Download On-Line Technical Training Course

Service & Parts Education
SCOOTER PROGRAMMING INSTRUCTIONS
HOW TO MAKE ADJUSTMENTS IN THE SETUP MENU (continued)
4. The forth option is REVERSE SPEED (Factory Default 4)
• Press the VARY key to change the current rate.
- Range: 1
- slowest reverse speed
10 - fastest reverse speed
• Press ENTER to confirm the value when finished.
5. The fifth option is REDUCE SPEED (Factory Default 5)
• Press the VARY key to change the current rate.
- Range: 1
- slowest limit of maximum forward speed and maximum reverse speed
10 - fastest limit of maximum forward speed and maximum reverse speed
NOTE: For example , if REDUCE SPEED is set to 7, FORWARD SPEED to 10 and REVERSE
SPEED to 6, maximum forward speed will reduce to 7, but maximum REVERSE SPEED will stay
at 6, as it is already lower than REDUCE SPEED.
• Press ENTER to confirm the value when finished.
6. The sixth option is BUZZER VOLUME (Factory Default 10)
• Press the VARY key to change the current rate.
- Range: 1
- a setting of 1 turns the horn/buzzer OFF
10 - any other value turns the horn/buzzer ON, 10 being the highest volume
• Press ENTER to confirm the value when finished.
7. The seventh option is SLEEP TIME (Factory Default 30 minutes)
• Press the VARY key to change the rate.
- Range: 5 min. - fastest sleep time setting for scooter (scooter powers down after 5 min. of inactivity)
60 min. - slowest sleep time setting for scooter (scooter powers down after 60 min. of inactivity)
• Press ENTER to confirm the value when finished.
8. The eighth option is PARK BRAKE DELAY (Factory Default 10)
• Press the VARY key to change the current rate.
- Range: 1
- fastest parking brake time engages after stop.
30 - slowest parking brake time engages after stop.
• Press ENTER to confirm the value when finished.
HOW TO MAKE ADJUSTMENTS IN THE OPTIONS MENU
1. The first option is POT REVERSE (Factory Default OFF)
• The Option Menu settings are either ON or OFF.
- Range: ON - Polarity of the throttle Pot is reversed. (Left Hand Drive)
OFF - Normal Polarity of the throttle Pot. (Right Hand Drive)
• Press ENTER to confirm the value when finished.
2. The second option is ENABLE SLEEP (Factory Default ON)
• The Option Menu settings are either ON or OFF.
- Range: ON - Sleep Time is enabled.
OFF - Sleep Time is disabled.
• Press ENTER to confirm the value when finished.
3. The third option is SLEEP BEEP (Factory Default ON)
• The Option Menu settings are either ON or OFF.
- Range: ON - Sleep Beep is enabled.
OFF - Sleep Beep is disabled.
• Press ENTER to confirm the value when finished.
4. The fourth option is SOUND FAULT (Factory Default OFF)
• The Option Menu settings are either ON or OFF.
- Range: ON - Sound Fault is enabled.
OFF - Sound Fault is disabled.
• Press ENTER to confirm the value when finished.
NOTE: ENABLING SOUND FAULT HELPS IN DIAGNOSIS OF THE SCOOTER, ALLOWING SERIES OF BEEPS TO
ASSIST IN TROUBLE SHOOTING.
Power Mobility Guide
Rev. 2/08 page # 9
5-8