 20G
BK/BL - 20G
BK/GY - 20G
BK/VT - 20G
1
2
3
4
5
6
7
8
BK/BL - 20G
BK/TN - 20G
BK/LT GN - 20G
BK - 14G
1
2
3
4
5
6
7
8
9
BK/GY - 20G
BK/VT - 20G
BK/RD - 14G
BK/RD - 14G
OR - 20G
WH - 20G
BK - 18G
YL/WH - 18G
1
2
3
4
5
6
1
2
3
4
5
6
OR/BK - 12G
WH/OR/RD - 12G
RD - 12G
BK - 12G
BL/BK - 12G
WH - 12G
LT GN
LIGHT GREEN
BLACK
OR
ORANGE
BR
BROWN
PK
PINK
DK BL
DARK BLUE
RD
GN
GREEN
TN
TAN
GY
GRAY
VT
VIOLET
LT BL
LIGHT BLUE
WH
WHITE
BK/VT - 20G
VT - 20G
BK/WH - 18G
BK - 20G
BK/GY - 20G
OR - 20G
WH - 16G
VT - 18G
WH - 18G
VT - 18G
OR/LT BL - 18G
LT GN/GN - 18G
BK/WH - 18G
BL/WH - 18G
VT - 18G
BK/WH - 18G
BK - 18G
YL/WH - 18G
WH/VT - 18G
OR/LT BL - 18G
VT - 18G
WH - 18G
TO: J3 OF
E50737A
BK/WH - 18G
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
22
23
24
1
2
3
4
1
2
3
4
1
2
3
1
2
3
BL/WH - 18G
GN - 9 COND.
WH/RD/OR - 14G
OR/BK - 14G
A
B
A
B
MOTOR
MOTOR
RAMP
MOTOR
M
1
2
3
4
5
6
BL/WH - 18G
WH - 9 COND.
VT - 9 COND.
GN - 9 COND.
BK - 9 COND.
YL - 9 COND.
OR - 9 COND.
NO
BL/WH - 18G
LT GN/GN - 18G
RED
BK/WH - 18G
WH Switch
Bk - 16G
BK Switch
E50678-REV C
CONTROLLER
WH/VT - 18G
10
11
12
COLOR
BLUE
BL/WH - 18G
MAGNETIC
ENTRY
SWITCH
10
11
12
ABR.
BL
1
2
3
4
5
6
1
2
3
1
2
3
WH - 20G
WH - 20G
COM
1
2
3
4
5
6
7
8
9
COLOR
OR - 20G
VT - 20G
GROUND
1
2
3
4
5
6
7
8
9
ABR.
BK
WH - 18G
NC
10
COLOR CODE
NO
VT - 20G
1
2
3
VT - 20G
WH - 20G
1
2
3
COM
TO: C317
PASSENGER
SLIDING DOOR
WH/BK - 20G
BK - 14G
WH/RD/OR - 12G
OR/BK - 12G
BK - 20G
WH - 20G
WH/BK - 14G
VT - 9 COND.
BK - 9 COND.
BK - 20G
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
1
2
3
BK - 20G
WH - 20G
WH/BK - 14G
COM
NO
SWITCH
SWITCH
SWITCH
COM
NO
RAMP
DEPLOY
SWITCH
RAMP
STOW
SWITCH
YL - 9 COND.
WH - 9 COND.
OR - 9 COND.
VT - 20G
WH - 20G
WH - 20G
VT - 20G
WH - 20G
WH - 20G
VT - 20G
VT - 20G
RD - 10G
RD - 10G
BK - 10G
BK - 10G
C-PILLAR
DOOR
SWITCH
TO FUSE BLOCK
(BATTERY)
DRAWING NOTES
Junctions only occur at intersections with junctions symbol.
All other intersections are wire crossings with out junctions!
DESCRIPTION
SYMBOL
DESCRIPTION
CONNECTOR
MOTOR
JUNCTION
NO SWITCH
CHASSIS GROUND
MOMENTARY SWITCH
Page 21A
RD - 12G
OR/BK - 12G
WH/OR/RD - 12G
BK - 12G
RD - 10G
OR/BK - 12G
WH/OR/RD - 12G
BK - 10G
GROUND
SYMBOL
M
COM
NO
WH - 12G
BL/BK - 12G
BL/BK - 12G
WH - 12G
BL/BK - 12G
WH - 12G
1
2
1
2
MOTOR
MOTOR
MOTOR
MOTOR
M
KNEEL
MOTOR
Page 22A
20 Ele U
0 ct n
it (F 6 & rica fol
ho o
l d
ut ld 20 Sc fo
r
0
o
Cu u 7 he :
rt t R Ch ma
ai am r ti
y c
n
A p) sle
r
ir
ba
gs
*Note: Diagram includes some late 2005 conversions.
DRAWING NOTES
Junctions only occur at intersections with junctions symbol (
All other intersections are wire crossings without junctions!
DRAWING NOTES
Junctions only occur at intersections with junctions symbol (
All other intersections are wire crossings without junctions!
BLUE
LT GN
LIGHT GREEN
BK
BLACK
OR
ORANGE
BR
BROWN
PK
PINK
DK BL
DARK BLUE
RD
RED
BL
C306 (SEAT SIDE)
GN
WH/PK - 18G
PK/OR - 18G
LT GN/BN - 18G
GREEN
TN
TAN
GY
GRAY
VT
VIOLET
LT BL
LIGHT BLUE
WH
WHITE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
4
5
6
7
8
9
10
11
12
13
BK/OR - 14G
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
OR/RD - 14G
LT BL/TN - 18G
WH/VT - 18G
BK/LT GN - 18G
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
LT GN/DK BL - 14G
LT GN/WH - 18G
WH/PK - 18G
OR/RD - 14G
BL/YL - 18G
BL/GN - 18G
BK - 18G
BK - 18G
LT BL/GY - 18G
LT BL/TN - 18G
BK - 18G
BK - 18G
WH/OR - 18G
WH/VT - 18G
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
LT BL/TN - 14G
WH/VT - 18G
BK/LT GN - 18G
LT BL/TN - 14G
WH/VT - 18G
BK/LT GN - 18G
BK/LT GN - 18G
LT GN/LT BL - 18G
BK/OR - 14G
LT GN/WH - 18G
WH/PK - 18G
OR/RD - 14G
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
BK/WH - 18G
WH/PK - 18G
LT BL/GY - 18G
BK/WH - 18G
WH/PK - 18G
LT BL/GY - 18G
BK - 18G
BK - 18G
BL/YL - 18G
BL/GN - 18G
BK/RD - 18G
BK/WH - 18G
LT BL/GY - 18G
LT BL/TN - 18G
BK/WH - 18G
BK/RD - 18G
LT BL/YL - 18G
LT BL/TN - 18G
BL/GN - 18G
LT BL/YL - 18G
LT BL/TN - 18G
BL/GN - 18G
BK/OR - 14G
LT GN/DK BL - 14G
TN/BU - 18G
TN - 18G
OR/GN - 18G
OR/LT BL - 18G
TN/VT - 18G
TN/YL - 18G
TN/BU - 18G
WH/VT - 18G
TN - 18G
OR/GN - 18G
OR/LT BL - 18G
TN/VT - 18G
TN/YL - 18G
TN - 18G
OR/GN - 18G
OR/LT BL - 18G
TN/VT - 18G
TN/YL - 18G
WH/VT - 18G
WH/VT - 18G
LT GN/TN - 14G
LT GN/TN - 14G
VT/TN - 18G
TN/LT GN - 18G
TN/GN - 18G
VT/BN - 18G
VT/WH - 18G
VT/TN - 18G
TN/LT GN - 18G
TN/GN - 18G
VT/BN - 18G
VT/WH - 18G
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
LT GN/TN - 14G
LTGN/DK BL - 14G
TN/DK BL - 18G
TN - 18G
OR/GN - 18G
OR/LT BL - 18G
TN/VT - 18G
TN/YL - 18G
WH/VT - 18G
LT GN/TN - 18G
VT/TN - 18G
TN/LT GN - 18G
TN/DK GN - 18G
VT/BN - 18G
VT/WH - 18G
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
LT GN/YL - 18G
LT GN/GN - 18G
LT GN/WH - 18G
LT GN/OR - 18G
WH/PK - 18G
OR/RD - 14G
BK - 18G
BK - 18G
1
2
3
4
1
2
3
4
LT GN/YL - 18G
LT GN/GN - 18G
LT GN/OR - 18G
LT GN/WH - 18G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
LTGN/DK BL - 14G
TN/BL - 18G
TN - 18G
OR/GN - 18G
OR/LT BL - 18G
TN/VT - 18G
TN/YL - 18G
WH/VT - 18G
LT GN/TN - 18G
VT/TN - 18G
TN/LT GN - 18G
TN/GN - 18G
VT/BN - 18G
TN/GN - 18G
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
LT GN/YL - 18G
LT GN/GN - 18G
LTGN/DK BL - 14G
TN/BL - 18G
TN - 18G
OR/GN - 18G
OR/LT BL - 18G
TN/VT - 18G
TN/YL - 18G
WH/VT - 18G
LT GN/TN - 18G
VT/TN - 18G
TN/LT GN - 18G
TN/GN - 18G
VT/BN - 18G
TN/GN - 18G
VT/TN - 18G
TN/LT GN - 18G
TN/GN - 18G
VT/BN - 18G
VT/WH - 18G
LT BK - 18G
WH/PK - 18G
LT GN/GY - 18G
LT BK - 18G
WH/PK - 18G
LT GN/GY - 18G
BK/OR - 18G
BK/OR - 18G
LT GN/YL - 18G
LT GN/TN - 18G
LT GN/GN - 18G
LT GN/YL - 18G
LT GN/TN - 18G
LT GN/GN - 18G
LT GN/YL - 18G
LT GN/GN - 18G
BK - 18G
BK/OR - 18G
BK/OR - 12G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
BG (502)
LT GN/DK BL - 14G
TN/BU - 18G
C304 (SEAT SIDE)
Page 21B
BK/OR - 14G
PK/OR - 18G
LT GN/BN - 18G
1
2
3
4
1
2
3
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
C304 (BODY SIDE
BK/OR - 12G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
4
5
6
7
8
9
10
11
12
13
C305 (BODY SIDE)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
BK/LT GN - 18G
LT GN/LT BL - 18G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
SIR MODULE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
BK/OR - 14G
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
OR/RD - 14G
LT BL/TN - 18G
WH/VT - 18G
BK/LT GN - 18G
WH/OR - 18G
WH/VT - 18G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
HARNESS E50540A OR E50541A (P3)
BATTER FUSE BLOCK (FB2 - F4)
IGNITION FUSE BLOCK
100016-001 MEMORY BOARD
C322 (SEAT SIDE)
COLOR
OR/RD - 14G
SIR MODULE
ABR.
BK/WH - 18G
C306 (BODY SIDE)
COLOR
).
).
COLOR CODE
ABR.
C305 (SEAT SIDE)
w
Electrical Schematic - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Front Passenger Seat Electrical Systems (Memory)
Page 22B
Electrical Schematic - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Front Passenger Seat Electrical Systems (Non-Memory)
*Note: Diagram includes some late 2005 conversions.
DRAWING NOTES
Junctions only occur at intersections with junctions symbol (
All other intersections are wire crossings without junctions!
OR/RD - 14G
).
WH/PK - 18G
COLOR
ABR.
COLOR
BL
BLUE
LT GN
LIGHT GREEN
BK
BLACK
OR
ORANGE
BR
BROWN
PK
PINK
DK BL
DARK BLUE
RD
RED
GN
GREEN
TN
TAN
GY
GRAY
VT
VIOLET
LT BL
LIGHT BLUE
WH
WHITE
WH/OR - 18G
WH/VT - 18G
BK/LT GN - 18G
LT GN/LT BL - 18G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
WH/PK - 18G
OR/RD - 14G
LT GN/WH - 18G
WH/PK - 18G
OR/RD - 14G
BL/YL - 18G
BL/GN - 18G
BK - 18G
BK - 18G
LT BL/GY - 18G
LT BL/TN - 18G
BK - 18G
BK - 18G
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
LT GN/YL - 18G
LT GN/GN - 18G
LT GN/WH - 18G
LT GN/OR - 18G
1
2
3
4
1
2
3
4
LT GN/YL - 18G
LT GN/GN - 18G
LT GN/OR - 18G
LT GN/WH - 18G
BK - 18G
BK - 18G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
WH/OR - 18G
WH/VT - 18G
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
LT BL/TN - 14G
WH/VT - 18G
BK/LT GN - 18G
LT BL/TN - 14G
WH/VT - 18G
BK/LT GN - 18G
BK/LT GN - 18G
LT GN/LT BL - 18G
BK/OR - 14G
LT GN/WH - 18G
WH/PK - 18G
OR/RD - 14G
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
LT GN/LT BL - 18G
WH/PK - 18G
LT BL/GY - 18G
BK/WH - 18G
WH/PK - 18G
LT BL/GY - 18G
BK/WH - 18G
WH/PK - 18G
LT BL/GY - 18G
BK - 18G
BK - 18G
BL/YL - 18G
BL/GN - 18G
BK/RD - 18G
BK/WH - 18G
LT BL/GY - 18G
LT BL/TN - 18G
BK/WH - 18G
BK/RD - 18G
LT BL/YL - 18G
LT BL/TN - 18G
BL/GN - 18G
LT BL/YL - 18G
LT BL/TN - 18G
BL/GN - 18G
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
BG (502)
BK/OR - 14G
BG (501)
IGNITION FUSE BLOCK
BK - 18G
WH/PK - 18G
LT GN/GY - 18G
BK - 18G
WH/PK - 18G
LT GN/GY - 18G
BK/OR - 18G
BK/OR - 18G
LT GN/YL - 18G
LT GN/TN - 18G
LT GN/GN - 18G
LT GN/YL - 18G
LT GN/TN - 18G
LT GN/GN - 18G
LT GN/YL - 18G
LT GN/GN - 18G
BK - 18G
BK/OR - 18G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
BK/OR - 14G
WH/PK - 18G
BK/OR - 14G
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
LT GN/YL - 18G
LT GN/GN - 18G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
1
2
3
4
1
2
3
4
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
C304 (BODY SIDE
LT GN/GY - 18G
LT GN/TN - 18G
PK/GN - 18G
WH/PK - 18G
OR/RD - 14G
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
4
5
6
7
8
9
10
11
12
13
C305 (BODY SIDE)
C304 (SEAT SIDE)
Page 23A
BK/OR - 14G
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
OR/RD - 14G
LT BL/TN - 18G
WH/VT - 18G
BK/LT GN - 18G
BK/OR - 14G
LT GN/WH - 18G
PK/OR - 18G
BL/YL - 18G
BL/GN - 18G
LT GN/BN - 18G
WH/OR - 18G
OR/RD - 14G
LT BL/TN - 18G
WH/VT - 18G
BK/LT GN - 18G
PK/OR - 18G
LT GN/BN - 18G
SIR MODULE
C305 (SEAT SIDE)
C306 (SEAT SIDE)
BK/OR - 14G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
SIR MODULE
COLOR CODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
HARNESS E50540A OR E50541A (P3)
BATTER FUSE BLOCK (FB2 - F4)
IGNITION FUSE BLOCK
C306 (BODY SIDE)
PK/OR - 18G
LT GN/BN - 18G
ABR.
BK/WH - 18G
Page 24A
E
& le
(F 2 ctr
ol 00 ic U
do 7 al nf
ut Ch Sc old
Ra ry he fo
m sle ma r:
p) r ti
N C on c on v 2
-M e r 00
em sio 6
or n
y
Exploded View - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Platform Assembly
*Note: Diagram includes som late 2005 conversions.
5
3
17
2
14
12
7
11
10
11
6
14
4
8
13
1
9
Page 23B
Page 24B
REPLACEMENT PARTS
2006 & 2007* Chrysler Conversion (Foldout Ramp) Platform Assembly
Item
Qty.
1
1
Description
Part Number
RAMP-EXTENSION/29.25" AUTO/2004 CHRYSLER
E50262DK-05
2
1
RAMP-BASE/29.25" AUTO/TOYOTA
3
22
SCREW-#10-32X1/2 FHDHXS-AUTO BLK-W/PATCH
4
2
NUT-#10-32 W/LOCKWASHER/AUTO-BK
E90111DK
17192P
18349
5
1
HINGE WMT.-S.S. 2" X 1/4" X 29"
6
2
WASHER-1/4" FLAT/AUTO-BK
18619W029
10062
7
2
BOLT-1/4-20X3/4"BHCS NYLK/BKZN
25371
8
1
CAM-CAST RAMP
34317
9
2
BUMPER-RUBBER RECES.31/32 OD
10950
10
1
CHAIN-NICKEL PLATED #35 ROLLER X 9.38"
11
2
LINK-CHAIN #35
12
1
BRACKET-CABLE TENSIONER/OUTER/BLACK
13
1
DECAL-WARN CHAIN HAZ RAMP EVII
14
3
#6 NYLON WASHER
15 **
0.001
LOCTITE-BLUE/#242 GEN PURPOSE
16 **
0.58
SHRINK TUBING-1/2"
17
20
NUT-10-32 HEX CENTER LOCK/AUTO-BK
84314R009.38
12454
52568-2907BK
26134
82070-000
18822
14374R
34290BK
** Item not shown
Page 25
REPLACEMENT PARTS
2006 & 2007* Chrysler Conversion (Foldout Ramp) Ramp Assembly Gear, Motor and Base Assembly
Item
Item
Qty.
Qty.
Description
Description
Part Number
Number
Part
1
1
WMT-MAIN RAMP HOUSING
2
1
MOTOR-RAMP ASSY/KLAUBER 12V. 1.2 RPM
3
1
WMT-ARM-DRIVES RAMP-GEAR MTR
4 **
1
SUPPORT-GEAR MOTOR/FOLDING RAMP
5
1
STOW SWITCH SLIDER
6
4
NUT-SHOULDER 3/4" HEX/0.27 H
32385
7
2
WASHER-NYLON 1/4IDX11/16X.030
12690
8
1
BOLT-1/4-20 X 3" ZN FT/AUTO-BK
23976
9
1
NUT-1/4-20 HEX LOCK/AUTO-BK
10775
E90108WDK
51654AK2907
E40268W-07BK
E40479BK
E40481
10
1
COLLAR-SPLIT-3/4" SHAFT/RMP MTR/INNER/BK
11
4
SCREW-1/4-20 X 1" SOC HD CAP
52565-2905BK
24221
12
1
CAM-MICRO-SWITCH ADJUST-EV
52573-2905
13
1
SCREW-10-32 X 3/8 SET
84015-000
14
4
SCREW-5/16-18 X 7/8 BUTTON HD W/PATCH
15
1
PLATE-TAPPED #4-40 MICRO SWITCH
24998
16
1
MICRO SWITCH-FLR LVL/CUPPED
23184
17
2
SCREW-#4-40 X 3/4" RD. HD./AUTO-BK
11483
18
4
BOLT-1/4-20 X 1/2 BUT HD SOC/AUTO-BK
15733
19 **
1
ASSEMBLY-FOLDING RAMP STOW SWITCH
20 **
1
NUT-#4-40 w/LOCKWASHER/AUTO-BK
19537
21
1
PIN-RAMP SUPPORT-96SC 29" RAMP
51815-2905
22
1
LATCH BOLT-SUPPORT-29" RAMP
51541-2905
23
4
WASHER-5/16" LOCK/AUTO-BK
10068
LOCTITE-BLUE/#242 GEN PURPOSE
18822
24 **
0.001
81022
33421A
25
1
BOLT-1/4-20X3/4"BHCS NYLK/BKZN
25371
26
1
RAMP DEPLOY SWITCH ARMATURE GUIDE
34846
27
2
WASHER-1/4" FLAT/AUTO-BK
10062
** Item not shown
Page 26
Exploded View - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Ramp Assembly Gear, Motor and Base Assembly
*Note: Diagram includes some late 2005 conversions.
11
10
26
25
12
18
7
13
3
8
27
17
5
22
9
21
6
17
2
16
14
23
15
Page 27A
1
Page 28A
2 Ex
M 00 plo U
ot 7 d n
or Fo ed fo
an ld V ld f
d ou iew or
B tR 2 :
as a 0
e m 0
A p 6
ss G &
em ea
bl r,
y
Exploded View - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Ramp Assembly
*Note: Diagram includes some late 2005 conversions.
6
12
3
5
2
1
5
3
5
6
12
10
13
11
9
4
Page 27B
Page 28B
REPLACEMENT PARTS
2006 & 2007* Chrysler Conversion (Foldout Ramp) Ramp Assembly
Item
Qty.
1
1
Description
Part Number
RAMP ASSY-BASE & EXT/29.25" AUTO/TOYOTA
E90111DKA2907-1
E50889ADK
2
1
ASSY-GEARMOTOR/ARM_BKT/CHRY 2007 R&S
3
2
BEARING-FLANGE-5/8" X 1/4"-10FDU04
28435
4
2
SCREW-1/4-20 X 3/8" FLBHSCS-
28252
5
3
BOLT-3/8-16 X 3/4" FLBHSCS-GD8
6
2
PIVOT PIN/BUSHING/EV RAMP/2905
7 **
1
HARNESS-RAMP EXT./CONTROLLER-OAKTEC
8 **
0.001
9
1
LOCTITE-BLUE/#242 GEN PURPOSE
RETAINER-BEARING
25171
52571-2905
52038A-96A8
18822
21451-03
10
1
BEARING-1/2ID X 1 1/8 OD-BALL
21371
11
1
WASHER-.519ID X .876OD X .074
12621
12
2
WASHER-.63 X .8 X .06 NYLON{10
83584
13
1
WASHER-UHMW 1.500 OD X .76 ID X 0.062
29680
** Item not shown
Page 29
REPLACEMENT PARTS
2006 & 2007* Chrysler Conversion (Foldout Ramp) Kneel Assembly
Item
Item
Qty.
Qty.
1
1
Description
Description
Part Number
Number
Part
WMT-BKT-KNEEL ACTUATOR
E50614W
E51410-06
2
1
ACT-D12-21B5-07BRN/EV2003 CARAVAN
3
1
BOLT-1/2-13 X 3" HEX
4
1
PIN-CLEVIS 1/2 X 2 1/4"
5
1
SPACER W/BEARING-KNEEL SYSTEM/EV2001
6
1
COTTER-HAIR PIN
10041
10908
E50040A
12531
7
2
PIN-COTTERED-4/4 LEAF CHAIN
21759
8
2
PIN-COTTER 1/32 X1/2 (4X4)
23173
9
1
RELEASE HANDLE ASSY-KNEEL
10
1
EMER. RELEASE ACTUATOR KNEEL SYS.
11 **
1
KNEEL CABLE
** Item not shown
Page 30
E40335A
E50113
EC42042
REPLACEMENT PARTS
Exploded View - 2006 & 2007* Chrysler Conversion (Foldout Ramp) Kneel Assembly
*Note: Diagram includes some late 2005 conversions.
9
6
1
4
8
8
7
7
5
10
2
3
Page 31
DIMENSIONS
Dimensions - 2006 & 2007 Chrysler Conversion (Foldout Ramp)
D
B C
A
J
H
I
G
F
E
All dimensions are for reference only.
Foldout Ramp
Door Opening Usable Width (Slide Door)
A
31-1/4”
Door Opening Usable Height (Slide Door)
B
52-3/4”
Interior Height at Center of Van*
C
57-1/4”
Interior Height at Driver and Passenger Position**
D
56-1/4”
Ramp Length
E
52”
Ramp Width (Useable Clear Opening)
F
29-1/4”
Ramp Angle (with Vehicle Kneeled)
G
9.4˚
Interior Floor Length (Behind Front Seats)
H
53-1/2”
Overall Interior Floor Length (Flat Area)
I
82”
Interior Width at B Pillars
J
60-1/4”
Due to manufacturing tolerances both with the OEM vehicle and the conversion components, all dimensions may vary slightly from those shown.
* Deduct 2-1/2" off of Interior Height for conversions with OEM Overhead DVD/Rail System
** Deduct 2" off of Interior Height for conversions with OEM Moon Roof
Page 32
"Providing Access to the World"
®
Over 300 Braun
Dealers Worldwide
®
"Providing Access to the World"
International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA
1-800-THE LIFT ®
(574) 946-6153
FAX: (574) 946-4670
®
Braun Lowered Floor Conversions
2006 & 2007 Chrysler Minivans
34852
September 2008
International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA
(574) 946-6153
FAX: (574) 946-4670
1-800-THE LIFT ®
braunmobility.com™
Patent #6,825,628 B2
entervan.com™
All illustrations, descriptions and specifications in this manual are based on the latest product information available at the
time of publication. The Braun Corporation reserves the right to make changes at any time without notice.