Download OPERATOR`S MANUAL

Transcript
SETIING UP
STE P 3 . FOUR-SWEE P FRON T SECTION
4 16 T ool Equipment
1. Attach the tool bar assemblies to the mounting frame. 2. Bolt the sweeps to the standards, with the
half sweeps on the short standards.
4. Loosen the tool bar extension clamps and
adjust the standards closer to or farther from
the row, as desired. Tighten the clamp
securely after making an adjustment.
3. Attach the standards to the tool bars, with
the long standards in the rear and the short
standards, with the half sweep, next to the
row.
14