Download SID Service Manual
Transcript
4 RLT and RL: Wrap the cable around the spool and insert it through the cable fixing port. While firmly pulling the cable, use a torque wrench with a 2 mm bit socket to tighten the cable pinch bolt to 0.9 Nm (8 in-lb). 2 mm RLT and RL Cut the excess cable, leaving 30 mm protruding from the cable fixing port. Install a cable end fitting and tuck the cable end into the slot in the spool. RLT and RL RLT and RL RLT and RL 28 CABLE INSTALLATION