Download SERVICE MANUAL
Transcript
FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT 98.12.09 3-3. ADJUSTMENT OF BELT TENSION • Adjustment of the Scanner Motor Timing Belt 1. Remove the Original Glass. 2. Remove four screws and the Cover. 1167D014AB 3. Loosen the two screws that secure the Scanner Motor. Using a bar tension gage, pull the motor to the right with a tension of 1000 g ±50 g and, at the same time, tighten the mounting screws. NOTE After the adjustment, turn the timing belt to check that the belt teeth are in mesh with the pulley grooves. 1167D109AB D-30