Download MAC 1200 Option Codes

System Setup
9.5
System Setup Parameters
Ordering / Referring Physician / Technician
High HR beep
In the field at left, you see the last name of the
physician or technician selected as the default name.
When selecting "other", a menu displays where you
can enter up to 10 names (3-digit ID number, first
name, last name). The default name (and ID) is
automatically selected at power-up.
An audible signal sounds when the heart rate exceeds a limit value (Yes/[No]) (only in 6 Lead and
Arrhythmia Modes). The limit value (220 - age) can
be changed manually.
The "Referring Physician" is only relevant if you
send ECGs to the MUSE CV Information System.
This name will not be annotated on the ECG recording. Press the
key to exit the menu.
Institution Name
The name entered here will be printed on each report
page.
Cart #
Lead Labels
[AAMI] codes: RA, LA, RL, LL, V1 to V6 or
IEC codes: R, L, F, N, C1 to C6
Pace Enhancement
Pacer pulses are displayed enhanced and with a
given amplitude ([Yes], No).
When programming pacemakers, we recommend to
disable the pace enhancement.
Baseline roll filter
Select the lower cut-off frequency: = 0.04, [0.08],
0.16 Hz.
Enter any number between 1 and 9999 to identify
the cart (local system). The cart # entered here is the
default number that appears in "Patient Data".
Default: [1]
Date
Format: [month/day/year] or day.month.year
Site #
Time format [12] hours (am/pm) or 24 hours
Enter any number between 1 and 255 to identify the
MUSE CV Information System to which the ECGs
will be sent. The site # entered here is the default
number that appears in "Patient Data".
Default: [1]
Location #
Time
Units
Units of measurement for the patient's height and
weight: [in/lb] or cm/kg
Mains
AC line frequency (USA [60 Hz], Europe 50 Hz)
Enter any number between 1 and 600 to identify the
location of the sending system. The location # entered here is the default number that appears in
"Patient Data".
Default: [1]
Date/Time
LCD light off after
If operating controls are not activated within the
selected period of time the display backlighting
automatically switches off (system default [5 min],
adjustment range l to 99 min).
Enter date and time (enter 4 digits for the year).
Default Mode
Lead fail beep
This is the operating mode the unit defaults to after
power-up: [12 Lead], 6 Lead, Arrhythmia
Indicates when electrodes are not properly applied or
disconnected (Yes/[No]).
52
MAC® 1200
227 492 04-F