Download 42re automatic transmission

42RE AUTOMATIC TRANSMISSION
WJ
21 - 151
DISASSEMBLY AND ASSEMBLY (Continued)
(6) Verify that tab ends of rear bearing locating
ring extend into access hole in gear case (Fig. 300).
(7) Support geartrain on Tool 6227-1 (Fig. 301). Be
sure tool is securely seated in clutch hub.
(8) Install overdrive gear case on geartrain (Fig.
301).
Fig. 300 Correct Rear Bearing Locating Ring
Position
1 – CASE ACCESS HOLE
2 – TAB ENDS OF LOCATING RING
(9) Expand front bearing locating ring with snap
ring pliers (Fig. 302). Then slide case downward until
locating ring locks in bearing groove and release
snap ring.
(10) Install locating ring access cover and gasket
in overdrive unit case (Fig. 303).
Fig. 302 Seating Locating Ring In Rear Bearing
1 – EXPAND BEARING LOCATING RING WITH SNAP RING
PLIERS
2 – ACCESS HOLE
Fig. 303 Locating Ring Access Cover And Gasket
Installation
1 – TORX SCREWDRIVER (T25)
2 – ACCESS COVER SCREWS
Fig. 301 Overdrive Gear Case Installation
1 – GEARTRAIN ASSEMBLY
2 – GEAR CASE