Download Solidyne D-816

3.4
Microphone channels
Gain
Enable/disable the
phantom power (48V) for
all mic channels.
Input switch (LINE/MIC-3)
4 bands EQ. This stage has a
dynamic range compressor
compresor that begins to work
over 0 VU. The indicator “MIC
compressor” shows its action.
The processed signal can be sent to
PGM and REC. To the left, the
switch cancels the sending.
MIC-3/Line channel can be
send to program bus (PGM
pressed); to recording bus
(REC
pressed),
or
to
processor stage (EQ) with
both buttons released. If
both buttons are pressed,
the signal is only sent to
PGM.
The channels can be assigned
direct to PGM or be send to the
processor stage (EQ)
Previous listening (Cue)
Main fader. To enable the
microphones press the
MASTER MIC button,
located at the right on the
console.
The gain must be adjusted
in order to the main fader
works over -30 dB
indication. OVL indicates
overload, thjat is to say,
excesive input gain.
SOLIDYNE
The apropiate operation
level is mantaining the
peaks at 0 VU
D·816 broadcast console
Page 21