Download Maintenance Manual

Transcript
D40x40 / Navtec Navigator Maintenance
RELIEVE SYSTEM HYDRAULIC
PRESSURE
Relieve all pressure in the hydraulic system
before disconnecting the hoses or performing
other work on the system.
When loosening fittings in hoses where residual
pressure may exist, slowly loosen the fitting until
oil begins to leak. Wait for leaking to stop before
disconnecting the fitting. Make sure all
connections are tight and hoses are in good
condition before applying pressure to the system.
EN08402.L96
Some residual pressure will probably remain in
the outrigger and rack angle hydraulic circuits
due to pressure lock valve cartridges in the
cylinders.
N-L-OI76-NO92
_
^
Use extreme caution when removing a cartridge.
The cartridge will be released with great force if
residual pressure remains in the cylinder. Do not
stand in front of the cartridge when removing it.
Safety Messages
(01-10)