Download COIL NAILER Model NV 75AG

(b) Reassembly
Disassembly procedures should be followed in the reverse order. Note the following points.
Bend the tip of the Cover [95] and engage it with the convex portion of Magazine (A) [75]. Hold it with
Pushing Lever Cover (A) [71] positioning the Cover [95] outside Pushing Lever Cover (A) [71].
Nylon Nut M5 [69]
Machine Screw (W/Washers)
M5 x 30 (Black) [37]
Body [18]
Nylon Nut M5 [69]
Pin [76]
Sleeve [70]
Pushing Lever Cover (A) [71]
Magazine (A) [75]
Protector (B) [72]
Feeder Shaft Ring [77]
Pin [76]
Magazine
Cover
(A) [78]
Concave portion
Hex. Socket Hd. Bolt
M5 x 20 [86]
Holder Cap (A) [79]
Nail Holder [81]
O-ring (P-9) [62]
Holder Shaft
(A) [83]
Spring [84]
Roll Pin D2.5 x 12 [82]
Fit the hole of the
Cover [95] beween the convex portion of
Magazine (A) [75] and the concave
portion of Pushing Lever Cover (A) [71].
Ratchet Spring [80]
Fig. 19 Disassembly and reassembly of the magazine section
--- 29 ---