Download USER MANUAL - Frank`s Hospital Workshop

Patient Controls
Patient Controls
The patient controls are located on the inboard side of the intermediate siderails. Operation of this feature is the same
as that for the caregiver control previously described in this manual except head elevation is restricted to 55°.
Head Up/Down Control
The patient can raise or lower the head section by using the Head Up/Down controls.
NOTE:
When in chair mode, as indicated by an illuminated chair position indicator, the patient positioning
controls are disabled.
Knee Up/Down Control
The patient can raise or lower the knee section using the Knee Up/Down controls. Operation of this
feature is the same as that for the caregiver control previously described in this manual.
NOTE:
When in chair mode, as indicated by an illuminated chair position indicator, the patient positioning
controls are disabled.
Bed Pendant
The pendant is used to raise or lower the head or foot sections of the bed.
The pendant controls will not work when the head section is raised above 50°.
28