Download (CC9XM2) SERVICE MANUAL - Beamer
Transcript
YK No.0567E ED-X10/ED-X12 (CC9XM2) SERVICE MANUAL Warning The technical information and parts shown in this manual are not to be used for: the development, design, production, storage or use of nuclear, chemical, biological or missile weapons or other weapons of mass destruction; or military purposes; or purposes that endanger global safety and peace. Moreover, do not sell, give, or export these items, or grant permission for use to parties with such objectives. Forward all inquiries to Hitachi Ltd. Caution Be sure to read this manual before servicing. To assure safety from fire, electric shock, injury, harmful radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector. Be sure to read cautionary items described in the manual to maintain safety before servicing. Service Warning 1. When replace the lamp, to avoid burns to your fingers. The lamp becomes too hot. 2. Never touch the lamp bulb with a finger or anything else. Never drop it or give it a shock. They may cause bursting of the bulb. 3. This projector is provided with a high voltage circuit for the lamp. Do not touch the electric parts of power unit (circuit) and power unit (ballast), after turn on the projector. 4. Do not touch the exhaust fan, during operation. 5. The LCD module assembly is likely to be damaged. If replacing to the LCD LENS/PRISM assembly, do not hold the FPC of the LCD module assembly. 6. Use the cables which are included with the projector or specified. Contents 1. 2. 3. 4. 5. 6. 7. Features ------------------------------------------------------ 2 Specifications ----------------------------------------------- 2 Names of each part---------------------------------------- 3 Adjustment --------------------------------------------------- 6 Troubleshooting ------------------------------------------ 12 Service points --------------------------------------------- 17 Wiring diagram-------------------------------------------- 31 8. Disassembly diagram ----------------------------------9. Replacement parts list ---------------------------------10.RS-232C communication ------------------------------11. Block diagram --------------------------------------------12. Connector connection diagram ----------------------13.Basic circuit diagram ------------------------------------ 40 47 49 59 60 61 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT. Multimedia LCD Projector April 2006 ED-X10/ED-X12(CC9XM2) 1. Features • High Brightness • Low Noise • Rich Connectivity • Compact Body 2. Specifications Drive system Liquid crystal Panel size panel Number of pixels 1024 (H) x 768 (V) Lamp 200W UHB RGB IN RGB signal VIDEO signal 1.6cm(0.63 type) 1 2 Video : Analog 0.7Vp-p(75Ω termination) H/V. sync. : TTL level (positive/negative) Composite sync. : TTL level RGB OUT Video:Analog 0.7Vp-p, 75Ω output impedance (positive) H/V. sync.: TTL level (positive/negative) Composite sync.: TTL level VIDEO IN 1.0Vp-p (75Ω termination) S-VIDEO IN Y signal: 1.0±0.1Vp-p, (75Ω termination) C signal: 0.286±0.1Vp-p (NTSC burst signal, 75Ω termination) 0.3±0.1Vp-p (PAL/SECAM burst signal, 75Ω termination) Y 1.0±0.1Vp-p, 75Ω termination (positive) COMPONENT CB/PB 0.7±0.1Vp-p, 75Ω termination (positive) VIDEO CR/PR 0.7±0.1Vp-p, 75Ω termination (positive) AUDIO IN 1 AUDIO signal TFT active matrix AUDIO IN 2 AUDIO IN 3 L/R AUDIO OUT 200mVrms, 47kΩ or more (max. 3.0Vp-p) 200mVrms, 47kΩ or more (max. 3.0Vp-p) 0~200mVrms, output impedance 1kΩ (max. 5.0Vp-p) Speaker output 1W x 1 Power supply AC100~120V/3.3A, AC220~240V/1.4A Power consumption 310W Dimensions 306 (W) x 86 (H) x 249 (D) mm (Not including protruding parts) Weight 3.0kg Temperature range Operation : 5~35°C Storage : -20~60°C Accessories Remote control x1 RGB cable x 1 Audio/Video cable x 1 Power cords x 3 2 Batteries x 2 User’s manuals x 1 ED-X10/ED-X12(CC9XM2) 3. Names of each part ● Projector Control buttons Lamp cover (Lamp unit is inside.) Remote sensor Speaker Zoom ring Security bar (Use for attaching a commercial anti-theft chain or wire.) Focus ring Vent Elevator button Lens Front-Right side Elevator foot Lens cover Filter cover (Air filter and intake vent are inside.) Bottom side WARNING During use or immediately after use, do not touch around the lamp and vents of the projector. ( ) It could cause a burn. 3 ED-X10/ED-X12(CC9XM2) Power switch AC inlet Elevator button Ports (See below.) Elevator foot Rear-Left side AUDIO IN3 L/R port (In the default setting, the AUDIO IN3 L/R port is the audio port for the VIDEO, S-VIDEO and COMPONENT VIDEO ports, however it is possible to change the settings.) COMPONENT VIDEO ports Y CB/PB CR/PR Y AUDIO IN1 port (In the default setting, the AUDIO IN1 port is the audio port for the RGB IN1 port, however, it is possible to change the settings.) RGB IN1 port Restart switch (*) RGB IN2 port RGB OUT port AUDIO IN3 R AUDIO OUT port RGB IN1 CB/PB L RGB IN2 RGB OUT AUDIO OUT AUDIO IN1 AUDIO IN2 CR/PR VIDEO port Vent VIDEO CONTROL K USB Ports S-VIDEO S-VIDEO port AUDIO IN2 port (In the default setting, the AUDIO IN2 port is the audio port for the RGB IN2 port, however, it is possible to change the settings.) USB port CONTROL port Kensington lock slot NOTE (*) About Restart switch: This projector is controlled by an internal microprocessor. Under certain exceptional circumstances, the projector may not operate correctly and the microprocessor will need to be reset. In such a case, please push the Restart switch by using a cocktail stick or similar, and before turning on again, make the projector cool down at least 10 minutes without operating. Only push the Restart switch in these exceptional instances. 4 ED-X10/ED-X12(CC9XM2) Control buttons LAMP indicator TEMP indicator Cursor buttons ▲,▼,◄,► POWER indicator STANDBY/ON button INPUT button Remote control SEARCH button STANDBY/ON button RGB button VIDEO VIDEO button ASPECT button HOME button MAGNIFY ON button OFF button RGB AUTO BLANK HOME PAGE UP VOLUME END PAGE DOWN MUTE ASPECT MAGNIFY ON AUTO button SEARCH PAGE UP button VOLUME button OFF FREEZE MY BUTTON 1 2 KEYSTONE END button FREEZE button MUTE button PAGE DOWN button KEYSTONE button MENU POSITION POSITION button ESC button BLANK button MENU button ENTER RESET ESC MY BUTTON button Cursor buttons ▲,▼,◄,► ENTER button RESET button Battery cover (on the back) 5 ED-X10/ED-X12(CC9XM2) 4. Adjustment 4-1 Before adjusting 4-1-1 Selection of adjustment When any parts in the table 4-1 are changed, choose the proper adjusting items with the chart. Table 4-1: Relation between the replaced part and adjustment Replaced part Adjustment Flicker (Chap.4-2) Ghost (Chap.4-3) DC OFF (Chap.4-4) E-POS (Chap.4-5) White balance (Chap.4-6) Color uniformity (Chap.4-7) Dichroic optics unit LCD/LENS prism assembly PWB assembly Main Lamp unit assembly : means need for adjustment. : means not need for adjustment. : means recommended. 4-1-2 Setting of condition before adjustments 1. Before starting adjustments, warm up projector for about 10 minutes. 2. Set Zoom Wide to Max. And project an image with more than 1m (40 inches) in diagonal size. 3. Normalizing the video adjustments Press the [MENU] button to display the EASY menu. If Advanced menu comes up, move to the Easy menu. Select the RESET in the EASY menu and press the [ ] or [ENTER] button to open the RESET dialog. Choose the EXECUTE with the [ ] button. projector to display the Easy menu. (If the Advanced menu appears, move to the Easy menu.) b. Select the RESET in the Easy menu, and then press the [ ] or [ENTER] button. c. Next, press the [ ] button one time. And repress and hold the [ ] button together with the [INPUT] button for 3 seconds or more (the FACTORY MENU will appear). Note that the projector will not allow you to reset its adjustment values with no signal input. 4. Perform all adjustments from the FACTORY MENU. Operate as follows to display the FACTORY MENU. When you use the remote control... a. Press the [MENU] button of the remote control to display the Easy menu. (If the Advanced menu appears, move to the Easy menu.) b. Select the RESET in the Easy menu, and then press the [ ] or [ENTER] button. c. Next, press the [RESET] button one time. And hold the [RESET] button for 3 seconds or longer (the FACTORY MENU will appear). When you use the keypad of the projector... a. Press the [ ], [ ], [ ] or [ ] button of the 6 ED-X10/ED-X12(CC9XM2) 4-2 Flicker adjustment (V.COM adjustment) Adjustment procedure 1. Use DAC-P - V.COM - R: in the FACTORY MENU to adjust so that the flicker at the center of the screen is less than the flicker at the periphery. (When the flicker is about the same across the whole screen, adjust so that the flicker at the center of the screen is somewhat less than elsewhere.) 2. In the same way, use DAC-P - V.COM-G: in the FACTORY MENU to adjust the G color flicker. 3. In the same way, use DAC-P - V.COM-B: in the FACTORY MENU to adjust the B color flicker. NOTE: The test pattern shown on the left sometimes has a horisontal line accross the screen. Test pattern for the adjustment 128/255 4-3 Ghost adjustment Adjustment procedure 1. Make this adjustment after completing the adjustment in the section 4-2. 2. Use DAC-P - GHOST - R: in the FACTORY MENU to adjust so that R color ghost is at a minimum. (Set the adjustment value to default, and then raise the value. When a ghost appears to the left of a vertical line, reduce the value by 6 steps.) 3. In the same way, use DAC-P - GHOST-G: in the FACTORY MENU to adjust so that G color ghost is at a minimum. 4. In the same way, use DAC-P - GHOST-B: in the FACTORY MENU to adjust so that B color ghost is at a minimum. Test pattern for the adjustment 30% 112/255 0/255 30% 4-4 DC OFF adjustment (vertical bars adjustment 1) Adjustment procedure 1. Make this adjustment after completing the adjustment in the section 4-3. 2. Open FACTORY MENU. Select STRIPE > DCOFF > R and use it so that vertical bars are minimized. 3. In the same way, select STRIPE > DCOFF > G and use it so that vertical bars are minimized. 4. In the same way, select STRIPE > DCOFF > B and use it so that vertical bars are minimized. Test pattern for the adjustment 64 /255 88 /255 112 /255 136 /255 160 /255 Press ENTER key 160 /255 136 /255 112 /255 88 /255 64 /255 7 ED-X10/ED-X12(CC9XM2) 4-5 E-POS adjustment (vertical bars adjustment 2) Test pattern for the adjustment Adjustment procedure 1. Make this adjustment after completing the adjustment in the section 4-4. 2. Open FACTORY MENU. Select DAC-P > E-POS > R and use it so that vertical bars are minimized. 3. In the same way, select DAC-P > E-POS > G and use it so that vertical bars are minimized. 4. In the same way, select DAC-P > E-POS > B and use it so that vertical bars are minimized. 112/255 4-6 White balance adjustment (visual inspection) Preparations 1. Perform these adjustments after the adjustments described in Section 4-5. 2. Reset gamma correction before adjustment. Place the cursor on [GAMMA] in the FACTORY MENU, press the [RESET] key and select RESET. Adjustment procedure 1. First, adjust the G color. 2. Select GAMMA, SUB-CNT, and G: in the FACTORY MENU. If the background is white solid, press the [ENTER] key on the Remote control transmitter to change to [G] monochrome in the 33-tone grayscale. 3. Adjust GAMMA, SUB-CNT, and G: in the FACTORY MENU so that brightness of 33 steps is best. 4. Don’t adjust GAMMA, SUB-BRT, and G: in the FACTORY MENU because we want to keep the best contrast ratio. 5. Then adjust colors R and B. 6. Select GAMMA, SUB-CNT, and G: in the FACTORY MENU. If the background is white solid, press the [ENTER] key on the remote control to change to [W] monochrome in the 33-tone grayscale. 7. Adjust GAMMA, SUB-BRT, R: and B: in the FACTORY MENU so that low-brightness white balance is best. 8. Adjust GAMMA, SUB-CNT, R: and B: in the FACTORY MENU so that middle-brightness white balance is best. 9. Repeat steps 7 to 8 above, and adjust so that brightness white balance of 33 steps is best. 8 ED-X10/ED-X12(CC9XM2) 4-7 Color uniformity adjustments Preparations 1. Perform these adjustments after the adjustments described in the section 4-6. 5. Adjustment point No.1 should not be adjusted, because it controls the brightness of the entire screen. 6. To temporarily turn correction off, place the cursor on [C.UNIF.] in the Adjust Tone menu and press the [ ] key. The ON/OFF menu appears. Place the cursor on [ON] with the [ ] key and press the [ ] key. To turn it on again, place the cursor on [OFF] and press the [ ] key. 7. Although this adjustment can also be made using internal signals, we will here use the [ENTER] key on the remote control to select the following two signals. Solid monochrome adjustment color (use G color adjustment when a color differential meter is used). Solid white (use for adjustment other than above). 8. Reset color-shading correction before adjustment. When resetting all values of 8 tones and all colors, place the cursor on [C.UNIF.] in the FACTORY MENU, press the [RESET] key and select RESET in the dialog. When resetting only 1 tone, place the cursor on the tone such as MID-1 to be reset, press the [RESET] key and select RESET in the dialog. Single tone and monochrome resets cannot be performed. 2. Make a color uniformity adjustments for the following tones. MIN tone (approx. 7% input signal) MID-1 tone (approx. 14% input signal) MID-2 tone (approx. 21% input signal) MID-3 tone (approx. 29% input signal) MID-4 tone (approx. 36% input signal) MID-5 tone (approx. 50% input signal) MID-6 tone (approx. 61% input signal) MAX tone (approx. 75% input signal) NOTE: The brightness level of the test patterns in MID-4 and MID-6 is selectable. 3. Select the [C.UNIF.] in the FACTORY MENU and press the [ ] key. This operation displays the Adjust Tone menu (shown below) on the bottom of the screen. To choose the tone to be adjusted, press the [ ] key and then use the [ ] or [ ] key. Select the major adjustment lattice point No. and color, and then adjust them. 4. The major adjustment lattice point numbers (a total of 17 points) corresponds to the major adjustment lattice point positions in the diagram on the right. The color uniformity of the entire screen can be adjusted by adjusting the white balance for each of the points starting in order from the low numbers. FACTORY MENU VID-AD C. UNIF. DAC-P GAMMA STRIPE OPTION Major adjustment lattice point position 14 6 H/6 Adjust tone menu C.UNIF MIN No. 1 R 0 G 0 B 10 0 H/3 MID-2 ... 6 16 12 4 V/3 2 MID-1 8 H/3 H/6 1 3 5 9 11 V/3 Major adjustment lattice point No. 7 MAX ON/OFF V/6 15 ON OFF 9 V/6 13 17 ED-X10/ED-X12(CC9XM2) Adjustment procedure 1 (When a color differential meter is used) 1. First adjust the [MID-1] tone [G:]. 2. Select adjustment point [No.2][G:]. When the background is not [G] monochrome, press the [ENTER] key on the remote control to switch to solid [G] monochrome. 3. Measure the illumination at adjustment points No. 2, No.3, No.10 and No.11. The values should be: No.2 = Y2 [lx] No.10 = Y10 [lx] No.3 = Y3 [lx] No.11 = Y11 [lx] 4. No.2 and No.3 adjustment points have the average of Y2 and Y3. Y2 = ( Y2 + Y3 ) / 2 ± 2 [%] Y3 = ( Y2 + Y3 ) / 2 ± 2 [%] 5. No.10 and No.11 adjustment points have the average of Y10 and Y11. Y10 = ( Y10 + Y11 ) / 2 ± 2 [%] Y11 = ( Y10 + Y11 ) / 2 ± 2 [%] 6. Then adjust the [MID-1] tone [R] and [B]. When the background is [G] monochrome, press the [ENTER] key on the remote control to switch to solid white. 7. Measure the color coordinates of adjustment point [No.1] and make a note of them. Assume that they are x = x1, y = y1. Note: When the CL-100 color and color difference meter is used, the [ ∆ ](delta) mode is convenient. When adjustment point [No.1] color coordinate has been selected, set the slide switch on the side to [∆ ](delta) while holding down the [F] button on the front panel. The measurement shown after this displays the deviation from measurement point 1. 8. Measure the color coordinates of measurement point [No.2] and adjust [No.2][R:] and [B:] so that the coordinates are as follows. x = x1 ± 0.005 , y = y1 ± 0.010 9. Similarly, measure adjustment points [No.3] to [No.17] and adjust their color coordinates starting in order from the small number points. This completes adjustments required for [MID-1]. Note: Since excessive correction may lead to a correction data overview during internal calculations, use the following values for reference. [No.2] to [No.5] ± 40 or less [No.6] to [No.9] ± 50 or less [No.10] to [No.13] ± 70 or less [No.14] to [No.17] ± 120 or less 10.Then adjust the [MIN] tone [G] so that the adjustment values are two times as much as MID-1] tone [G] values. This completes [G] color adjustments. 11.Then adjust [MIN] tone [R] and [B]. Select [No.2] [B:] and press the [ENTER] key on the Remote control transmitter to change to solid white. 12.Measure the color coordinates of adjustment point [No.1] and make a note of them. Assume that they are x = x1, y = y1. 13.Now measure the color coordinates of measurement point [No.2] and adjust [No.2][R:] and [B:] so that the coordinates are as follows. x = x1 ± 0.005 , y = y1 ± 0.010 (Target) x = x1 ± 0.020 , y = y1 ± 0.040 14.Similarly, measure adjustment points [No.3] to [No.17] and adjust their color coordinates starting in order from the small number points. This completes [MIN] tone adjustments. 15.Now make similar adjustments for [MID-2] tone. (Adjust [MID-2] tone [G] so that the adjustment data set half as many as [MID-1] tone [G].) 16.Now make similar adjustments for [MID-3], [MID-5], [MAX] tones. (It is not necessary to adjust the [G] data in these tones.) 17. After comleting the step 16, set the value of the [MID-4] tone [R]: [No.2] to the mean of the values of the [R]: [No.2] in the [MID-3] and [MID-4] tones. 18. Set all the values for the [No.2] to [No.17] of the [MID-4] tone [R] and [B] in the same way as the step 17. 19. Finally, set the data of the [MID-6] tone [R] and [B] using the values of the [MID-5] and [MAX] tones in the same way as the [MID-4] tone [R] and [B] adjustments in the step 17 and 18. 10 ED-X10/ED-X12(CC9XM2) Adjustment procedure 2 (visual inspection) 1. First adjust [MIN] tone [G:]. 2. Select [No.2] [G:]. If the background is [G] monochrome, press the [ENTER] key on the remote control to switch to solid white. 3. View measurement point [No.2] and [No.3]. Lower the [G] color intensity only of the color point whose [G] color is more intense than measurement point [No.1]. 4. View measurement point [No.10] and [No.11]. Lower the [G] color intensity only of the color point whose [G] color is more intense than measurement point [No.1], and raise the intensity of the point whose color intensity is lower than measurement point [No.1]. 5. Now adjust the [MIN] tone for colors [R] and [B]. 6. View measurement points [No.2], [No.3], [No.10] and [No.11]. Adjust the [R] and [B] of each measurement point so that they have the No. 2 deviation range 14 10 12 16 6 4 8 2 1 3 11 5 9 7 15 13 No. 4 deviation range 14 10 12 16 6 4 8 2 1 3 11 5 9 7 15 13 10 12 16 6 4 8 2 1 3 11 5 9 7 15 13 10 12 16 6 4 8 2 1 3 11 5 9 7 15 13 10 12 4 8 2 1 3 11 5 9 15 13 14 10 14 10 12 4 8 2 1 3 11 5 9 13 10 10 4 8 2 1 3 11 5 9 10 15 9 10 6 4 8 2 1 3 11 5 9 8 2 1 3 11 5 9 16 6 4 8 2 1 3 11 5 9 13 12 10 15 11 16 6 4 8 2 1 3 11 5 9 7 17 13 10 12 4 8 2 1 3 11 5 9 15 13 17 No. 13 deviation range 14 10 12 16 6 4 8 2 1 3 11 5 9 15 13 17 No. 9 deviation range 14 10 12 16 6 4 8 2 1 3 11 5 9 15 17 13 No. 17 deviation range 14 10 12 15 16 6 4 8 2 1 3 11 5 9 7 17 16 6 7 17 No. 16 deviation range 14 14 7 17 12 15 16 4 16 13 No. 11 deviation range 7 17 12 7 6 13 5 13 14 17 12 3 11 No. 8 deviation range No. 15 deviation range 14 1 15 16 13 2 7 6 15 8 14 17 12 4 No. 5 deviation range No. 7 deviation range 14 16 6 15 16 6 15 12 7 17 No. 12 deviation range 7 17 No. 3 deviation range 16 6 7 17 No. 14 deviation range 14 14 7 17 No. 6 deviation range 14 No. 10 deviation range 7 17 same color as measurement point [No.1]. Adjustment technique: First, adjust [B:] of the point whose color is to be adjusted so that it approximates that of [No.1]. If [R:] is low at this time, the image will have cyan cast, in which case [R:] is increased. On the other hand, if [R:] is excessive, the image will have a magenta cast, in which case [R:] is decreased. Overall, a cyan cast makes it easy to see color shading. 7. Next, view measurement points [No.4], [No.5], [No.12], [No.13] and make similar adjustments. 8. Then adjust measurement points [No.6], [No.7], [No.8], [No.9], [No.14], [No.15], [No.16] and [No.17]. This completes the [MIN] tone adjustments. 9. Make similar adjustments for other tones, except the [MID-4] and [MID-6] tones, as described in steps 1 to 8 above. 13 17 ED-X10/ED-X12(CC9XM2) 5. Troubleshooting Check points THERMAL SWITCH (TSW) E801 S801 IS01 E800 IS06 E2 IS07 E301 IS08 IS09 E802 P501 IS03 IS02 D303 (LAMP) D301 (POWER) D302 (TEMP) E304 E1 P701 E807 PWB assembly MAIN E302 E806 E3 EASP E805 PWB assembly REMOTE Speaker cable 12 EK01 P601 ED-X10/ED-X12(CC9XM2) Power can not be turned on Are voltage supplied at pins (6) and (8) of E800 on the PWB assembly MAIN in standby mode? YES *: Be sure to unplug the power cord before measuring resistance. NO Measure resistance* between pins (6) and (10), and between pins (8) and (10) of E800. (6): +6.0V (8): +4.0V (10): GND 0Ω PWB assembly MAIN Power unit (circuit) Open Disconnect TSW from power unit circuit, and measure resistance of TSW. Open Termal switch (TSW) Short Power unit (circuit) Are voltage supplied NO at pins (1) and (4) of E800 on the PWB assembly MAIN in standby mode? (1): +15V (3): GND(for +15V) YES (4): +17V (10): GND(for +17V) Does LAMP (D303) or TEMP (D302) indicator light or blink? Measure resistance* between pins (1) and (3), and between pins (4) and (10) of E800. Fuse on the power unit (circuit) 0Ω PWB assembly MAIN Power unit (circuit) Open Power unit (circuit) YES Go to the next page NO PWB assembly MAIN 13 ED-X10/ED-X12(CC9XM2) Lamp does not light What is the state of LAMP indicator D303 during operation? Blinks Open Lamp door Re-attach lamp door Re-attach PWB assembly MAIN *: Be sure to unplug the power cord before measuring resistance. Light Is the LAMP installation correct? Measure resistance* between pins (1) and (2) of S801 when the lamp door is secure. Not light and blink PWB assembly MAIN install the Lamp YES Is the voltage at the (1) of E804 on the PWB assembly MAIN fixed to "L" during warmingup? 0Ω NG YES “L” = 0V PWB assembly MAIN Not light **: DC fan connectors are E801, E802, E806, and E807. Change the lamp. Does lamp light? Light Lamp No NO (0V) PWB assembly MAIN NO (0V) PWB assembly MAIN Correct Are the voltage supplied to the pin (2) of connectors** for DC fans soon after the button is pressed? YES (5V or higher) Power unit (ballast) Blinks What is the state of TEMP indicator D302? Observe the voltage waveforms at pin (1) of connectors for DC fans** soon after the button is pressed. OK PWB assembly MAIN E1/E2: 5 to 20kΩ E3: 0.5 to 2kΩ NG(open/short) Is the voltage at the (3) of E804 on the PWB assembly MAIN set to "L" during warming-up? Thermistor (E1/E2/E3) YES “L” = 0V PWB assembly MAIN No Power unit (ballast) PWB assembly MAIN incorrect Measure resistance of E1, E2 and E3 after disconnecting them from MAIN board. Not light and blink Is the voltage supplied to the pin (4) of E801 soon after the button is pressed? YES (1V or higher) Lights Power unit (circuit) Correct waveform is drawn below. DC fan (failed in above check) f ≥ 40Hz 14 ED-X10/ED-X12(CC9XM2) Picture is not displayed. Are the splash screen and the user menu displayed correctly? Confirm the LCD Panels connection to the MAIN board. No PWB assembly MAIN No PWB assembly MAIN YES Is the picture from RGB out port displayed correctly on another monitor display? No PWB assembly MAIN SN74LVC1G97 (IS06/IS07) YES EL8302IUZ (IS02/IS03) Is the message of ” No input is detected on **” or “Sync is out of range on **” displayed on the screen? YES SN74LVC1G97 (IS08/IS09) No PWB assembly MAIN CPC30 connector A/B OK YES Are all of the pictures from video, s-video and component video ports displayed correctly? NG EL8302IUZ (IS02/IS03) 15 LCD/Lens prism assembly ED-X10/ED-X12(CC9XM2) No sound Check at operating mode (Make sure the state of MUTE and Volume) Disconnect the speaker from the PWB assembly Main, and measure its resistance. infinity Speaker about 8 PWB assembly Main Can not control to RS-232C The check after parts change Check the RS-232C cable. Are pin No. 2 and 3 crossed? NO Use cross cable YES Are the signals input at each NO pins on the PWB assembly Main? EK01 : RX EK01 : TX YES PWB assembly MAIN Make sure PC setup 16 1. PC power supply OFF 2. Connection of cable 3. Projector starting 4. PC starting *When not operating : PC set up change of cable. ED-X10/ED-X12(CC9XM2) 6. Service points 6-1 Lead free solder [CAUTION] This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions before attempting any soldering work. CAUTION Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free solder can splatter at high temperatures (600˚C). Lead free solder indicator Printed circuit boards using lead free solder are engraved with an "F" or "LF". Properties of lead free solder The melting point of lead free solder is 40-50˚C higher than leaded solder. Servicing solder Solder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended. Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not taking these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.) Precautions when using leaded solder Remove all lead free solder from soldered joints when replacing components. If leaded solder should be added to existing lead free joints, mix in the leaded solder thoroughly after the lead free solder has been completely melted (do not apply the soldering iron without solder). Servicing soldering iron A soldering iron with a temperature setting capability (temperature control function) is recommended. The melting point of lead free solder is higher than leaded solder. Use a soldering iron that maintains a high stable temperature (large heat capacity), and that allows temperature adjustment according to the part being serviced, to avoid poor servicing performance. Recommended soldering iron: Soldering iron with temperature control function (temperature range: 320-450˚C) Recommended temperature range per part: Part Soldering iron temperature Mounting (chips) on mounted PCB 320˚C±30˚C Mounting (chips) on empty PCB 380˚C±30˚C Chassis, metallic shield, etc. 420˚C±30˚C The PWB assembly which has used lead free solder (1) PWB assembly MAIN (4) POWER UNIT (BALLAST) (2) PWB assembly REMOTE (5) POWER UNIT (CIRCUIT) (3) PWB assembly CONTROL 17 ED-X10/ED-X12(CC9XM2) 6-2 Before Replacing The LCD/Lens Prism You should not replace separately the parts of the liquid crystal LCD/Lens prism because it works properly only when used together. Therefore, regarding these parts, you can either replace part, LCD/Lens prism assembly, or send the whole unit LCD/Lens prism assembly back to HITACHI, where we will replace the malfunctioning part, recondition the device and send it back to you. DISTRIBUTOR G Panel Do not disassemble the unit because replacement of separate parts is not possible. HITACHI Replacement of G Panel Return Reconditioning 6-3 Cleaning up dust from panels and optical filters WARNING Wear sunglasses to protect your eyes when you maintain the projector with its lamp on. 1. Preparation Please prepare cleaning tools and materials as follows. And prepare relatively clean room not to work in additional dust, while removing operation. (1) Swab for cleaning : P#: NX08061, "Cotton stick L147" (2) Air duster (Dust blower, spray can) (3) Vacuum cleaner 2. Disassemble and setting up. (1) Turn off the projector, and unplug the power cord. (2) Remove the lamp cover and upper case, according to the disassembling diagram of chapter 8. (3) Unscrew the shield sheet and disconnect the LCD panel flexible cables. (4) Unscrew PWB assembly MAIN to make it free. Remove these screw Flexible cables of LCD panel PWB assembly MAIN Remove these screws (5) Press and hold the switch S801 using an insulator during maintenance. (6) Keep the unscrewed wires away from all of electric parts. 18 ED-X10/ED-X12(CC9XM2) 3. Maintenance point Swab Panel Holder Optical filter Actual formation Each color part has same construction. By using swab and air duster, you can easily remove dust from panel and optical filter. Separatied formation 4. Cleaning the panels and optical filters (1) Turn on the set and lit on the lamp. (2) By using swab and air duster, remove the dust. Focusing dust makes you check the dust on screen. • While removing the dust, separated dust will be blown off by air cooling system. • Please pay attention not to damage panels and optical filters. Swab Panel Holder Air Optical filter 5. Re-assembly (1) Turn off the set and unplug the power cord. (2) Remove an insulator from S801. (3) Screw down the PWB assembly MAIN and connect the LCD panel flexible cables to the PWB assembly MAIN. (4) Re-assemble the set. (5) While re-assembling, please clean the intake filter by using a vacuum cleaner. 19 ED-X10/ED-X12(CC9XM2) 6-4 Putting batteries WARNING Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment. ●Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one. ●Make sure the plus and minus terminals are correctly aligned when loading a battery. ●Keep a battery away from children and pets. ●Do not recharge, short circuit, solder or disassemble a battery. ●Do not allow a battery in a fire or water. Keep batteries in a dark. cool and dry place. ●If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the flower adheres your body or clothes, rinse well with water immediately. 1. Remove the battery cover. Slide back and remove the battery cover in the direction of the arrow. 2. Insert the batteries. Align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control. 3. Close the battery cover. Replace the battery cover in the direction of the arrow and snap it back into place. The signal settings for the remote control transmitter and the projector's remote sensor can be changed. If the remote control does not function properly try changing the signal setting. Changing the signal setting for the remote control transmitter (1) Setting 1 (FREQ. : NORMAL) Simultaneously press and hold the MUTE and RESET buttons for about 3 seconds. (2) Setting 2 (FREQ. : HIGH) Simultaneously press and hold the MAGNIFY OFF and ESC buttons for about 3 seconds. •Setting 1 is the factory default setting. •When the batteries are removed from the remote control, user-specified settings are saved for about half a day. If the batteries are removed from the remote control for longer than half a day, the remote will reset to Setting 1. Changing the signal setting for the projector's remote sensor Switch between Setting 1 and 2 using the SERVICE/REMOTE FREQ. item found in OPTION MENU. Use the ▲/▼ button to change the Projector's remote sensor setting. 1:NORMAL ↔ 2:HIGH Items with a checkmark are on. The factory default setting is for both 1:NORMAL and 2:HIGH to be on. If the remote control does not function correctly set this to either only 1 or only 2. Neither can be turned off at the same time. NOTE: The remote control will not function properly if the remote control transmitter settings and the projector's remote sensor settings are not the same. 20 ED-X10/ED-X12(CC9XM2) 6-5 Air filter WARNING • Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause an electric shock, a burn and/or malfunction to the projector. • Use only the air filter of the specified type. Do not use the projector with the air filter and the filter cover removed. It could result in a fire and/or malfunction to the projector. • The air filter should be cleaned periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn and/or malfunction to the projector. NOTE • Please replace the air filter when it is damaged or too soiled, and also when you replace the lamp. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter. • The projector may display the message such as “CHECK THE AIR FLOW” or turn itself off, to prevent the internal heat level rising. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn and/or malfunction to the projector. When the indicators or a message prompts to clean the air filter, clean the air filter as soon as possible. Please check and clean the air filter periodically, even if there is no message.Please replace the air filter when it is damaged or too soiled. And also when you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the lamp to Handle cool for at least 45 minutes. 2. When the projector is suspended from the ceiling, apply the vacuum Filter cover cleaner to and around the filter cover first, to prevent penetration of dust or the like. 3. While supporting the projector with one hand, use your other hand to pull the filter cover forward in the direction of the arrow. Remove the air filter. 4. Apply a vacuum cleaner to the air filter and the filter cover. Please replace the air filter when it is damaged or too soiled. 5. Replace the air filter in its original position. Secure the air filter in place by pressing each of the six locations. Make sure there is no dust or dirt remaining after the cover is in place. If any dust or dirt remains, use a vacuum cleaner to remove it as when placing the filter cover on the air filter. Reattach the filter cover to the projector by aligning the filter cover with the grooves on the projector. While holding the handle, push down on the filter cover until it locks firmly in place. Air filter’s knob 6. Turn the projector on and reset the filter time using the FILTER TIME function. (1) Press the MENU button to display a menu. When the EASY MENU has appeared, please skip the next step (2). mark Air filter (2) Point at the “OPTION” in the left column of the menu using ▼/▲ Filter cover button, then press the ► button. (3) Point at the “FILTER TIME” using ▼/▲ button, then press the ► button. A dialog will appear. (4) Press the ▲ button to select “RESET” on the dialog. It performs resetting the filter time. 21 ED-X10/ED-X12(CC9XM2) 6-6 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ●The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes. ●About disposal of a lamp • This product contains a mercury lamp; do not put it in the trash. Dispose of in accord with environmental laws. For lamp recycling, go to www.lamprecycle.org. (in the US) For product disposal, contact your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada). • If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet. Note that shards of glass could damage the projector’s internals, or cause injury during handling. Disconnect • If the lamp should break (it will make a loud bang when it does), ventilate the room well, and the plug make sure not to breathe the gas that comes out of the projector vents, or get it in your eyes from the or mouth. power • Before replacing the lamp, turn the projector off and unplug the power cord, then wait at least outlet 45 minutes for the lamp to cool sufficiently. Handling the lamp while hot can cause burns, as well as damaging the lamp. • Never unscrew except the appointed (marked by an arrow) screws. • Do not open the lamp cover while the projector is suspended from above. This is dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is opened. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or injury. • Use only the lamp of the specified type. • If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to burst during use. • Using the lamp for long periods of time could cause it dark, not to light up or to burst. When the pictures appear dark, or when the color tone is poor, please replace the lamp as soon as possible. Do not use old (used) lamps; this is a cause of breakage. 22 ED-X10/ED-X12(CC9XM2) Replacing the Lamp A lamp has a finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after being started using. 1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for Lamp cover at least 45 minutes. 2. Prepare a new lamp. 3. Loosen the lamp cover screw (marked by arrow) and then slide the lamp cover to the side to remove it. 4. Loosen the 2 screws (marked by arrow) of the lamp, and slowly pick up the Screw lamp by the handles. Screws 5. Insert the new lamp, and retighten firmly the two screws that are loosened in the previous process to lock it in place. 6. Slide the lamp cover back in place and firmly fasten the lamp cover screw. 7. Turn the projector on and reset the lamp time using the LAMP TIME function in the OPTION menu. (1) Press the MENU button to display a menu. Only when the EASY MENU has Handle appeared, please perform the next step (2). (2) Point at the “Go to Advanced Menu …” in the menu using ▼/▲ button, then press the ► button. (3) Point at the “OPTION” in the left column of the menu using ▼/▲ button, then press the ► button. (4) Point at the ”LAMP TIME” using ▼/▲ button, then press the ► button. A dialog will appear. (5) Press the ▲ button to select “RESET” on the dialog. It performs resetting the lamp time. NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. 23 ED-X10/ED-X12(CC9XM2) 6-7 Other care WARNING Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/ or malfunction to the projector. Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and and/or malfunction to the projector. • Don’t put a container containing water , cleaner or chemicals near the projector. • Don’t use aerosols or sprays. CAUTION Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. • Do not use cleaner or chemicals other than those listed below. • Do not polish or wipe with hard objects. Inside of the projector In order to ensure the safe use of the projector, it needs to clean and inspect the projector about once a year. Caring for the lens If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautions of the handling. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth. If soiling is severe, dip soft cloth in water or a nautral cleaner dilute in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth. 24 ED-X10/ED-X12(CC9XM2) 6-8 Notice of AUTO adjustment Use of AUTO adjustment with the image through RGB input optimizes V_POSI, H_POSI, H_SIZE and H_PHASE automatically. In case that projected image has dark tone around its peripheral, AUTO operation sometimes makes artifacts in the image, shifts capture area and so on. Those failures are caused by period of image data is not exactly distinguished to period of blanking on signal processing. To avoid such phenomena, AUTO function should be used with the full size picture that has bright tone on its peripheral. Image when AUTO operates correctly Image when AUTO fails. Noting image of top or bottom lines. Shift of the image to East or West. Artifacts on image. Etc. Note 1) The phenomenon at the failure of AUTO adjustment depends on resolution of input source, scene of picture etc. 2) There is no failure above in AUTO with video source through VIDEO, S-VIDEO or COMPONENT input. The reason is why recognition of input signal’s standard does not need to search the capture range from input signal itself. 25 ED-X10/ED-X12(CC9XM2) 6-9 How to inactivate the security functions This projector is equipped with security functions. (1)MyScreen PASSWORD The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. (2)PIN LOCK PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. (3)Transition detector Transition detector is a function which prevents the projector from being used unless the recorded vertical angle of the projector and mirror setting is set. 64#05+6+10&'6'%61410 6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP 2+0$1: +H[QWYKUJVQJCXGCUSWCTGKOCIG QPUETGGPCICKP FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW Transition Detector Alarm It is possible to inactivate all security functions with following procedures. (1) Go to “SECURITY” on OPTION Menu and press the ► button. Then, ENTER PASSWORD box will be displayed. (The BOX will be displayed by pressing the [MENU] button (remote) or [▲/▼/◄/►] button (keypad) when Transition Detector Alarm is displayed.) 5'%74+6; '06'42#55914& 㪇㩷㩷㩷㪇㩷㩷㩷㪇㩷㩷㩷㪇 37+6 0':6 ENTER PASWORD box (2) Press the [Magnify off] button once, then press [Magnify off] button of remote for 3 second or more to display SERVICE PASSWORD box. 5'48+%' '06'42#55914& 㪄㩷㩷㩷㪄㩷㩷㩷㪄㩷㩷㩷㪄 SERVICE PASWORD box (3) Enter the Life Key (MENU, ▼, KEYSTONE, ▲). Then all security functions will be inactivated. Note: • The Life key can be used up to 30 times. The key cannot be used thereafter. If the Life key cannot be used, see the paragraph of SECURITY in the User’s Manual. The frequency in which Life key is input will be set to 0 after the registered code is input. • The SECURITY Menu can not be operated if the SECURITY PASSWORD was released by Life key. • The Mirror, Keystone and Auto keystone are not memorized though they are possible to operate if Transition Detector was released by Life key. • The MyScreen Lock on SCREEN Menu keeps “TURN ON” if MyScreen PASSWORD was set when SECURITY PASSWORD was released by Life key. 26 ED-X10/ED-X12(CC9XM2) 6-10 PIN LOCK System If the following PIN BOX menu appears after power on the projector, the PIN LOCK system has been activated. Under such a condition, key operations and signal displaying are inhibited. To open the PIN LOCK system, we need to input the correct 4 digits PIN CODE. If correct PIN CODE is not input in 5 min., the lamp will be automatically turned off. PIN BOX Returning repaired unit Use the Master PIN code. See the paragraph of Releasing the PIN LOCK system inactivation. Swap unit/Returned unit Inactivate the PIN LOCK system. See the paragraph of the PIN LOCK system inactivation. Releasing the PIN LOCK System When the PIN BOX menu is displayed, sequentially enter the codes with remote controller as follows. In accordance with remote controller button entry, “ ” mark appears in the PIN BOX menu. Master PIN codes 1st entry code: Press the “MENU ” button. 2nd entry code: Press the “ ” button. 3rd entry code: Press the “KEYSTONE” button. 4th entry code: Press the “ ” button. Note: The Master PIN codes can be used up to 30 times. The codes cannot be used thereafter. If the Master PIN codes cannot be used, see the paragraph of the PIN LOCK system inactivation. The PIN LOCK System inactivation 1. When the PIN BOX menu is displayed, press “RESET” for 3 seconds or more in order to get the ID Inquiring Code. PIN BOX Inquiring Code 12 1234 1234 Inquiring Code PIN BOX (ID Inquiring Code) 2. Send HITACHI sales company the Inquiring code (10 digits) to inquire the correct PIN code. 3. With the PIN BOX menu displayed, input the correct PIN code. Enter the correct PIN CODE that HITACHI sales company informed. 4. Open menu and select “TURN OFF” from the PIN LOCK items in the SECURITY menu. Then the PIN BOX menu appears. 5. Input the correct PIN code in the PIN BOX menu. 6. And then, PIN LOCK will be set to “TURN OFF”. 27 ED-X10/ED-X12(CC9XM2) 6-11 Related Messages When the unit’s power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on. Message NO INPUT IS DETECTED *** Description There is no input signal. Please confirm the signal input connection, and the status of the signal source. SYNC IS OUT OF RANGE The horizontal or vertical frequency of the inputted signal is outside of the *** response parameters of this unit. fH *****kHz fV *****Hz Please confirm the specs for this unit or the signal source specs. CHECK THE AIR FLOW REMINDER ***HRS PASSED AFTER THE LAST FILTER CHECK. FILTER MAINTENANCE IS ESSENTIAL TO REMOVE WARNING MESSAGE, RESET FILTER TIMER. The internal portion temperature is rising. Please turn the power OFF, and allow the unit to cool down at least 20 minutes. After having confirmed the following items, please turn the power ON again. • Is there blockage of the air passage aperture? • Is the air filter dirty? • Does the peripheral temperature exceed 35°C? If the same indication is displayed after the remedy, please set FAN SPEED of the SERVICE item in the OPTION menu to HIGH. A note of precaution when cleaning the air filter. Please immediately turn the power OFF, and clean or change the air filter by referring to the “Air Filter” section of this manual. After you have cleaned or changed the air filter, please be sure to reset the filter timer. SEE MANUAL FURTHER INFO. 28 ED-X10/ED-X12(CC9XM2) 6-12 Regarding the indicator lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please respond in accordance with the instructions within the table. POWER indicator LAMP TEMP indicator indicator Description Lighting In Orange Turned off Turned off The projector is in a standby state. Blinking In Green Turned off Turned off The projector is warming up. Please wait. Lighting In Green Turned off Turned off The projector is in an on state. Ordinary operations may be performed. Blinking In Orange Turned off Turned off The projector is cooling down. Please wait. Blinking In Red (discretionary) (discretionary) The projector is cooling down. A certain error has been detected. Please wait until the POWER indicator finishes blinking, and then perform the proper measure using the item descriptions below. Turned off The lamp does not light, and there is a possibility that interior portion has become heated. Please turn the power off, and allow the projector to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation of the following items, and then turn the power on again. • Is there blockage of the air passage aperture? • Is the air filter dirty? • Does the peripheral temperature exceed 35ºC? If the same indication is displayed after the remedy, please change the lamp referring to the section “Lamp”. Blinking In Red Turned off The lamp cover has not been properly fixed (attached). Please turn the power off, and allow the unit to cool down at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp cover. After performing any needed maintenance, turn the power on again. Turned off The cooling fan is not operating. Please turn the power off, and allow the unit to cool down at least 20 minutes. After Blinking the projector has sufficiently cooled down, please make confirmation that no foreign In Red matter has become caught in the fan, etc., and then turn the power on again. If the same indication is displayed after the remedy, please replace a fan. Turned off There is a possibility that the interior portion has become heated. Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation of the following items, and then turn the power on again. Lighting • Is there blockage of the air passage aperture? In Red • Is the air filter dirty? • Does the peripheral temperature exceed 35°C? If the same indication is displayed after the remedy, please set the FAN SPEED of the SERVICE item in the OPTION menu to HIGH. Blinking In Red or Lighting In Red Blinking In Red or Lighting In Red Blinking In Red or Lighting In Red Blinking In Red or Lighting In Red Lighting In Red Lighting In Green Alternative blinking in Red Lighting In Green Simultaneous blinking in Red There is a possibility that the interior portion has become overcooled. Please use the unit within the usage temperature parameters (5°C to 35°C). After the treatment, resent the power to ON. If the same indication is displayed after the treatment, please make sure that the proper cables are connected to each of connectors E301, E302 and E304 on the PWB assembly MAIN. It is time to clean the air filter. Please immediately turn the power OFF, and clean or change the air filter referring to the section “Air Filter”. After cleaning or change the air filter, please be sure to reset the filter timer. After the remedy, resent the power to ON. NOTE • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “○” (OFF) side of the power switch, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. 29 ED-X10/ED-X12(CC9XM2) 6-13 HIDDEN SERVICE MENU To display the OSD for “HIDDEN SERVICE MENU” set up. HIDDEN SERVICE AIR-SENSOR EXECUTE LAMP ALARM NOTE LENS TYPE 1 STARTUP TYPE 1 SOFT RESET By the control panel By the remote control transmitter 1. Display the Advanced menu by 1. Display the menu by the the “MENU” button.(If EASY “MENU” button. (If EASY MENU appears, choose “Go to MENU appears, choose “Go to Advanced menu” to display Advanced menu” to display ADVANCED MENU.) ADVANCED MENU.) 2. Select the “OPTION” on the 2. Select the “OPTION” on the menu. menu. 3. Press the “MAGNIFY OFF” 3. Continue press the button [ ] button. first, then press the button [ ] Next hold the “MAGNIFY OFF” together with “INPUT”, and hold button for 3 seconds. for 3 seconds. SOFT RESET If this is executed, all of the user data is initialized.Never use it when not required. 6-14 RUN TIME window Set operating time display method (accumulated lamp time display method) 1. Select “ OPTION” from the Advanced menu, then place the cursor on the “LAMP TIME”. 2. Press the [ ], [ENTER] or [RESET] button. 3. Press the [Reset] button once, then press [KEYSTONE] button of the remote control for 3 seconds or more to display the screen shown below. (The menu will close after 10 seconds if there are no further operations.) 4. Use [ ] or [ ] to select the usage status number. (The usage status is as shown below.) RUN TIME LAMP BRIGHT NORMAL AC On Off 1234 h 1000 h 234 h 2000 h 1 0 No.0 Lamp time Lamp time(BRIGHT) Lamp time(NORMAL) AC energizing time Number of times on Number of times off Usage status number(See below) Usage status number 0 ..... Total usage status 1 ..... Current usage status 2 ..... Usage status before first reset 3 ..... Usage status before second reset || 9 ..... Usage status before eighth reset 30 FB5 31 Seal Confirm that the print indicates Area of Importance Make sure to confirm the print of the TSW. TSW It is not necessary to secure the FB5 with a cable tie. Area of Importance Attach the FB5 (ferrite core) to CNPOW. Make sure to completely lock the hook when attaching the FB5. CNPOW CNPWR CN102 Make sure to securely connect the CNPOW, TSW, and CNPWR to the circuit power supply (as it cannot be confirmed whether they are securely connected in later processes). Wiring of the circuit power supply main board (1)Connect the TSW. Make sure to confirm the seal (based on the diagram below) when attaching the TSW. (2)Connect the CNPWR, attach FB2 (3)Connect the CNPOW, attach FB5 Wiring of the circuit power supply (1/2) Z2 FB2 Heat sink FB2 Wiring diagram 1 CN101 50±5mm CN103 Heat sink CNPWR Secure the FB2 to the CNPWR with the cable tie Z2, as indicated in the diagram. Cut the cable tie with 2 to 3 mm of excess length remaining. Area of Importance Attach the FB2 (ferrite core) to the CNPWR. Make sure to completely lock the hook when attaching the FB2. The operations with this symbol have implications with laws/standards. It is possible to be in violation of these laws/standards in the case that these operations are not carried out according to the instructions. Assemble according to the operation instructions. Area of Importance ED-X10/ED-X12(CC9XM2) 7. Wiring diagram FB5 32 View from the side View from above Correct Heat sink Power supply sheet Heat sink Heat sink Incorrect Heat sink Power supply sheet CN101 Heat sink FB2 Incorrect (dotted line) Luover of the power supply case Clamp CNPWR Wiring diagram 2 Clamp CNSH2 CNSH2 E2 Outline of power supply case holes Make sure to pass the CNSH2 through the hole indicated in the diagram below. [CAUTION] Make sure to attach the power supply sheet after attaching the CNSH2. Fasten the E2 with tape ZTP1. Make sure to stick the tape along the outline of the power supply case holes as shown in the diagram. ZTP2 ZTP1 Power supply sheet Fasten the CNSH2 and E2 with tape, ZTP1 and ZTP2, after passing them through the clamps of the power supply case. [CAUTION] As the upper case touches the gray areas of the diagram on the right, make sure no wires protrude into these areas. CN103 Power supply case Don’t wire the E2 on the louvers. The solid line in the diagram indicates an example of correct wiring. The dotted lines in the diagram indicate examples of incorrect wiring. Correct (solid line) Heat sink Heat sink CN102 Fastener Lock the CNPOW, TSW by passing them through the power supply case fastener. When pulling out the CNPWR and FB2, make sure that they do not pass over the heat sink, as this will lift the power supply sheet. Pass the CNPWR through the hole in the power supply sheet, and pull the wire out. CNPOW TSW Wiring of the circuit power supply board (1)Style the CNPOW, TSW. (2)Attach the CNSH2. (3)Attach the power supply sheet. (4)Style the CNPER. Wiring of the circuit power supply (2/2) ED-X10/ED-X12(CC9XM2) 33 Ballast power supply Ballast sheet FB3 Pull out the CNBAR, sirocco fan lead, and FB4 from the sheet hole after passing them under the ballast sheet. Make sure the sag in the wires is absorbed in the direction of the arrow. FB4 Sirocco fan Sirocco fan lead CNBAR FB4 Sirocco fan lead Wiring diagram 3 Be careful when handling the ballast power supply. Do not hold the small circuit board of the ballast power supply. Make sure to connect the CNBAR before attaching the ballast power supply. Insert connector straight. The termination of the connector is likely to be bent and broken by inserting it diagonally. Area of Importance Attach the FB3 (ferrite core) to the lamp lead of the ballast power supply. Make sure to completely lock the hook when attaching the FB3. ㊀ⷐᬺᚲ Pull out the lamp lead of the ballast power supply by passing it through the slit in the ballast sheet. Style by turning the boss on the bottom case. LAMP FAN BKT Bracket Style the lamp lead of the ballast power supply by passing it through the groove in the bottom case. Make sure the lamp lead of the ballast power supply does not touch with the LAMP FAN BKT bracket when styling it. Make sure the sag in the wires is absorbed in the direction of the arrow. Ballast sheet CNBAR Ballast power supply Wiring of the ballast power supply board (1)Attach and wire the FB3 to the lamp lead (2)Attach the FB4, and wire the CNBAR and sirocco fan. Wiring of the ballast power supply CNBAR If the wire of the CNBAR sags, it will get close to the primary circuit inside the ballast power supply. Therefore, be careful of where you attach the FB4, as it prevents the CNBAR wire from sagging. Style the sirocco fan lead by winding it around the top, to prevent the lead escaping the hook. Fasten the fan lead with tape ZTP5 after styling. 40±5mm [CAUTION] Be careful of where you attach the FB4. ZTP5 Sirocco fan lead It is not necessary to secure the FB4 with a cable tie. Area of Importance Attach the FB4 (ferrite core) to the CNBAR and sirocco fan lead. Wind the CNBAR around once. Make sure to completely lock the hook when attaching the FB4. FB4 Be careful not to pinch the wires when locking. ED-X10/ED-X12(CC9XM2) 34 Lamp SIrocco lead [CAUTION] Complete the pulling out of the lamp sirocco fan lead before attaching the optical engine. Wiring when assembling the power supply block (1)Connect and style the CNPWR (2)Wire the CNBAR and sirocco fan lead. Attach the power supply block. (3)Connect and wire the CNSH. (4)Wire the lamp sirocco fan lead. Wiring of the power supply block Wiring diagram 4 [CAUTION] Be careful not to pinch the CNBAR and sirocco fan lead when attaching the power supply unit. Circuit power supply Upper case Lamp house Bottom case Pass the CNSH through this gap. 㪘㪹㫊㫆㫉㪹㩷㪼㫏㪺㪼㫊㫊 㫃㪼㫅㪾㫋㪿㩷㫋㪿㫀㫊㩷㫎㪸㫐 [CAUTION] Connect the CNSH to the power supply case side only after assembling the power supply block. Pass the CNSH through the hole below the lamp door bracket, and style it by passing it through the gap between the bottom case and lamp house. Make sure the excess length of the wires is absorbed in the direction of the arrow. Area of Importance Connect the CNSH to the lamp door bracket and power supply case bracket. CNSH Cross-sectional diagram of this area Power supply case bracket [CAUTION] Assemble the power supply block after connecting the CNPWR. lamp door bracket CNPWR Connect the CNPWR to the ballast power supply. Make sure it is securely connected. (as it cannot be confirmed whether they are securely connected in later processes). ED-X10/ED-X12(CC9XM2) Wiring of the fans 35 CNRM FB8 remote board FB8 ZTP7 Style the E3 and lamp sirocco lead internally to prevent the protruding. Attach the FB6 in the corner of the Dichroic optics unit by tape(ZTP6) Hang the E3 on the hook of Dichroic optics unit. Attach the E3 to the Dichroic optics unit by tape(ZTP4). Area of Importance ZTP6 FB6 E3 Hook of the Dicroic optics unit ZTP4 duct duct ZTP7 Wiring diagram 5 View from the side FB7 This face is visible from outside. Do not put the tape on this face. hook of duct fan duct Remote board Little damage of the wire is assumed to be acceptable. sirocco fan lead 2. Hang the sirocco fan lead on the hook of duct. Attach the FB7 to the sirocco fan by tape. Set the FB6 in the corner of Dicroic optics unit by tape. FB6 ZTP6 hook of duct Lamp sirocco fan lead main board Lamp sirocco E3 CNRM FB7 Panel sirocco E1 Little damage of the wire is assumed to be acceptable. FB7 E1 1. Attach the FB7 to the E1. Hang the E1 on the hook of duct. Assembly procedure of fan lead, E1, CNRM Attach the FB6(ferrite core) to the lamp sirocco lead. Make sure to completely lock the hook when attaching the FB6. Attach the FB8 to the CNRM by ZTP12. Wrap diagonally the tape to the FB8. Set the FB8 with both ends of tape. See above diagram. ZTP12 30±10mm Area of Importance Attach the FB7(ferrite core) to the thermistor E1 lead. Attach the FB8(ferrite core) to the CNRM lead. Make sure to completely lock the hook when attaching the FB7 and FB8. Prepare the wiring of the fans before installing the main board (1)Attach the E1 to the FB7. (2)Style the E1, FB7, panel sirocco. Setting them by tape. (3)Attach the FB8 to the CNRM. Connect the CNRM to the remote board. (4)Attach the remote board. Style the CNRM. (5)Attach the FB6 to the E3. (6)Style the E3 and lamp sirocco. Pass under the sirocco fan lead and E1. CNRM FB8 3. Wire the CNRM passing under the sirocco fan lead and E1. ED-X10/ED-X12(CC9XM2) 36 main board Fasten the CNCO along the control board by tape. ZTP11 CNCO Control board Wiring when attaching the control board. (1)Attaching the control board to the I/O metal. (2)Connect the main board and Control board by CNCO. (3)Style and fix the CNCO. Preparation for attaching the main board Wiring diagram 6 I/O metal ZTP11 Control board Dichroic optics unit main board Prevention of hooking the CNCO. Prevent hooking the CNCO to the Dichroic optics unit when installing the main board. CNCO ED-X10/ED-X12(CC9XM2) Optical unit 37 Optical unit Power supply unit Optical unit LCD panel flexible cable Main board Confirm that none of the connector wires are pinched, and attach the main board. Insert the wires and core in the gap between the optical unit and the power supply unit. Power supply unit LCD panel flexible cable Main board With the connector connected, insert the terminal side of the main board into the bottom case, and pass the LCD panel flexible cables through the holes in the board. Power supply unit LCD panel flexible cable ard bo in Ma After lifting up the main board, connect the CNPOW, CNBAR, and sirocco fan. Wiring when attaching the main board (1)Prepare the TSW and CNSH2. (2)Temporarily style the E2, FG3, exhaust fan, and TSW/CNSH2. (3)Connect the CNPOW, CNBAR, and sirocco fan to the main board. (4)Attach the main board, and style the connectors. Wiring when attaching the main board (1/2) CNBAR E802 E800 FB2 E804 E2 Wiring diagram 7 Connect the CNPOW, CNBAR, and sirocco fan to the main board before attaching the main board. CNPOW Sirocco fan When attaching the main board, keep the wires of E2, exhaust fan, and TSW and CNSH2 (which have been prepared) out of the way by placing them on the top of the power supply unit. Exhaust fan CNSH2 TSW TSW Wind around 5 times. ZTP3 Fasten the end of the winding area with tape ZTP3. CNSH2 Fasten the end of the winding area with tape. Keep the prepared TSW and CNSH2 out of the way by placing them on the top of the power supply unit. Area of Importance Wind the TSW around the CNSH2 5 times. ED-X10/ED-X12(CC9XM2) 38 A83 speaker [CAUTION] Prevent the wires from protruding to the outside so that its wires connected to the connector on the edge of the main board, such as A83, are not pinched and damaged into the casing when attaching the upper case. Attach the upper case Hooked with the CNRM wire. Main board Upper case Connect the CNRM to the main board from above the A83 (speaker). Connect the sirocco fan and E1 to the main board. Connect the A83 (speaker) to the main board. CNBAT Lamp sirocco E3 A83 CNRM Sirocco fan Wiring when attaching the main board (1)Connect the LCD panel flexible cables. (2)Connect the E2 and exhaust fan. (3)Connect the speaker. (4)Connect and style the E1 and sirocco fan. (5)Attach the remote control board and connect and style the CNRM. (6)Connect and style the E3 and lamp sirocco fan. Wiring when attaching the main board (2/2) Wiring diagram 8 E801 Clamp E2 [CAUTION] Be careful when handling the LCD panel flexible cable. LCD panel P601 E301 Secure by sliding in the direction of the arrow FPC connector P601 E1 Connect the E2 to the main board after passing it through the clamp of the power supply bracket. CNSH2 TSW TSW Exhaust fan E801 [CAUTION] Make sure that wires do not pass through the shaded area on the diagram below, as they will be pinched by the ribs of the upper case. Connect the exhaust fan to the main board after passing it through the power supply clamp and TSW. Exhaust fan ED-X10/ED-X12(CC9XM2) 39 Damage of the shield by the screw tightening is assumed to be acceptable. It is acceptable if connected. Area of Importance Make sure to screw down the circuit board shield. TSW Wiring when attaching the circuit board shield. When attaching the circuit board shield. (1)Connect and wire the CNSH. (2)Wire the TSW. (3)Screw down the circuit board shield. Screw Upper case rib hole Tube ZTP10 ZTP3 CNSH2 ZTP9 Wiring diagram 9 Wire the TSW passing above the screw to keep away from the upper case rib hole. Main board Screw Tube TSW Pass the TSW lead over the screw head. Make sure to confirm that the tube is not put on the screw head. TSW Area of Importance Screw down the CNSH2 to the I/O metal at the torque of 0.49±0.05N•m manually. ZTP10 ZTP10 Fasten the TSW to the shield by tape like left diagram. [CAUTION] Absorb the excess length of the TSW by rolling the wire of TSW. Area of Importance Make sure to insert the circuit board shield between main board and lamp holder. Fasten the CNSH2 and TSW to the shield by tape like left diagram. [CAUTION] Confirm that the wires are not protruding to the screw area. Damage of the shield by the screw tightening is assumed to be acceptable. It is acceptable if connected. Area of Importance Make sure to screw down the circuit board shield. ED-X10/ED-X12(CC9XM2) ED-X10/ED-X12(CC9XM2) 8. Disassembly diagram 40 ED-X10/ED-X12(CC9XM2) 41 ED-X10/ED-X12(CC9XM2) Notice 1. Detach and attach the upper case. Follw the procedure below to detach and attach the upper case. When disassembling a. Remove the Lamp door. CAUTION The lamp door must be removed before the upper case when disassembling the machine. If the upper case is detached with the lamp door installed, the MAIN board might be damaged. Lamp door Loosen this screw b. Remove 7screws on the bottom and 3 screws on the rear to detach the upper case. CAUTION These are not screw holes. Do NOT insert a screw or screwdriver into them to avoid damaging the inside. 3 screws 7 screws 42 ED-X10/ED-X12(CC9XM2) When assembling a. Before attaching the upper case. Make sure that the speaker wires are routed correctly. NOTICE : Make sure that the soldering point of the wires and the speaker is within the shaded area as indicated in the drawing. Also, be careful not to change the original shape of speaker cone. Speaker cone Speaker wires Soldering point b. Tighten 7 screws on the bottom and 3 screws on the rear after attaching the upper case with the lamp door separated. CAUTION These are not screw holes. Do NOT insert a screw or screwdriver into them to avoid damaging the inside. In order not to make a gap between the upper and the bottom cases, tighten these screws while pressing down the upper case in the direction of the arrow. Be careful not to bend the outside casing.(Torque:0.390.59N•m) 43 ED-X10/ED-X12(CC9XM2) c. Attach the Lamp door. Lamp door CAUTION Tighten this screw using a manual screwdriver. 2. Replacing the power units. Remove the 4 screws to take off the ballast bracket. NOTE : One of screws is behind the Front Shade. Power supply bracket NOTE : Detaching power unit(circuit) PCB holder PCB holder Push UP CAUTION When re-assembling, tighten this screw at the torque of 0.49±0.1N·m so that the bottom case does not strain. Push Remove the Front Shade UP keep CAUTION The ballast bracket holding the ballast power unit is installed underneath the power supply bracket. Be careful not to injure your fingers or hand by the edges of the ballast bracket during maintenance around the power units. 44 Ballast bracket ED-X10/ED-X12(CC9XM2) 3. Detaching and attaching the Panel Fan Duct assembly When disassembling Remove 4 screws and unhook the panel fan duct assembly as shown in the diagram. Panel fan duct assembly Lamp fan Push each of hooks in the direction of the arrows, while lifting the panel fan duct assembly, when removing it. Tape Thermistor When assembling (1) Put the thermistor in the correct position on the bottom case and fasten its wire with tape as shown in the diagram. (2) Be careful not to put the lamp fan wires between the panel fan duct assembly and the bottom case in attaching the panel fan duct assembly. 45 ED-X10/ED-X12(CC9XM2) 4. Attaching the dichroic optics unit Put the dichroic optics unit on the bottom case, and tighten screws in order of 1, 2, 3 and 4 as shown in the diagram. Some of dichroic optics units have an extra hole shown in the diagram. Don’t attach a screw to this hole. If you tighten it, the optical performance might become worse. Exhaust fan 5. Replacing the exhaust fan Be sure to do the following works before changing the exhaust fan. a. Make sure the contents of the new exhaust fan assembly (P#: GS01321). Exhaust fan …………….1pcs Fan cushion A ………… 2pcs Fan cushion B ………… 1pcs b. Assemble the exhaust fan and fan cushions as described below. 1) Attach the fan guard and the fan bracket to the new exhaust fan using 2 screws. FAN bracket 2) Stick two pieces of the fan cushion A to the corners of the fan. Frame of exhaust fan 0 to 1.0mm Fan cushion A Fan cushion A 3) Stick the Fan cushion B along the top to side of the fan as shown in the diagram. 5 to 15mm Fan cushion B Note: • If you install the new exhaust fan without the fan cushions, the fan vibration in operating might make noise. • Be careful not to invert the fan when assembling the exhaust fan assembly. Fan guard 46 ED-X10/ED-X12(CC9XM2) 9. Replacement Parts list PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components, read carefully, the PRODUCT SAFETY NOTICE of this Service Manual. Don't degrade the safety of the projector through improper servicing. ED-X10 SYMBOL NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 PARTS NO. QD52676 PC06573 QD50836 QD53483 QJ02061 QJ02051 QD50795 PE00112 PH36121 MJ02872 NJ22222 AZ00253 AZ00256 AZ00941 GS01221 GS01232 GS01321 GS01251 UX24913 JP51636 JP51208 EA02263R JP50471 HA01681 HA01691 2722448 GK01354 FH00341 DESCRIPTION CC9-2 UPPER CASE ASS’Y CONT BUTTON ASSY LAMP DOOR ASS’Y CC9-2 BOTTOM CASE ASS’Y FOOT RUBBER ADJUST FOOT FILTER COVER ASS’Y RUBBER FOOT LENS CAP D-SUB SCREW AIR FILTER ASSY S THERMISTOR 250 THERMISTOR 220 THERMISTOR 171 DC FAN TYF400 DC FAN TYF450 CC9 EX FAN ASY DC FAN BM5115 SYMBOL NO. 29 30 31 32 PARTS NO. UX24923 DT00757 CK39802R CK51461R QT49051 HL02221 EV01663 EV01673 EV01683 EW06661 EW08211 NX08061 NX05742 CC9-2D DICHROIC OPTICS UNIT PWB ASS’Y MAIN HED-S PWB ASS’Y REMOTE CPC36 CONNECTOR PWB ASS’Y CONTROL POWER UNIT(BALLAST) POWER UNIT(CIRCUIT) FUSE 6.3A SPEAKER 36M ZH2P 081 THERMAL SW ASSY 47 DESCRIPTION CC9-2D LCD/LENS PRISM ASS’Y(SERVICE or REPAIR) CC9-2D LAMP UNIT ASS’Y EL8302IUZ-T7 SN74LVC1G97DCKR INSTRUCTION MANUAL SASSY REMOTE CONTROL UNIT R001 POWER SUPPLY CORD(US TYPE) W/CORE POWER SUPPLY CORD(EUROPE TYPE) W/CORE POWER SUPPLY CORD(UK TYPE) W/CORE RGB-D CABLE(15PIN MALE TO 15PIN MALE) 3 CONDUCTOR VIDEO/AUDIO CABLE W/CORE COTTON STICK L147 COTTON STICK L70 ED-X10/ED-X12(CC9XM2) ED-X12 SYMBOL NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 PARTS NO. QD52677 PC06572 QD50832 QD53483 QJ02061 QJ02051 QD50795 PE00112 PH36121 MJ02872 NJ22222 AZ00253 AZ00256 AZ00941 GS01221 GS01232 GS01321 GS01251 UX24913 JP51634 JP51208 EA02263R JP50471 HA01681 HA01691 2722448 GK01354 FH00341 DESCRIPTION CC9-2 UPPER CASE ASS’Y CONT BUTTON ASSY LAMP DOOR ASS’Y CC9-2 BOTTOM CASE ASS’Y FOOT RUBBER ADJUST FOOT FILTER COVER ASS’Y RUBBER FOOT LENS CAP D-SUB SCREW AIR FILTER ASSY S THERMISTOR 250 THERMISTOR 220 THERMISTOR 171 DC FAN TYF400 DC FAN TYF450 CC9 EX FAN ASY DC FAN BM5115 SYMBOL NO. 29 30 31 32 PARTS NO. UX24923 DT00757 CK39802R CK51461R QT49051 HL02221 EV01663 EV01673 EV01683 EW06661 EW08211 NX08061 NX05742 DESCRIPTION CC9-2D LCD/LENS PRISM ASS’Y(SERVICE or REPAIR) CC9-2D LAMP UNIT ASS’Y EL8302IUZ-T7 SN74LVC1G97DCKR INSTRUCTION MANUAL SASSY REMOTE CONTROL UNIT R001 POWER SUPPLY CORD(US TYPE) W/CORE POWER SUPPLY CORD(EUROPE TYPE) W/CORE POWER SUPPLY CORD(UK TYPE) W/CORE RGB-D CABLE(15PIN MALE TO 15PIN MALE) 3 CONDUCTOR VIDEO/AUDIO CABLE W/CORE COTTON STICK L147 COTTON STICK L70 CC9-2D DICHROIC OPTICS UNIT PWB ASS’Y MAIN HED12-S PWB ASS’Y REMOTE CPC36 CONNECTOR PWB ASS’Y CONTROL POWER UNIT(BALLAST) POWER UNIT(CIRCUIT) FUSE 6.3A SPEAKER 36M ZH2P 081 THERMAL SW ASSY VIDEO RGB SEARCH AUTO BLANK HOME PAGE UP VOLUME END PAGE DOWN ASPECT MAGNIFY ON OFF Power Cord RGB Cable FREEZE MY BUTTON 1 2 MUTE KEYSTONE MENU POSITION ENTER ESC RESET or Remote Control Instruction manual Audio/Video cable 48 ED-X10/ED-X12(CC9XM2) 10. RS-232C communication 9 5 8 7 3 4 6 2 1 1 RS-232C cable(Cross) CONTROL port of the projector - (1) RD (2) TD (3) - (4) GND (5) - (6) RTS (7) CTS (8) - (9) 2 6 3 7 4 8 5 9 RS-232C port of a computer (1) CD (2) RD (3) TD (4) DTR (5) GND (6) DSR (7) RTS (8) DTS (9) RI Connecting the cable (1) Turn off the projector and the computer power supplies. (2) Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable(Cross). Use the cable that fulfills the specification shown in the previous page. (3) Turn on the computer power supply and after the computer has started up, turn on the projector power supply. Communications setting 19200 bps, 8N1 1. Protocol Consist of header (7 bytes) + Command data (6 bytes) 2. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high CRC_low: Lower byte of CRC flag for command data CRC_high: Upper byte of CRC flag for command data 3. Command Data Command Data Chart byte_0 byte_1 byte_2 Action low byte_3 byte_4 high low Type high low byte_5 Setting code high Action (byte_0 - 1) Action Classification Content 1 Set Change setting to desired value. 2 Get Read projector internal setup value. 4 Increment Increment setup value by 1. 5 Decrement Decrement setup value by 1. 6 Execute Run a command. 49 ED-X10/ED-X12(CC9XM2) Requesting projector status (Get command) (1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+ ‘00H’+‘00H’) from the computer to the projector. (2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer. Changing the projector settings (Set command) (1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector. (2) The projector changes the setting based on the above setting code. (3) The projector returns the response code ‘06H’ to the computer. Using the projector default settings (Reset Command) (1) The computer sends the default setting code Header + Command data (‘06H’+ ‘00H’+ type (2 bytes) + ‘00H’+‘00H’) to the projector. (2) The projector changes the specified setting to the default value. (3) The projector returns the response code ‘06H’ to the computer. Increasing the projector setting value (Increment command) (1) The computer sends the increment code Header + Command data (‘04H’+ ‘00H’+ type (2 bytes) +‘00H’+ ‘00H’) to the projector. (2) The projector in creases the setting value on the above setting code. (3) The projector returns the response code ‘06H’ to the computer. Decreasing the projector setting value (Decrement command) (1) The computer sends the decrement code Header + Command data (‘05H’+ ‘00H’+ type (2 bytes) +‘00H’ + ‘00H’) to the projector. (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code ‘06H’ to the computer. When the projector cannot understand the received command When the projector cannot understand the received command, the error code ‘15H’ is sent back to the computer. Sometimes the projector cannot properly receive the command. In such a case, the command is not executed and the error code ‘15H’ is sent back to the computer. If this error code is returned, send the same command again. When the projector cannot execute the received command. When the projector cannot execute the received command, the error code ‘1cH’ + ‘xxxxH’ is sent back to the computer. When the data length is greater than indicated by the data length code, the projector ignore the excess data code. Conversely when the data length is shorter than indicated by the data length code, an error code will be returned to the computer. NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data. • Provide an interval of at least 40ms between the response code and any other code. • The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data. • Commands are not accepted during warm-up. 50 ED-X10/ED-X12(CC9XM2) Command data chart Names Power Input Source Operation Type Set Set Error Status BRIGHTNESS BRIGHTNESS Reset CONTRAST CONTRAST Reset PICTURE MODE Set GAMMA Set Turn off Turn on Get RGB IN 1 RGB IN 2 VIDEO S-VIDEO COMPONENT Get Get Get Increment Decrement Execute Get Increment Decrement Execute NORMAL CINEMA DYNAMIC BOARD(BLACK) BOARD(GREEN) WHITEBOARD Get #1 DEFAULT #1 CUSTOM #2 DEFAULT #2 CUSTOM #3 DEFAULT #3 CUSTOM #4 DEFAULT #4 CUSTOM #5 DEFAULT #5 CUSTOM Get Header BE EF 03 BE EF 03 BE EF 03 (Example return) 00 00 (Off) BE EF 03 BE EF 03 BE EF 03 BE EF 03 BE EF 03 BE EF 03 BE EF 03 (Example return) 00 00 (Normal) 04 00 (Temp error) 08 00 (Filter error) 06 00 06 00 06 00 06 06 06 06 06 06 06 01 00 (On) 00 00 00 00 00 00 00 CRC Action 2A D3 BA D2 19 D3 01 00 01 00 02 00 FE 3E 6E 9E AE CD D9 D2 D0 D3 D3 D1 D2 D8 02 00 (Cool down) 01 00 01 00 01 00 01 00 01 00 02 00 02 00 Command Data Type Setting Code 00 60 00 60 00 60 00 00 01 00 00 00 00 00 00 00 00 00 20 00 04 01 02 05 00 00 01 00 02 00 (Cover error) (Fan error) 05 00 06 00 (Air flow error) (Lamp time error) 09 00 10 00 (Filter missing error)(Inner Sencer error) 20 20 20 20 20 20 60 03 00 (Lamp error) 07 00 (Cool error) BE EF 03 06 00 89 D2 02 00 03 20 BE EF 03 06 00 EF D2 04 00 03 20 BE EF 03 06 00 3E D3 05 00 03 20 BE EF 03 06 00 58 D3 06 00 00 70 BE EF 03 06 00 FD D3 02 00 04 20 BE EF 03 06 00 9B D3 04 00 04 20 BE EF 03 06 00 4A D2 05 00 04 20 BE EF 03 06 00 A4 D2 06 00 01 70 BE EF 03 06 00 23 F6 01 00 BA 30 BE EF 03 06 00 B3 F7 01 00 BA 30 BE EF 03 06 00 E3 F4 01 00 BA 30 BE EF 03 06 00 E3 EF 01 00 BA 30 BE EF 03 06 00 73 EE 01 00 BA 30 BE EF 03 06 00 83 EE 01 00 BA 30 BE EF 03 06 00 10 F6 02 00 BA 30 (Example return) 00 00 01 00 04 00 10 00 (Normal) (Cinema) (Dynamic) (Custom) 20 00 21 00 22 00 BOARD(BLACK) BOARD(GREEN) (WHITEBOARD) BE EF 03 06 00 07 E9 01 00 A1 30 BE EF 03 06 00 07 FD 01 00 A1 30 BE EF 03 06 00 97 E8 01 00 A1 30 BE EF 03 06 00 97 FC 01 00 A1 30 BE EF 03 06 00 67 E8 01 00 A1 30 BE EF 03 06 00 67 FC 01 00 A1 30 BE EF 03 06 00 F7 E9 01 00 A1 30 BE EF 03 06 00 F7 FD 01 00 A1 30 BE EF 03 06 00 C7 EB 01 00 A1 30 BE EF 03 06 00 C7 FF 01 00 A1 30 BE EF 03 06 00 F4 F0 02 00 A1 30 51 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 04 00 20 00 21 00 22 00 00 00 20 00 10 00 21 00 11 00 22 00 12 00 23 00 13 00 24 00 14 00 00 00 ED-X10/ED-X12(CC9XM2) Names User Gamma Pattern Operation Type Set User Gamma Point 1 User Gamma Point 2 User Gamma Point 3 User Gamma Point 4 User Gamma Point 5 User Gamma Point 6 User Gamma Point 7 User Gamma Point 8 COLOR TEMP Set Off BE EF 03 06 00 CRC Action FB FA 01 00 Command Data Type Setting Code 80 30 00 00 9 step gray scale BE EF 03 06 00 6B FB 01 00 80 30 01 00 15 steps gray scale BE EF 03 06 00 9B FB 01 00 80 30 02 00 Ramp BE EF 03 06 00 0B FA 01 00 80 30 03 00 Get BE EF 03 06 00 C8 FA 02 00 80 30 00 00 Get BE EF 03 06 00 08 FE 02 00 90 30 00 00 Increment BE EF 03 06 00 6E FE 04 00 90 30 00 00 Decrement BE EF 03 06 00 BF FF 05 00 90 30 00 00 Get BE EF 03 06 00 F4 FF 02 00 91 30 00 00 Increment BE EF 03 06 00 92 FF 04 00 91 30 00 00 Decrement BE EF 03 06 00 43 FE 05 00 91 30 00 00 Get BE EF 03 06 00 B0 FF 02 00 92 30 00 00 Increment BE EF 03 06 00 D6 FF 04 00 92 30 00 00 Decrement BE EF 03 06 00 07 FE 05 00 92 30 00 00 Get BE EF 03 06 00 4C FE 02 00 93 30 00 00 Increment BE EF 03 06 00 2A FE 04 00 93 30 00 00 Decrement BE EF 03 06 00 FB FF 05 00 93 30 00 00 Get BE EF 03 06 00 38 FF 02 00 94 30 00 00 Increment BE EF 03 06 00 5E FF 04 00 94 30 00 00 Decrement BE EF 03 06 00 8F FE 05 00 94 30 00 00 Get BE EF 03 06 00 C4 FE 02 00 95 30 00 00 Increment BE EF 03 06 00 A2 FE 04 00 95 30 00 00 Decrement BE EF 03 06 00 73 FF 05 00 95 30 00 00 Get BE EF 03 06 00 80 FE 02 00 96 30 00 00 Increment BE EF 03 06 00 E6 FE 04 00 96 30 00 00 Decrement BE EF 03 06 00 37 FF 05 00 96 30 00 00 Get BE EF 03 06 00 7C FF 02 00 97 30 00 00 Increment BE EF 03 06 00 1A FF 04 00 97 30 00 00 Decrement BE EF 03 06 00 CB FE 05 00 97 30 00 00 LOW BE EF 03 06 00 6B F4 01 00 B0 30 01 00 MIDDLE BE EF 03 06 00 9B F4 01 00 B0 30 02 00 HIGH BE EF 03 06 00 0B F5 01 00 B0 30 03 00 Hi-BRIGHT-1 BE EF 03 06 00 3B F2 01 00 B0 30 08 00 Hi-BRIGHT-2 BE EF 03 06 00 AB F3 01 00 B0 30 09 00 CUSTOM-LOW BE EF 03 06 00 AB F9 01 00 B0 30 11 00 CUSTOM-MID BE EF 03 06 00 5B F9 01 00 B0 30 12 00 CUSTOM-HIGH BE EF 03 06 00 CB F8 01 00 B0 30 13 00 CUSTOM-Hi-BRIGHT-1 BE EF 03 06 00 FB FF 01 00 B0 30 18 00 CUSTOM-Hi-BRIGHT-2 COLOR TEMP GAIN R Header BE EF 03 06 00 6B FE 01 00 B0 30 19 00 Get BE EF 03 06 00 C8 F5 02 00 B0 30 00 00 Get BE EF 03 06 00 34 F4 02 00 B1 30 00 00 Increment BE EF 03 06 00 52 F4 04 00 B1 30 00 00 Decrement BE EF 03 06 00 83 F5 05 00 B1 30 00 00 52 ED-X10/ED-X12(CC9XM2) Names Operation Type COLOR TEMP GAIN G Get BE EF 03 06 00 COLOR TEMP GAIN B COLOR TEMP OFFSET R COLOR TEMP OFFSET G COLOR TEMP OFFSET B COLOR COLOR Reset TINT TINT Reset SHARPNESS SHARPNESS Reset PROGRESSIVE Set Set MY MEMORY Save Set Set CRC Action 70 F4 02 00 B2 30 00 00 Increment BE EF 03 06 00 16 F4 04 00 B2 30 00 00 BE EF 03 06 00 C7 F5 05 00 B2 30 00 00 Get BE EF 03 06 00 8C F5 02 00 B3 30 00 00 Increment BE EF 03 06 00 EA F5 04 00 B3 30 00 00 Decrement BE EF 03 06 00 3B F4 05 00 B3 30 00 00 Get BE EF 03 06 00 04 F5 02 00 B5 30 00 00 Increment BE EF 03 06 00 62 F5 04 00 B5 30 00 00 Decrement BE EF 03 06 00 B3 F4 05 00 B5 30 00 00 Get BE EF 03 06 00 40 F5 02 00 B6 30 00 00 Increment BE EF 03 06 00 26 F5 04 00 B6 30 00 00 Decrement BE EF 03 06 00 F7 F4 05 00 B6 30 00 00 Get BE EF 03 06 00 BC F4 02 00 B7 30 00 00 Increment BE EF 03 06 00 DA F4 04 00 B7 30 00 00 Decrement BE EF 03 06 00 0B F5 05 00 B7 30 00 00 Get BE EF 03 06 00 B5 72 02 00 02 22 00 00 Increment BE EF 03 06 00 D3 72 04 00 02 22 00 00 Decrement BE EF 03 06 00 02 73 05 00 02 22 00 00 Execute BE EF 03 06 00 80 D0 06 00 0A 70 00 00 Get BE EF 03 06 00 49 73 02 00 03 22 00 00 Increment BE EF 03 06 00 2F 73 04 00 03 22 00 00 Decrement BE EF 03 06 00 FE 72 05 00 03 22 00 00 Execute BE EF 03 06 00 7C D1 06 00 0B 70 00 00 Get BE EF 03 06 00 F1 72 02 00 01 22 00 00 Increment BE EF 03 06 00 97 72 04 00 01 22 00 00 Decrement BE EF 03 06 00 46 73 05 00 01 22 00 00 Execute BE EF 03 06 00 C4 D0 06 00 09 70 00 00 BE EF 03 06 00 4A 72 01 00 07 22 00 00 TURN OFF TV BE EF 03 06 00 DA 73 01 00 07 22 01 00 FILM BE EF 03 06 00 2A 73 01 00 07 22 02 00 BE EF 03 06 00 79 72 02 00 07 22 00 00 BE EF 03 06 00 26 72 01 00 06 22 01 00 LOW MIDDLE BE EF 03 06 00 D6 72 01 00 06 22 02 00 HIGH BE EF 03 06 00 46 73 01 00 06 22 03 00 Get MY MEMORY Load Command Data Type Setting Code Decrement Get VIDEO NR Header BE EF 03 06 00 85 73 02 00 06 22 00 00 1 BE EF 03 06 00 0E D7 01 00 14 20 00 00 2 BE EF 03 06 00 9E D6 01 00 14 20 01 00 3 BE EF 03 06 00 6E D6 01 00 14 20 02 00 4 BE EF 03 06 00 FE D7 01 00 14 20 03 00 1 BE EF 03 06 00 F2 D6 01 00 15 20 00 00 2 BE EF 03 06 00 62 D7 01 00 15 20 01 00 3 BE EF 03 06 00 92 D7 01 00 15 20 02 00 4 BE EF 03 06 00 02 D6 01 00 15 20 03 00 53 ED-X10/ED-X12(CC9XM2) Names ASPECT Operation Type Set OVER SCAN OVER SCAN Reset V POSITION V POSITION Reset H POSITION H POSITION Reset H PHASE H SIZE H SIZE Reset AUTO ADJUST COLOR SPACE Set COMPONENT Set C-VIDEO FORMAT Set S-VIDEO FORMAT Set Header CRC Action Command Data Type Setting Code 4:3 16:9 14:9 SMALL NORMAL Get Get Increment Decrement Execute BE BE BE BE BE BE BE BE BE BE EF EF EF EF EF EF EF EF EF EF 03 03 03 03 03 03 03 03 03 03 06 06 06 06 06 06 06 06 06 06 00 00 00 00 00 00 00 00 00 00 9E D0 0E D1 CE D6 FE D1 5E DD AD D0 91 70 F7 70 26 71 EC D9 01 00 01 00 01 00 01 00 01 00 02 00 02 00 04 00 05 00 06 00 08 20 08 20 08 20 08 20 08 20 08 20 09 22 09 22 09 22 27 70 00 00 01 00 09 00 02 00 10 00 00 00 00 00 00 00 00 00 00 00 Get Increment Decrement Execute BE BE BE BE EF EF EF EF 03 03 03 03 06 06 06 06 00 00 00 00 0D 6B BA E0 83 83 82 D2 02 04 05 06 00 00 00 00 00 00 00 02 21 21 21 70 00 00 00 00 00 00 00 00 Get Increment Decrement Execute BE BE BE BE EF EF EF EF 03 03 03 03 06 06 06 06 00 00 00 00 F1 97 46 1C 82 82 83 D3 02 04 05 06 00 00 00 00 01 01 01 03 21 21 21 70 00 00 00 00 00 00 00 00 Get Increment Decrement Get Increment Decrement Execute BE BE BE BE BE BE BE EF EF EF EF EF EF EF 03 03 03 03 03 03 03 06 06 06 06 06 06 06 00 00 00 00 00 00 00 49 2F FE B5 D3 02 68 83 83 82 82 82 83 D2 02 04 05 02 04 05 06 00 00 00 00 00 00 00 03 03 03 02 02 02 04 21 21 21 21 21 21 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Execute BE EF 03 06 00 91 D0 06 00 0A 20 00 00 AUTO RGB SMPTE240 REC709 REC601 Get COMPONENT SCART RGB Get AUTO NTSC PAL SECAM NTSC4.43 M-PAL N-PAL Get AUTO NTSC PAL SECAM NTSC4.43 M-PAL N-PAL Get BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 0E 72 9E 73 6E 73 FE 72 CE 70 3D 72 4A D7 DA D6 79 D7 A2 70 C2 74 52 75 52 70 62 77 C2 71 32 74 31 76 E6 70 86 74 16 75 16 70 26 77 86 71 76 74 75 76 01 01 01 01 01 02 01 01 02 01 01 01 01 01 01 01 02 01 01 01 01 01 01 01 02 04 04 04 04 04 04 17 17 17 11 11 11 11 11 11 11 11 12 12 12 12 12 12 12 12 00 01 02 03 04 00 00 01 00 0A 04 05 09 02 08 07 00 0A 04 05 09 02 08 07 00 EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF 54 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 22 22 22 22 22 22 20 20 20 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ED-X10/ED-X12(CC9XM2) Names Operation Type FRAME LOCK Set TURN OFF TURN ON Get RGB1 IN-1 Set RGB IN-2 Set KEYSTONE V KEYSTONE V Reset WHISPER Set MIRROR Set AUDIO - RGB1 Set AUDIO - RGB2 Set AUDIO - Video Set AUDIO - S-Video Set AUDIO - Component Set Header CRC Action Command Data Type Setting Code BE EF BE EF BE EF 03 03 03 06 00 06 00 06 00 CB D6 5B D7 F8 D6 01 00 01 00 02 00 14 30 14 30 14 30 00 00 01 00 00 00 SYNC ON G OFF SYNC ON G ON Get SYNC ON G OFF SYNC ON G ON Get BE BE BE BE BE BE EF EF EF EF EF EF 03 03 03 03 03 03 06 06 06 06 06 06 00 00 00 00 00 00 5E D7 CE D6 0D D6 A2 D6 32 D7 F1 D7 01 00 01 00 02 00 01 00 01 00 02 00 10 20 10 20 10 20 11 20 11 20 11 20 02 00 03 00 00 00 02 00 03 00 00 00 Get Increment Decrement Execute BRIGHT NORMAL Get NORMAL H:INVERT V:INVERT H&V:INVERT Get TURN OFF Audio1 Audio2 Audio3 Get TURN OFF Audio1 Audio2 Audio3 Get TURN OFF Audio1 Audio2 Audio3 Get TURN OFF Audio1 Audio2 Audio3 Get TURN OFF Audio1 Audio2 Audio3 Get BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF EF 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 B9 D3 DF D3 0E D2 08 D0 3B 23 AB 22 08 23 C7 D2 57 D3 A7 D3 37 D2 F4 D2 FE DD 6E DC 9E DC 0E DD CD DD CE DC 5E DD AE DD 3E DC FD DC 02 DC 92 DD 62 DD F2 DC 31 DC 46 DC D6 DD 26 DD B6 DC 75 DC 32 DD A2 DC 52 DC C2 DD 01 DD 02 00 04 00 05 00 06 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 02 00 07 20 07 20 07 20 0C 70 00 33 00 33 00 33 01 30 01 30 01 30 01 30 01 30 30 20 30 20 30 20 30 20 30 20 34 20 34 20 34 20 34 20 34 20 31 20 31 20 31 20 31 20 31 20 32 20 32 20 32 20 32 20 32 20 35 20 35 20 35 20 35 20 35 20 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 01 00 02 00 03 00 00 00 00 00 01 00 02 00 03 00 00 00 00 00 01 00 02 00 03 00 00 00 00 00 01 00 02 00 03 00 00 00 00 00 01 00 02 00 03 00 00 00 00 00 01 00 02 00 03 00 00 00 55 ED-X10/ED-X12(CC9XM2) Names MUTE LANGUAGE MENU POSITION H MENU POSITION H Reset MENU POSITION V MENU POSITION V Reset Operation Type Set Set Header CRC Action Command Data Type Setting Code TURN OFF BE EF 03 06 00 46 D3 01 00 02 20 00 00 TURN ON BE EF 03 06 00 D6 D2 01 00 02 20 01 00 Get BE EF 03 06 00 75 D3 02 00 02 20 00 00 ENGLISH BE EF 03 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 03 06 00 67 D2 01 00 05 30 01 00 DEUTSCH BE EF 03 06 00 97 D2 01 00 05 30 02 00 ESPAÑOL BE EF 03 06 00 07 D3 01 00 05 30 03 00 ITALIANO BE EF 03 06 00 37 D1 01 00 05 30 04 00 NORSK BE EF 03 06 00 A7 D0 01 00 05 30 05 00 NEDERLANDS BE EF 03 06 00 57 D0 01 00 05 30 06 00 PORTUGUÊS BE EF 03 06 00 C7 D1 01 00 05 30 07 00 BE EF 03 06 00 37 D4 01 00 05 30 08 00 BE EF 03 06 00 A7 D5 01 00 05 30 09 00 BE EF 03 06 00 37 DE 01 00 05 30 10 00 BE EF 03 06 00 57 D5 01 00 05 30 0A 00 SVENSKA BE EF 03 06 00 C7 D4 01 00 05 30 0B 00 PУCCKИЙ BE EF 03 06 00 F7 D6 01 00 05 30 0C 00 SUOMI BE EF 03 06 00 67 D7 01 00 05 30 0D 00 POLSKI BE EF 03 06 00 97 D7 01 00 05 30 0E 00 TÜRKÇE BE EF 03 06 00 07 D6 01 00 05 30 0F 00 Get BE EF 03 06 00 C4 D3 02 00 05 30 00 00 Get BE EF 03 06 00 04 D7 02 00 15 30 00 00 Increment BE EF 03 06 00 62 D7 04 00 15 30 00 00 Decrement BE EF 03 06 00 B3 D6 05 00 15 30 00 00 Execute BE EF 03 06 00 DC C6 06 00 43 70 00 00 Get BE EF 03 06 00 40 D7 02 00 16 30 00 00 Increment BE EF 03 06 00 26 D7 04 00 16 30 00 00 Decrement BE EF 03 06 00 F7 D6 05 00 16 30 00 00 Execute BE EF 03 06 00 A8 C7 06 00 44 70 00 00 56 ED-X10/ED-X12(CC9XM2) Names BLANK Operation Type Set START UP My Screen LOCK MESSAGE AUTO SEARCH AUTO ON AUTO KEYSTONE EXECUTE AUTO KEYSTONE Set Set Set Set Set Set Set AUTO OFF CRC Action Command Data Type Setting Code My Screen BE EF 03 06 00 FB CA 01 00 00 30 20 00 ORIGINAL BE EF 03 06 00 FB E2 01 00 00 30 40 00 BLUE BE EF 03 06 00 CB D3 01 00 00 30 03 00 WHITE BE EF 03 06 00 6B D0 01 00 00 30 05 00 BLACK BLANK On/Off Header BE EF 03 06 00 9B D0 01 00 00 30 06 00 Get BE EF 03 06 00 08 D3 02 00 00 30 00 00 TURN OFF BE EF 03 06 00 FB D8 01 00 20 30 00 00 TURN ON BE EF 03 06 00 6B D9 01 00 20 30 01 00 Get BE EF 03 06 00 C8 D8 02 00 20 30 00 00 My Screen BE EF 03 06 00 CB CB 01 00 04 30 20 00 ORIGINAL BE EF 03 06 00 0B D2 01 00 04 30 00 00 TURN OFF BE EF 03 06 00 9B D3 01 00 04 30 01 00 Get BE EF 03 06 00 38 D2 02 00 04 30 00 00 TURN OFF BE EF 03 06 00 3B EF 01 00 C0 30 00 00 TURN ON BE EF 03 06 00 AB EE 01 00 C0 30 01 00 Get BE EF 03 06 00 08 EF 02 00 C0 30 00 00 TURN OFF BE EF 03 06 00 8F D6 01 00 17 30 00 00 TURN ON BE EF 03 06 00 1F D7 01 00 17 30 01 00 Get BE EF 03 06 00 BC D6 02 00 17 30 00 00 TURN OFF BE EF 03 06 00 B6 D6 01 00 16 20 00 00 TURN ON BE EF 03 06 00 26 D7 01 00 16 20 01 00 Get BE EF 03 06 00 85 D6 02 00 16 20 00 00 TURN OFF BE EF 03 06 00 3B 89 01 00 20 31 00 00 TURN ON BE EF 03 06 00 AB 88 01 00 20 31 01 00 Get BE EF 03 06 00 08 89 02 00 20 31 00 00 Execute BE EF 03 06 00 E5 D1 06 00 0D 20 00 00 BE EF 03 06 00 EA D1 01 00 0F 20 00 00 TURN OFF TURN ON BE EF 03 06 00 7A D0 01 00 0F 20 01 00 Get BE EF 03 06 00 D9 D1 02 00 0F 20 00 00 Get BE EF 03 06 00 08 86 02 00 10 31 00 00 Increment BE EF 03 06 00 6E 86 04 00 10 31 00 00 Decrement BE EF 03 06 00 BF 87 05 00 10 31 00 00 LAMP TIME Get BE EF 03 06 00 C2 FF 02 00 90 10 00 00 LAMP TIME Reset Execute BE EF 03 06 00 58 DC 06 00 30 70 00 00 FILTER TIME Get BE EF 03 06 00 C2 F0 02 00 A0 10 00 00 FILER TIME Reset Execute BE EF 03 06 00 98 C6 06 00 40 70 00 00 MAGNIFY Get BE EF 03 06 00 7C D2 02 00 07 30 00 00 Increment BE EF 03 06 00 1A D2 04 00 07 30 00 00 Decrement BE EF 03 06 00 CB D3 05 00 07 30 00 00 BE EF 03 06 00 83 D2 01 00 02 30 00 00 FREEZE Set NORMAL FREEZE BE EF 03 06 00 13 D3 01 00 02 30 01 00 Get BE EF 03 06 00 B0 D2 02 00 02 30 00 00 57 ED-X10/ED-X12(CC9XM2) Names REMOTE FREQ NORMAL Operation Type Set Set VOLUME-RGB1 VOLUME-RGB2 VOLUME-Video VOLUME-S-Video VOLUME-Component FF 3D 01 00 30 26 00 00 06 00 Enable BE EF 03 06 00 6F 3C 01 00 30 26 01 00 BE EF 03 06 00 CC 3D 02 00 30 26 00 00 Disable BE EF 03 06 00 03 3C 01 00 31 26 00 00 Enable BE EF 03 06 00 93 3D 01 00 31 26 01 00 BE EF 03 06 00 30 3C 02 00 31 26 00 00 RGB1 BE EF 03 06 00 3A 33 01 00 00 36 00 00 RGB2 BE EF 03 06 00 FA 31 01 00 00 36 04 00 COMPONENT BE EF 03 06 00 6A 30 01 00 00 36 05 00 S-VIDEO BE EF 03 06 00 5A 32 01 00 00 36 02 00 Video BE EF 03 06 00 AA 32 01 00 00 36 01 00 INFORMATION BE EF 03 06 00 FA 3E 01 00 00 36 10 00 AUTO KEYSTONE EXECUTE MY MEMORY BE EF 03 06 00 6A 3F 01 00 00 36 11 00 BE EF 03 06 00 9A 3F 01 00 00 36 12 00 PICTURE MODE BE EF 03 06 00 0A 3E 01 00 00 36 13 00 Get Set Action 03 FILTER RESET MY BUTTON-2 CRC BE EF Get MY BUTTON-1 Command Data Type Setting Code Disable Get REMOTE FREQ HIGH Set Header BE EF 03 06 00 3A 3C 01 00 00 36 14 00 BE EF 03 06 00 09 33 02 00 00 36 00 00 RGB1 BE EF 03 06 00 C6 32 01 00 01 36 00 00 RGB2 BE EF 03 06 00 06 30 01 00 01 36 04 00 COMPONENT BE EF 03 06 00 96 31 01 00 01 36 05 00 S-VIDEO BE EF 03 06 00 A6 33 01 00 01 36 02 00 Video BE EF 03 06 00 56 33 01 00 01 36 01 00 INFORMATION BE EF 03 06 00 06 3F 01 00 01 36 10 00 AUTO KEYSTONE EXECUTE MY MEMORY BE EF 03 06 00 96 3E 01 00 01 36 11 00 BE EF 03 06 00 66 3E 01 00 01 36 12 00 PICTURE MODE BE EF 03 06 00 F6 3F 01 00 01 36 13 00 FILTER RESET BE EF 03 06 00 C6 3D 01 00 01 36 14 00 Get BE EF 03 06 00 F5 32 02 00 01 36 00 00 Get BE EF 03 06 00 CD CC 02 00 60 20 00 00 Increment BE EF 03 06 00 AB CC 04 00 60 20 00 00 Decrement BE EF 03 06 00 7A CD 05 00 60 20 00 00 Get BE EF 03 06 00 FD CD 02 00 64 20 00 00 Increment BE EF 03 06 00 9B CD 04 00 64 20 00 00 Decrement BE EF 03 06 00 4A CC 05 00 64 20 00 00 Get BE EF 03 06 00 31 CD 02 00 61 20 00 00 Increment BE EF 03 06 00 57 CD 04 00 61 20 00 00 Decrement BE EF 03 06 00 86 CD 05 00 61 20 00 00 Get BE EF 03 06 00 75 CD 02 00 62 20 00 00 Increment BE EF 03 06 00 13 CD 04 00 62 20 00 00 Decrement BE EF 03 06 00 C2 CC 05 00 62 20 00 00 Get BE EF 03 06 00 01 CC 02 00 65 20 00 00 Increment BE EF 03 06 00 67 CC 04 00 65 20 00 00 Decrement BE EF 03 06 00 B6 CD 05 00 65 20 00 00 58 59 CONTROL PWB CTL USB AC INPUT Audio Out Audio_RGB Audio_RGB Reset SW Audio_Vide L R S-Video Cs Video Component Video DC POWER SUPPLY PWB RS-232C Remote Muse Vol. Cont with SW 6dB AMP RGB in2 RGB out 6dB AMP RGB in1 DDC SP 1W IR RECEIVE REMC PWB AUDIO_AMP 1W TEMP SENSOR Air Block diagram LAMP POWER SUPPLY PWB IR RECEIVE SW outside(duct) SW (Lamp) TEMP SENSOR Lamp OPTICAL UNIT TEMP SENSO PROJECTION LENS Lamp Door SW S/H L3E06150 L/S L3E01060 CONTROL BUTTON DC POWER REGURATOR outside (power unit) COLOR UNIFORMITY, TIMING GENERATOR, GAMMA CORRECTION L3E07110 TEMP SENSO 64K EEPRO A/D converter Video decoder Image_PROCESSOR MAIN CPU PW190 Flash ROM 16Mbit MAIN PWB FAN FAN FAN FAN Lamp sirocco Panel sirocco Exhaust 0.63" XGA LCD PANEL ED-X10/ED-X12(CC9XM2) 11. Block diagram ED-X10/ED-X12(CC9XM2) 12. Connector connection diagram COMPONENT VIDEO-IN EV02 EASP PWB assembly MAIN Y 1 2 SPEAKER OUTOUT+ 1 2 3 4 CNRM GND REMOTE38 +5VST REMOTE57 E002 1 PWB 2 assembly 3 REMC 4 1 2 3 4 FAN1S VCC GND CONT FAN (EXHAUST) 1 2 3 FAN2S VCC GND FAN (R,G PANEL) 1 2 3 FAN3S VC C GND FAN (LAMP) 1 2 3 4 FAN4S VCC GND NC 1 2 E1 VCC OUT 1 2 E2 VCC OUT 1 2 E3 OUT GND Cb/Pb EV01 S-VIDEO -IN VIDEO-IN L AUDIO-IN3 R EA01 AUDIO -IN1 AUDIO -IN2 RGB-IN1 ES01 RESET SW S309 RGB-IN2 ES02 RGB-OUT ES03 EA02 CONTROL ET01 USB ET21 PWB assembly CONTROL LCCOM VDDY DIRY DY CLY /CLY ENBY1 ENBY2 VSSY VSSX N.C. NRG ENBX1 ENBX2 ENBX3 ENBX4 DIRX CLX /CLX DX VDDX VID1 VID2 VID3 VID4 VID5 VID6 VID7 VID8 VID9 VID10 VID11 VID12 MON DY LCCOM 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 E801 E802 E806 E807 E304 ET02 CNC0 EK10 1 USB D- 1 2 USB D+ 2 3 RD/RX 3 4 TD/TX 4 5 GND 5 E301 E302 FAN (B PANEL) TEMP SENSOR (OUTSIDE IN DUCT) TEMP SENSOR (OUTSIDE ON POWER) TEMP SENSOR (INSIDE) S801 LAMP UNIT assembly CN101 OUT+ OUT- 䇭POWER 䇭UNIT 䇭(BALLAST) 1 2 3 4 CNPWR DC IN+ NC D C IN +17V 5 6 7 8 GND 4 GND 3 9 10 11 12 ACTIVE 8 AUDIO.GND 7 +4.1V 1 2 CN102 6 +6.6V 4 5 GND 3 4 +6.6V SILENT 2 3 +17V GND 1 E800 1 2 +15V 4 +15V 3 CNPOW 2 LAMP.MISS CNBAR E804 1 FAN GND LAMP DOOR SW P_ON/OFF AUDIO-OUT E805 LCD PANEL R/G/B P501 P601 P701 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Cr/Pr 9 10 11 12 CN101 1 2 3 4 POWER UNIT (CIRCUIT) CN1 AC INLET Connector connection diagram 60 CN103 SW1 AC SW TSW CNTS LAMP TEMP 1 TEMP OUT 2 TEMP RETURN SWITCH ED-X10/ED-X12(CC9XM2) 13. Basic circuit diagram Parts with hatching are not mounted. CONFIDENTIAL 6 6 5 5 PWB assembly CONTROL (CC9XM2) 4 4 3 3 2 2 1 1 PWB assembly REMOTE (CC9XM2) A B C D 61 E ED-X10/ED-X12(CC9XM2) MEMO 62 CONFIDENTIAL 6 6 5 5 4 4 3 3 2 2 1 1 Warning POWER UNIT (BALLAST) 1 (CC9XM2) For handling of the circuit diagram, refer to the warning on the cover. A B C D E F G CONFIDENTIAL 6 6 5 5 4 4 3 3 2 2 1 1 Warning POWER UNIT (BALLAST) 2 (CC9XM2) For handling of the circuit diagram, refer to the warning on the cover. A B C D E F G CONFIDENTIAL 6 6 5 5 4 4 3 3 2 2 1 1 Warning POWER UNIT (CIRCUIT) (CC9XM2) For handling of the circuit diagram, refer to the warning on the cover. A B C D E F G CONFIDENTIAL CH0B2 CH0B3 CH0B4 CH0B5 CH0B6 CH0B7 CH0B8 CH0B9 CH1CK CH1PE POWER1P1 POWER2P1 POWER3P1 POWER4P1 POWER51 POWER61 1 1 3 5 7 DATA-A CLK-A 1005 RGB_COMP MUTE RGB1/2 RC_EN38 2 4 6 8 2 4 6 8 1 1 R2K6 33 2010 R2K7 33 2010 KEYI0 KEYI1 KEYI2 LAMP-S NO-COVER IN_TEMP WL_DET SBUSY R2F8 7 33 5 2010 3 2 1 R2F0 4 33 6 20108 1 3 5 7 2 4 6 8 3 1 3 5 7 1 3 5 7 R2F9 10K 2010 C8 B7 E11 A6 E10 D8 E9 C7 E8 B6 C8 B7 E11 A6 E10 D8 E9 C7 E8 B6 NC-C8 NC-B7 IN0G2 IN0G3 IN0G4 IN0G5 IN0G6 IN0G7 IN0G8 IN0G9 A5 C6 B5 A4 D7 A3 D6 B4 E7 C5 1 1 1 1 1 1 1 1 R2K8 1 0 2 MOUSE LAMP_POW F_SD/HD NC-A9 NC-D10 IN0R2 IN0R3 IN0R4 IN0R5 IN0R6 IN0R7 IN0R8 IN0R9 1 1 D13 D13 E18 E18 D14 D14 CH0CP CH0CS 8 6 4 1 2 3 5 7 A5 C6 B5 A4 D7 A3 D6 B4 E7 C5 RXD1 TXD1 1005 IN1CLK IN1PEN B1 B1 C2 C2 E5 E5 D3 D3 E4 E4 C1 C1 D2 D2 E3 E3 D1 D1 E2 E2 NC-B1 NC-C2 IN1R2 F4 F3 E1 F2 F5 G3 F1 G2 G5 G1 F4 F3 E1 F2 F5 G3 F1 G2 G5 G1 NC-F4 NC-F3 IN1G2 IN1G3 IN1G4 IN1G5 IN1G6 IN1G7 IN1G8 IN1G9 G4 H3 H2 H1 J4 J3 H4 J2 H5 J1 G4 H3 H2 NC-G4 NC-H3 IN1B2 IN1B3 H1 J4 J3 H4 J2 H5 J1 IN1R3 IN1R4 IN1R5 IN1R6 IN1R7 IN1R8 IN1R9 IN1B4 IN1B5 IN1B6 IN1B7 IN1B8 IN1B9 DATA1 CLK1 CS_TG CS_DAC CS_SH CS_LS 1005 LCONT_IN R2F1 1 100 2 1 CHRXD CHTXD 1 1 1005 R2J2 100 2 CHRX1 CHTX1 1 1 CHIR CHFG1 CHFG2 1 1 1 2 1005 1 3 5 7 D252 SDS511 RESETP KEYO01 KEYO11 LED-LAMP1 LED-TEMP1 2 2 1 R2F3 3 100 5 1 1 2010 7 1 3 5 7 D253 SDS511 LED-P-R LED-P-G GND1 1005 2 R2A0 4 10 2010 6 8 R2F2 1 100 2 1005 1005 2 R2F5 100 R2A2 100 2 R2A6 1 33 2 R2A8 1005 1 33 2 I2CDAT I2CCLK R2F4 100 1 PWRC FAN_FG1 FAN_FG2 R2A7 1 4.7K 2 1005 1 CHTHR 1005 R2A9 1 4.7K 2 NC-A5 NC-C6 IN0B2 IN0B3 IN0B4 IN0B5 IN0B6 IN0B7 IN0B8 IN0B9 K3 K3 K4 K4 R2A1 1 100 2 1005 1 R2J1 1 100 2 1005 1 RXD0 TXD0 R2H1 7 10K 5 FG_SEL1 3 FG_SEL2 1 NW_RST_PW1 ESBUSY1 MSLEEP1 UART_SEL1 8 6 4 2 2010 2 4 6 8 2 4 R2F7 6 33 8 2010 1 3 5 7 2 4 R2J3 6 33 8 2010 OUTTEMPP1 OUTTEMPD1 INTEMP1 AIRSPD1 Used as Port-E GSENSOR CH1C2 CH1C3 CH1C4 CH1C5 CH1C6 CH1C7 1 1 1 1 1 1 CHOTP CHOTD CHITP CHASP CHAD4 1 1 1 1 1 CHAD5 CHAD6 CHAD7 1 1 1 DISPLAY PORT NC-D13 NC-E18 NC-D14 C13 C13 E17 E17 A13 A13 NC-C13 NC-E17 NC-A13 E19 E19 THRWSC E20 E20 B25 B25 RXD0 TXD0 A26 A26 D22 D22 RXD1 TXD1 C24 C24 E21 E21 D23 D23 IRRCVR0 IRRCVR1 IRRCVR2 M1 M2 N6 N1 N5 N2 N3 N4 M1 M2 N6 N1 N5 N2 N3 N4 PORTA0 PORTA1 PORTA2 PORTA3 PORTA4 PORTA5 PORTA6 PORTA7 M3 K2 M4 K1 L4 L1 L2 L3 M3 K2 M4 K1 L4 L1 L2 L3 PORTB0 PORTB1 PORTB2 PORTB3 PORTB4 PORTB5 PORTB6 PORTB7 E15 B12 C12 D12 E14 A11 B11 C11 E15 B12 C12 D12 E14 A11 B11 C11 PORTC0 PORTC1 PORTC2 PORTC3 PORTC4 PORTC5 PORTC6 PORTC7 D24 C26 D25 E24 D24 C26 D25 E24 F23 E22 D26 E25 ADC0 ADC1 ADC2 ADC3 ADC4 ADC5 ADC6 ADC7 F23 E22 D26 E25 I201 PW190 NC-A12 NC-E16 NC-B13 A12 A12 E16 E16 B13 B13 TWOWSC0 TWOWSD0 D20 D20 C22 C22 1 1 CH2C0 CH2D0 TWOWSC1 TWOWSD1 C21 C21 D21 D21 1 1 CH2C1 CH2D1 TWOWSC2 TWOWSD2 D17 D17 C18 C18 1 1 CH2C2 CH2D2 USBVDD USBP USBM USBVSS AB16 AB16 AF19 AF19 AC17 AC17 AC18 AC18 1 1 1 1 CHUSV CHUSP CHUSM CHUSG 1 R2H3 0 2 R2H4 1 3.3K 2 1005 R2H5 1 0 2 1005 USBDP USBDM 1005 PWM0 PWM1 PWM2 PWM3 A10 D11 B10 C10 A10 D11 B10 C10 CHPW0 1 1 1 CHPW1 CHPW2 CHPW3 DCLKOUT DVS DHS DEN C14 C16 D15 C15 C14 C16 D15 C15 DR0 DR1 DR2 DR3 DR4 DR5 DR6 DR7 DR8 DR9 C23 A25 B24 B23 A23 A24 A21 B21 A22 B22 C23 A25 B24 B23 A23 A24 A21 B21 A22 B22 DG0 DG1 DG2 DG3 DG4 DG5 DG6 DG7 DG8 DG9 D19 D18 C20 C19 B20 A20 B19 A19 B18 A18 D19 D18 C20 C19 B20 A20 B19 A19 B18 A18 DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 DB8 DB9 C17 D16 B17 A17 B16 A16 B15 A15 B14 A14 C17 D16 B17 A17 B16 A16 B15 A15 B14 A14 RPIATEST GND1 1 6 I201 PW190 PWM_G R2C4 1 56 2 R2C5 1005 1 33 2 R2C6 1005 1 33 2 1 DCLK DVS DHS 1005 7 8R2E4 5 6150 3 4 2010 21 2 4 R2C7 6150 8 2010 2 4R2C8 6150 8 2010 CHDEN 1 3 5 7 1 3 5 7 7 5 3 1 7 5 3 1 8R2C9 6150 4 2010 7 5 3 1 7 5 3 1 8R2E2 6150 4 2010 7 5 3 1 8R2E5 6150 4 2010 2 2 8R2E1 6150 4 2010 2 2 8R2E3 6150 4 2010 2 DRE0 DRE1 DRE2 DRE3 DRE4 DRE5 DRE6 DRE7 DRE8 DRE9 DGE2 DGE3 DGE4 DGE5 DGE6 DGE7 DGE8 DGE9 DBE2 DBE3 DBE4 DBE5 DBE6 DBE7 DBE8 DBE9 E23 E23 DGE0 DGE1 DBE0 DBE1 GND1 DAC0 DAC1 DAC2 DAC3 H22 E26 F25 J22 H22 E26 F25 J22 1 1 1 1 CHDA0 CHDA1 CHDA2 CHDA3 7 5 3 1 8 R2H2 6 33 4 2010 2 FAN-CNT1 FAN-CNT2 FAN-CNT3 FAN-CNT4 5 4 (EXHAUST FAN) (INSIDE PANEL FAN) (SUB FAN) (OUTSIDE PANEL FAN) Used as Port-F +3.3V Used as Port-G [Input only] 3 1 UART_SEL1 C2A4 0.1/10 210051 I202 SN74LVC1G97DCK ES_RXD1 1005 RC_EN56 VOL_SEL1 A9 D10 B9 A8 E13 C9 E12 B8 D9 A7 A1 A1 B2 B2 LAMP_ON R2K1 1 33 2 R2K2 2 R2K3 1 33 1005 33 2 1005 R2K4 1 33 2 1005 2 1005 4 R2K5 6 33 8 2010 R2H7 1 10K 2 R2H6 1005 1 10K 2 4 1 1 1 1 1 1 1 1 A9 D10 B9 A8 E13 C9 E12 B8 D9 A7 IN0CLP IN0CST C2A1 1 2 CH0G2 CH0G3 CH0G4 CH0G5 CH0G6 CH0G7 CH0G8 CH0G9 IN0CLK IN0PEN IN0VBI IN0AHS IN0HS IN0VS IN0FLD 100p-C 1005 5 1 1 1 1 1 1 1 1 C3 D4 E6 C4 B3 A2 D5 1005 CH0R2 CH0R3 CH0R4 CH0R5 CH0R6 CH0R7 CH0R8 CH0R9 C3 D4 E6 C4 B3 A2 D5 1 1 1 1 1 1 1 PERIPHERALS R2F6 1 10K 2 CH0CK CH0PE CH0VB CH0AH CH0HS CH0VS CH0FL 1 I201 PW190 1005 DIGITAL INPUT PORT R2E6 1 8.2K 2 +3.3VPW 6 RXD1 1 In1 In2 6 2 GND VCC 5 3 In0 Y 4 R2J4 1 100 2 1RXD0 1005 Y=sel(In2, 0:In1/1:In0) R2J5 1 0 2 GND1 1005 2I2031 SN74LVC1G97DCK TXD01 1 In1 In2 6 2 GND VCC 5 3 In0 Y 4 2 1005 2 R2J6 1 10K 2 C2A2 0.1/10 1005 R2J7 1 100 2 1ES_TXD 1005 Y=In2+In0 C2A3 0.1/10 210051 I204 SN74LVC1G97DCK 1 In1 In2 6 2 GND VCC 5 3 In0 Y 4 R2J8 1 100 2 1TXD 1005 Y=Inv(In2)+In1 1 1 R2J9 0 2 1 1005 GND1 PWB assembly MAIN 1 (CC9XM2) A B C D E F G CONFIDENTIAL 6 6 9 52 A13 10 51 A15 A16 1 WRN R269 100 1005 A8 A7 A6 R270 3.3K 2010 A5 49 1005 CHPA0 1 1 GND1 PCS1 RXD NMI 1 48 1 2 A20 0 1005 1 47 15 46 ROMOE 16 45 D15 17 44 D14 18 43 D6 19 42 D13 D5 20 41 D12 D4 21 40 22 39 D11 D3 23 38 D10 D2 24 37 1 25 36 D1 26 35 D0 27 34 28 33 29 32 30 31 1 1 1 R278 0 1005 1PCS0 2 R279 1 2 0 1005 TXD 1LCONT_IN 1EMU-RESET 2 4 VSS SDA 5 R255 1 10K 2 1005 1 GND1 1FLASH_CE CPU-RESET 2 1 A1 +3.3VPW L208 1 600 H2 1608 1 R260 1 100 2 NC-H23 NC-F26 NC-G25 NC-H24 NC-H25 NC-J24 NC-H26 NC-K23 NC-J25 NC-K24 NC-J26 NC-K25 NC-L24 NC-L25 NC-N22 NC-M24 NC-V22 NC-V23 NC-Y26 NC-W24 NC-W23 NC-Y24 NC-AB26 NC-Y23 NC-AA24 NC-AB25 NC-AC26 NC-AA23 NC-AC24 NC-AB23 NC-AD25 NC-AE25 1005 1005 R264 1 4.7K 2 H23 H23 F26 F26 G25 G25 H24 H24 H25 H25 J24 J24 H26 H26 K23 K23 J25 J25 K24 K24 J26 J26 K25 K25 L24 L24 L25 L25 N22 N22 M24 M24 V22 V22 V23 V23 Y26 Y26 W24 W24 W23 W23 Y24 Y24 AB26 AB26 Y23 Y23 AA24 AA24 AB25 AB25 AC26 AC26 AA23 AA23 AC24 AC24 AB23 AB23 AD25 AD25 AE25 AE25 1 I2CCLK 1005 1 I2CDAT 1 1005 R261 1 100 2 W3 W3 I201 PW190 MREFIN0 MREFIN1 R231 1 1.0K 2 L26 L26 V25 V25 MCK MCKN MCKFBK MCKFBKN NC-M26 T26 T25 R23 T22 M26 T26 T25 R23 T22 M26 NC-N25 NC-N24 NC-N23 NC-R24 N25 N24 N23 R24 N25 N24 N23 NC-G26 NC-K26 NC-L22 G26 G26 K26 K26 L22 L22 1 R233 22 2 1 1005 R234 22 2 1005 1 GND1 R24 M22 R25 N26 V26 P22 U24 P23 U25 P24 U22 P25 T23 R26 T24 NC-M22 NC-R25 NC-N26 NC-V26 NC-P22 NC-U24 NC-P23 NC-U25 NC-P24 NC-U22 NC-P25 NC-T23 NC-R26 NC-T24 M22 R25 N26 V26 P22 U24 P23 U25 P24 U22 P25 T23 R26 T24 NC-V24 NC-W26 V24 V24 W26 W26 NC-Y25 NC-AB24 NC-AA26 NC-AC25 Y25 Y25 AB24 AB24 AA26 AA26 AC25 AC25 I201 PW190 AMVSS330 AMVSS331 AMVDD330 AMVDD331 R2 R2 R4 R4 AMVDD18 P3 P3 AVSS33R AVDD331R AVDD33REGR0 AVDD33REGR1 V6 V6 W6 W6 W5 W5 1 C246 2 0.1/10 1 1005 C248 1 2 0.1/10 1005 AVSS33G AVDD331G AVDD33REGG0 AVDD33REGG1 AA1 AA1 AB1 AB1 AB2 AB2 1.0/6.3 1005 AD2 AD2 AVSS33B AVDD331B AVDD33REGB0 AVDD33REGB1 AD4 AD4 AF2 AF2 AF3 AF3 0.1/10 1005 C251 1 2 V4 V4 V2 V2 R6 R6 AVSS181R0 AVSS181R1 AVSSR RREGOUT T6 T6 AVDDR18 U6 U6 AA4 AA4 AA3 AA3 V1 V1 AVSS181G0 AVSS181G1 AVSSG GREGOUT Y4 Y4 AVDDG18 Y5 Y5 AC4 AC4 AC3 AC3 Y7 Y7 AVSS181B0 AVSS181B1 AVSSB BREGOUT Y6 Y6 AVDDB18 AA5 AA5 AE5 AE5 DVSS18P DVDD18P AF4 AF4 AB6 AB6 DVSS18ADC DVDD18ADC AA6 AA6 AB7 AB7 AC5 AC5 VSS_33E1 AVSSP VDD_33E1 AVDDP AA7 AA7 AB5 AB5 AF6 AF6 XVSS XVDD AD7 AD7 G23 G23 DACVSS DACVDD F24 F24 B26 B26 ADCVSS ADCVDD C25 C25 33VSS1 33VSS2 33VSS3 33VSS4 33VSS5 33VSS6 33VSS7 33VSS8 33VSS9 33VSS10 33VSS11 33VSS12 33VSS13 33VSS14 33VSS15 33VSS16 33VSS17 33VSS18 33VDD1 33VDD2 33VDD3 33VDD4 33VDD5 33VDD6 33VDD7 33VDD8 33VDD9 33VDD10 33VDD11 33VDD12 33VDD13 33VDD14 33VDD15 33VDD16 33VDD17 33VDD18 F9 F9 F10 F10 F14 F14 F15 F15 F16 F16 L5 L5 L6 L6 M5 M5 M6 M6 AA10 AA10 AA11 AA11 AA12 AA12 AA16 AA16 AA17 AA17 AA18 AA18 AB10 AB10 AB11 AB11 AB12 AB12 K10 K11 K12 K13 K14 K15 L10 M10 N10 P10 R10 T10 U10 U11 U12 U13 U14 U15 K10 K11 K12 K13 K14 K15 L10 M10 N10 P10 R10 T10 U10 U11 U12 U13 U14 U15 L209 1 600 H2 1608 L210 1 600 H2 1608 2 1 C247 2 0.1/10 1005 L211 600 H 1608 1C2492 AB4 AB4 1005 2 6 A 0 25 1005 7 SCL CE# 26 24 A 1 POWER AND GROUND 2 1 WC E2 R262 1 4.7K 2 E1 3 2 2 R265 820 8 R263 820 VCC C272 1 2 E0 1005 2010 1 0.01/16 1005 I253 M24128-BWMN6 2 4 6 8 R273 0 1005 23 A2 MAIN MEMORY PORT R266 0 1005 R250 0 A3 Vss-27 27 1C2922 1.0/6.3 Vin C291 1 2 Vcont GND 0.1/10 1005 2125 I211 TK11125CSC 2.5V Np Vout TK11118CSC I212 Vin Vout 1.8V +1.8VCPU +3.3V GND1 2 1 3 5 7 RESETN 2 1 22 A3 R291 0 2 R254 1 0 2 1 1 LAMP_ON 1 T2 T2 T4 T4 1 GND1 65mA D7 D8 2 OE# 28 NMI D0 POWER AND GROUND 1 D9 R277 0 1005 21 A4 CS1 AE26 AE26 D8 ROMWE 1 1 R272 0 1005 A2 14 CHPBHN 1 FLASH_CE 1 3 13 A18 R271 DQ0 29 1005 CS0 AD18 AD18 2 50 12 20 A5 1 R215 0 2 D1 R256 0 11 A19 DQ8 30 1 1 R274 1 1.8K 2 DQ1 31 19 A6 1005 1005 A4 A17 18 A7 1005 A14 53 2 4 6 8 NMI D9 C270 1 2 4 8 1 3 5 7 DQ9 32 1 Vcont 54 17 A17 PCS1 D2 1.0/6.3 7 A12 1 2 DQ2 33 GND A10 A18 GND1 16 A18 0.1/10 1005 55 A19 ROMWE AF18 AF18 C298 1 2 6 1 RDN 0.1/10 1005 R232 1 1.0K 2 1 1 R214 1 100 2 D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 C250 1 2 18VSS1 18VSS2 18VSS3 18VSS4 18VSS5 18VSS6 18VSS7 18VSS8 18VSS9 18VSS10 18VSS11 18VSS12 18VSS13 18VSS14 18VSS15 18VSS16 18VSS17 18VSS18 18VSS19 18VSS20 18VSS21 18VSS22 18VSS23 18VSS24 18VSS25 18VSS26 18VSS27 18VSS28 18VSS29 18VSS30 18VSS31 18VDD1 18VDD2 18VDD3 18VDD4 18VDD5 18VDD6 18VDD7 18VDD8 18VDD9 18VDD10 18VDD11 18VDD12 18VDD13 18VDD14 18VDD15 18VDD16 18VDD17 18VDD18 18VDD19 18VDD20 18VDD21 18VDD22 18VDD23 18VDD24 18VDD25 18VDD26 18VDD27 18VDD28 18VDD29 18VDD30 18VDD31 18VDD32 18VDD33 F6 F6 F7 F7 F8 F8 F11 F11 F12 F12 F13 F13 F17 F17 F18 F18 F19 F19 F20 F20 F21 F21 G6 G6 H6 H6 J5 J5 J6 J6 K5 K5 K6 K6 AA9 AA9 AA13 AA13 AA14 AA14 AA15 AA15 AA19 AA19 AA20 AA20 AA21 AA21 AA22 AA22 AB9 AB9 AB13 AB13 AB14 AB14 AB15 AB15 AB19 AB19 AB20 AB20 AB21 AB21 AB22 AB22 AE19 AE19 BPLLVSS BPLLVDD AF20 AF20 0.1/10 1C2412 1005 AB18 AB18 MPLLVSS MPLLVDD AF21 AF21 AB17 AB17 DPLLVSS DPLLVDD AF22 AF22 0.1/10 1005 1 C242 2 0.1/10 1005 AE20 AE20 URESVSS URESVDD AD19 AD19 G24 G24 MDSKVSS MDSKVDD K22 K22 25VSS1 25VSS2 25VSS3 25VSS4 25VSS5 25VSS6 25VSS7 25VSS8 25VSS9 25VSS10 25VSS11 25VSS12 25VSS13 25VSS14 25VSS15 25VSS16 25VSS17 25VSS18 MREFGND0 MREFGND1 C252 1 2 C253 1 2 AFE_ADC_REF C254 1 2 L212 1 600 H2 1608 0.1/10 1005 C255 1 2 0.1/10 1005 1 1 C258 1 0.1/10 1005 L213 1 600 H2 1608 L214 1 600 H2 1608 2 1 C256 2 0.1/10 1005 2 C257 2 0.1/10 1005 L215 600 H 1608 1C2612 1C2622 1.0/6.3 1C2632 1.0/6.3 1005 1.0/6.3 1005 1C2642 1005 1C2652 0.1/10 1C2662 0.1/10 1005 0.1/10 1005 1C2672 1005 1C2682 0.1/10 1C2692 0.1/10 1005 0.1/10 1005 1005 CHV33 1 C260 10/6.3 2125 C259 22/6.3 MVK/SKV 1C2032 F22 F22 G21 G21 G22 G22 H21 H21 J21 J21 K21 K21 L21 L21 M21 M21 N21 N21 P21 P21 R21 R21 T21 T21 U21 U21 V21 V21 W21 W21 W22 W22 Y21 Y21 Y22 Y22 AD26 AD26 AA25 AA25 W25 W25 U26 U26 P26 P26 M25 M25 L23 L23 J23 J23 R22 R22 K17 L16 L17 M15 M16 M17 N15 N16 N17 P15 P16 P17 R15 R16 R17 T16 T17 U17 M23 M23 U23 U23 0.1/10 1005 75mA 25VDD1 25VDD2 25VDD3 25VDD4 25VDD5 25VDD6 25VDD7 25VDD8 25VDD9 25VDD10 25VDD11 25VDD12 25VDD13 25VDD14 25VDD15 25VDD16 25VDD17 25VDD18 25VDD19 25VDD20 25VDD21 25VDD22 25VDD23 25VDD24 25VDD25 25VDD26 25VDD27 K17 L16 L17 M15 M16 M17 N15 N16 N17 P15 P16 P17 R15 R16 R17 T16 T17 U17 0.1/10 1005 0.1/10 1005 I201 PW190 G7 G20 K16 L11 L12 L13 L14 L15 M11 M12 M13 M14 N11 N12 N13 N14 P11 P12 P13 P14 R11 R12 R13 R14 T11 T12 T13 T14 T15 U16 Y20 G7 G20 K16 L11 L12 L13 L14 L15 M11 M12 M13 M14 N11 N12 N13 N14 P11 P12 P13 P14 R11 R12 R13 R14 T11 T12 T13 T14 T15 U16 Y20 1C2042 1.0/6.3 1C2052 1.0/6.3 1005 1C2062 0.1/10 1005 1005 1C2072 0.1/10 1C2082 0.1/10 1005 1C2092 0.1/10 1005 1005 1C2102 0.1/10 1C2112 0.1/10 1005 1C2122 0.1/10 1005 1005 1C2132 0.1/10 1C2142 0.1/10 1005 1C2152 0.1/10 1005 1005 1C2162 0.1/10 0.1/10 1005 4 L201 1 600 H2 1608 C201 22/6.3 MVK/SKV 1005 3 L202 C1V222-2A 3216 1 3 2 C217 22/6.3 MVK/SKV 1350mA CHV25 1 C220 1 2 1C2212 1.0/6.3 1.0/6.3 1005 C223 1005 1 2 1.0/6.3 C224 1005 1 2 1.0/6.3 1C2252 0.1/10 1005 1005 1C2262 0.1/10 1005 1C2272 0.1/10 1C2282 0.1/10 1005 1005 1C2292 0.1/10 1005 1C2302 0.1/10 1C2312 0.1/10 1005 1005 1C2322 0.1/10 1005 1C2332 0.1/10 1C2342 0.1/10 1005 1005 1C2352 0.1/10 1005 1C2362 0.1/10 1C2222 0.1/10 1005 1005 2 C237 1 2 1.0/6.3 C238 1005 1 2 1.0/6.3 1005 1C2392 1.0/6.3 1005 C240 1 2 CHV18 1 L203 1 600 H2 L204 1608 600 H 2 1 1608 L206 1 600 H2 1608 1 C243 2 1 GND1 1 A11 2 1005 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 2 A8 R213 1 100 2 1 20107 1 R2233 33 5 20107 1 R2243 33 5 20107 1 R2253 33 5 20107 10/6.3 2125 1 2 56 PCS0 D10 DQ10 34 1 R2223 33 5 AE24 D0 AC23 D1 AD24 D2 AE23 D3 AF26 D4 AC22 D5 AD23 D6 AE22 D7 AF25 D8 AE21 D9 AD22 D10 AC21 D11 AF24 D12 AF23 D13 AD20 D14 AD21 D15 Np 5 D3 DQ3 35 15 RY/BY# 5 CHA21 CHA22 CHA23 CHVSS A9 14 NC-14 1005 R268 100 1005 ROMOE AE17 AE17 20107 1 1 1 1 A7 WR AC19 AC19 1 A5 57 DQ11 36 AF17 AF17 1 58 4 13 NC-13 2 4 6 8 20107 AF12 AF12 AC9 AC9 AD10 AD10 AE24 AC23 AD24 AE23 AF26 AC22 AD23 AE22 AF25 AE21 AD22 AC21 AF24 AF23 AD20 AD21 RD 2 3 R253 1 10K 2 1 R2123 33 5 1 1 D11 2 A6 RDN WRN 35mA 1005 A3 AD16 AD16 D4 C271 0.01/16 110052 A21 A22 A23 1 59 Vcc 37 2010 20107 1 R2213 33 5 2 2 12 RESET# TESTMODE0 TESTMODE1 TESTMODE2 VSS 3 A4 DQ4 38 AB8 AA8 AF8 AF7 D12 DQ12 39 11 WE# AB8 AA8 AF8 AF7 D5 DQ5 40 10 NC-10 2 4 6 8 10/6.3 2125 A19 D6 D13 R211 0 1C2952 9 1 3 5 7 20107 1 R2203 33 5 C202 1 2 2 A20 1005 DQ13 41 1 R267 0 DQ6 42 A8 2 R228 1 10K 1005 D14 EXTINT0 EXTINT1 5 A9 8 1005 20107 1 R2193 33 5 4 7 A9 D7 2 R209 1 0 1005 R208 0 2 RESETB EXTRSTEN ADR24B TRSTN EXTMCLK 10/6.3 2125 DQ14 43 1 1 EXTINT 1 AE10 AE10 AD9 AD9 AF10 AF10 AD8 AD8 R210 AC20 2 AC20 0 1005 AD17 AD17 CHEX2 1AE18 AE18 +4.1V 10/6.3 2125 C218 1 2 DQ7 44 A10 D15 L216 2 1 600 H 1608 1005 20107 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 1 A11 6 A1 60 DQ15/A-1 45 5 GND1 E251 WR-60S-VF1-1 1 Vss-46 46 A12 A11 1 A2 A13 4 1 R206 1.0K 1005 2 1 2 R207 1 10K 1005 1 R2183 33 5 2 1 3 A12 A10 +5V BYTE# 47 TMS TDO TDI TCK 3 5 A16 48 A14 AF9 AE9 AE8 AC8 2.5V A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 10/6.3 2125 A13 A15 2 AF9 AE9 AE8 AC8 2 4 6 8 2125 A14 1 2 4 6 8 20107 1005 1 R2173 33 5 C219 1 2 A15 1 R201 3 0 5 1005 A16 C273 1 2 0.01/16 1005 R205 1 0 2 1 AC15 AC15 AE16 AE16 AF16 AF16 AC16 AC16 AD15 AD15 AE15 AE15 AC14 AC14 AF15 AF15 AD14 AD14 AC12 AC12 AE14 AE14 AC13 AC13 AF14 AF14 AD13 AD13 AE13 AE13 AF13 AF13 AC10 AC10 AC11 AC11 AD12 AD12 AE12 AE12 5 EMU-RESET A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 TEA1 TEA2 TEA3 TEA4 TEA5 4 Q201 1005 DTC114EUA R204 2 0 1 1005 2 3 A17 I251 S29AL016D70TFI010 R203 1 1.0K 2 I201 PW190 CPU C296 1 2 R202 0 1005 2 65mA 2 R200 0 1005 C294 10/6.3 1 2 1 1 2 4 6 8 R227 1 33 2 C293 1 2 RESETN 1 R2263 33 5 20107 C297 10/6.3 1 2 L251 600 H 1608 2 1 1 D0 D1 D2 D3 D4 D5 D6 D7 R216 1 10K 2 D0 D1 D2 D3 D4 D5 D6 D7 1C2442 0.1/10 1005 L205 1 600 H2 1608 L207 1 600 H2 1608 0.1/10 1C2452 1005 1.0/6.3 1005 1 1 1 GND1 PWB assembly MAIN 2 (CC9XM2) A B C D E F G DATA2 VDD 3 GND 1 5 VCC 5 3 In0 Y 4 5 Y 4 KEYI1 G1 G2 G2 2 1 1005 KEYO0 I311 SN74LVC1G126DCK KEYO1 C390 1 2 1 OE 2 A Vcc GND 3 GND1 KEYI2 Y 5 R319 0 2 1 4 AP324 4 AP325 5 AP326 6 AP327 7 AP328 8 AP329 9 AP330 10 1608 AP331 11 AP332 12 1 1 LED POW-R 1 LED TEMP LED LAMP 1 GND KEYI0 R318 1 100 2 3 LED POW-G KEYI-0 1 1005 2 R3A5 0 1005 1 C392 0.01/16 1005 2 3 0.1/10 1005 R3A4 1 100 2 10/6.3 2125 A 5 C312 0.01/16 1005 GND 4 2 2 G1 R3A0 1 100 2 2 NC Vcc 1005 1 1005 6 1005 C391 1 2 2 1 R3A1 1 100 2 C377 1 2 C374 1 2 In2 R375 0 0.33/10 In1 1 0.01/16 1005 1 2 Cd 1005 I391 SN74LVC1G97DCK 3 1005 OUT 1 2 R371 1 220 2 1 1005 Q372 SRC1202EF 2 0 1005 S309 SKHHLMA010 OE 2 AP323 KEYI-1 KEYI-2 KEYO-0 KEYO-1 GND +3.3V 1 R379 1 100 2 1 R373 2 C376 0.01/16 1005 1005 D-RESET R3A6 1 10K 2 I301 RN5VD26C 1005 1 AP322 1 L322 1608 600 H 2 1 L323 1608 600 H 2 1 L324 1608 600 H 2 1 L325 1608 600 H 2 1 L326 1608 600 H 2 1 L327 1608 600 H 2 1 L328 1608 600 H 2 1 L329 1608 600 H 2 1 L330 1608 600 H 2 1 L331 1608 600 H 2 1 I310 SN74LVC1G126DCK 1005 R3A2 1 10K 2 2 0 1005 1 R377 2 1 R376 1 220 2 CPU-RESET R372 0 1005 R378 1 10K 2 2 1 C371 10/10 2125 1 1 1005 E3W1 ZH-12V AP321 1 L321 600 H 2 1 1005 2518 RESETN 2 For "N" "WL" model R317 0 2 1 1 L371 100 H 2 1 +3.3V 1 1 1005 +6.6V 6 R316 0 2 1 1 R3A3 0 CLK2 CLK1 POWER5 CS_DAC DATA1 6 CONFIDENTIAL POWER 1005 C313 0.01/16 Q303 DTA114YKA +5V 2 1 1005 1 LED-P-G LED-P-R LED-TEMP LED-LAMP GND1 1005 3 2 +3.3V 1 R309 0 2 LAMP-S 5 OUTTEMPD 3 Q313 SRC1202EF OUTTEMPP TEMP INTEMP D302 3 LAMP Q314 SRC1202EF 3 1005 8 6 4 2 X0 12 D312 SDS142WKF 1 1 KEYI0 KEYI1 KEYI2 KEYO0 4 4 3 2 3 4 2 4 2 1 C316 100p-C 1005 2 3 2 1 C322 100p-C 1005 1 1 2 2 1 4 3 1 2 3 4 2 1 4 3 1 2 3 4 2 4 1C3292 100p-C 1005 4 2 1 C326 100p-C 1005 2 3 2 1 C324 100p-C 1005 1 LEFT S303 SKRAAAE010 2 1 C328 100p-C 1005 DOWN S306 SKRAAAE010 1C3272 100p-C 1005 RIGHT S305 SKRAAAE010 D POWER1 POWER3 POWER2 POWER4 1005 POWER5 POWER6 1R311 RGB1/2 1 RGB_COMP R312 1.0K-1% 1005 2 1 CHK302 TEMP_SEL2 1 GND1 R310 6.8k-1% 1005 1 2 PWB assembly MAIN 3 (CC9XM2) MUTE C 3 2 1 C320 100p-C 1005 10 D6/A10 11 D5/A11 12 D4/A12 3 1 3 5 7 1005 LAMP_POW B 4 1 KEYO1 2010 2 4 6 8 R305 100 2010 TEMP_SEL1 IN_TEMP 1005 1 A 7 5 3 1 2010 TEMP_REF 1005 F_SD/HD GND1 R363 1 6.8K 2 4 2 0 2 R365 1 1.0K 2 R380 1 6.8K 2 2 3 1 R301 10K 8 6 4 2 1 1005 1 S304 SKRAAAE010 S302 SKRAAAE010 2 2 1 C321 100p-C 1005 VDD 13 D3 15 Vcc 14 D7/A9 9 D1 17 D8/A8 8 D2 16 D9/A7 7 D0 18 D10/A6 6 CLK 19 D11/A5 S0 21 A4 4 5 SI 20 EN 22 A3 3 GND 24 3 1005 R349 13.3K-1%2 2 4 6 8 1005 R306 100 R347 0 2 1 3 5 7 1005 0.1/16 0.1/25 R350 122K-1%2 1 2010 5 C352 1 2 2 4 6 8 2IN+ 1005 TEMP_SEL3 R307 100 GND 6 R392 2680-1%1 1 3 5 7 4 2IN- 2 1005 FAN-CNT1 FAN-CNT2 FAN-CNT3 FAN-CNT4 1IN+ 7 R314 1100K-1%2 1 Q353 2SA1980UFG 0.1/10 1005 3 R359 1 100 23 1005 RESET 23 4 C303 1 2 2OUT 1IN- 8 A2 OUT 1005 2 VCC 1OUT R348 11.5K-1%2 1 2 5 I305 M62376GP-60AD +IN A1 GND 3 1 2 V+ 1005 -IN R313 110K-1%2 1 2 1 1005 R358 1.0K 1005 3216 R354 15.1K-1%2 I333 LM358AD C353 1 2 10/10 2125 C355 1 2 1 R352 0 2 L352 600 H 2 1 1608 1005 1608 R355 13.3K-1%2 2 4 6 8 1 3 5 7 AP352 1 R353 270 AP351 1 1005 I322 NJM2406F 1005 0 ohm R 2 R369 1 100 2 3 R357 12.0K-1%2 1005 2 1 100/10 MVK/SKV 2 Q352 2SB1132 1 C354 1 C351 10/10 2125 R356 1 1.0K 2 UP INPUT S301 SKRAAAE010 2 1 C323 100p-C 1005 D311 SDS142WKF 2 1 C317 100p-C 1005 POW 3 D310 SDS142WKF 1 1C3252 100p-C 1005 2 2 R303 100 C302 0.01/16 1005 1005 R362 1 10K 2 1 1 1005 R351 13.3K-1%2 1005 2 7 5 3 1 2010 8 6 4 2 C301 0.01/16 1005 2 R388 13.3K-1%2 R360 13.3K-1%2 D313 SDS142WKF R304 10K 3 1005 1005 1 R391 4.7K 9 C364 1 2 2 R385 1 3.3K 2 3 10 3 C 11 1 VSS B 2 8 A 3 VEE 2 INH 7 R345 1 1.0K 2 2 R390 10K 1005 6 7 5 3 1 2010 0.1/10 1005 1005 2 X1 13 Z0 1 R368 8.2K 5 1 FAN+15V 2 2 1 R381 10K 14 2010 Z 15 2 4 6 8 4 X 1 L351 600 H 2 1 2 R320 1 220 2 1005 1 R321 100 1005 1 3 5 7 1005 Y Z1 1005 1005 R361 10K 1 3 AIR_TEMP 1 4 POWER1P VDD 16 POWER3P Y0 POWER2P POWER4P Y1 2 R366 1 3.3K 2 AIRSPD E302 ZH-02H 2 3 2 1 1005 2 2 3 2 1 R387 8.2K 0.001 1005 C384 1 2 C362 1 2 C386 1 2 0.001 1005 1 1608 AIR SPEED SENSOR (1K) 2 1 2 1005 1 R386 10K C383 1 2 0.001 1005 0.001 1005 C361 1 2 C385 1 2 2 L385 600 H 2 1 5 1 1005 L386 600 H 2 1 1608 R300 4.7K 4 D301 GREEN Q312 SRC1202EF R389 1 3.3K 2 1608 0.001 1005 D305 1 2 L362 600 H 2 1 UDZ2.0B AP386 1 D304 1 2 AP385 1 3 IN-SIDE SENSOR on PWB (4.7K) UDZ2.0B 1608 2 1005 1005 I323 SN74LV4053APW 0.001 1005 AP361 1 R384 1 3.3K 2 L361 600 H 2 1 1 OUT-SIDE SENSOR on Power (10K) 1 E301 ZH-02H 1608 1 RED SML-020MVT86 AP362 D315 1 2 L383 600 H 2 1 UDZ2.0B D314 1 2 2 UDZ2.0B 1608 R323 2 330 1 SML-210VT AP383 AP384 1 L384 600 H 2 1 1 E304 ZH-02H OUT-SIDE SENSOR in Duct (10K) 1 4 1005 D303 2 1 Q311 SRC1202EF 0 ohm R R322 2 330 1 1 2 1 2 SML-210VT E F G Y R8H5 15K-1% 1005 5 3 GND 2 D813 UDZ2.0B 1 C839 1 2 10/6.3 2125 1 1 EXHAUST (In1) 1 OUT_PNL (In0) SELECTOR 5 In1 In2 6 2 GND VCC 5 3 In0 Y 4 1005 1005 In0 3 1 Y 4 AP-FG VCC R8F1 1 100 2 R8A1 1 100 2 1 GND 6 In2 I834 (FAN_FG1) 1005 0 SUB (In1) 1 IN_PNL (In0) FAN_FG1 R8F3 1 100 2 1 AP-FG2 2 In2 4 CH-FG In1 Y I831 SN74LVC1G97DCK 1 1 1005 4 I834 SN74LVC1G97DCK 1 CH-FG2 1 2 0 1005 FAN_FG2 1 1 FAN4S L822 2600 H 2125 2 VCC 2 3 GND NC GND Vout ADJ 4 5 21 1 3 GND 2 R882 22K 1005 APF1 1 2 2 3 2 4 FAN1S VCC GND CONT 2 POWER3 Vout ADJ Vc Vin GND Vout ADJ 2 3 4 5 0 ohm R R887 10K 1005 1 10/6.3 2125 1 2 R8K5 15K-1% 1005 2 1 C8K2 100/16 MVK/SKV C876 1 2 2 1 L832 2 600 H 2125 2 (INSIDE PANEL FAN) E802 ZH-03H 1 2 3 FAN2S VCC GND L833 600 H 2125 FAN-CNT2 1 2 2 2 1 SDS511 1 1 R873 1.0K C873 0.01/16 1005 1005 D871 0.1/25 2 R877 1 22K-1% 1005 C874 1 2 R8K6 0 1005 1 1 2 1 R8K3 R8K2 15K-1% 15K-1% 1005 1005 R876 2.7K-1% 1005 1R8K1 10K 1005 2 2 21 C872 0.1/25 2 1 L831 600 H 1 1608 2 APF5 1 GND 1 APF6 1 Vin 5 APF7 1 Vc 4 2 2 GND 4 1IN- 1IN+ 3 2 1 (EXHAUST FAN) E801 ZH-04H 1 1 1 5 2IN+ R874 10K 1005 6 2IN- 3 2 1 2 7 2OUT 1005 1 R870 1 100 2 3 8 VCC 2 R8K4 15K-1% 1005 1005 R838 1 10K 2 (EXHAUST FAN) L828 2 600 H 2125 L830 600 H 1608 I871 SI-3010KM 1 2 5 APF2 1 L827 600 H 1 1608 2 APF3 1 2 1 1 2 C891 4.7/16 2125 APF4 1 1 C855 100/16 MVK/SKV (INSIDE PANEL FAN) 1 6 2IN+ 3 LAMP_POW AIR_TEMP OUTTEMPD POWER2 R810 2.2K 1005 FAN-CNT1 (EXHAUST FAN) 2 R880 1 0 1005 Q808 SRC1202EF C875 100/16 MVK/SKV (INSIDE PANEL FAN) C892 4.7/16 2125 1 PWB assembly MAIN 4 (CC9XM2) GND1 B C D 3 0 ohm R I8K1 SI-3010KM C8K1 0.1/25 1 2 2IN- GND 1 2 FAN-CNT3 (SUB FAN) 1 2R875 1 15K-1% 1005 1IN+ 4 1 APF14 VCC 1 22K-1% 1005 2 3 1 APF13 2 2 R857 1 1 7 1OUT 1 2OUT 1005 C842 100/16 MVK/SKV 2 R872 1 100 1005 2 1005 1 1IN- R878 2.7K-1% 1005 1 2 2 R879 15K-1% 8 FAN3S L825 2600 H 2125 Q871 2SD1760 I872 LM358AD 1 VCC 1 1OUT 2 1 C845 0.1/25 2125 1005 R839 0 2 1 R843 1 1.0K 2 1 1 2 1 0.1/25-F 1 1 1 L826 600 H 2125 D851 C854 0.1/25 1 2 2 2 C853 0.01/16 1005 R871 100 1005 (SUB FAN) E806 ZH-03H 2 1 SDS511 R8J6 0 R853 1005 1.0K 1005 1 2 10/6.3 2125 1 C856 1 2 4 R855 15K-1% 1005 GND 3 2 1IN- 1IN+ 2 R856 2.7K-1% 1005 R859 R858 2.7K-1% 2 15K-1% 1 1005 2 1005 APF12 R885 10K 1005 APF9 1 Vin 3 1 2 APF10 1 2 R881 22K 1005 Vc 5 2IN+ 1 1 2 C852 0.1/25 FAN-CNT4 (OUTSIDE PANEL FAN) POWER4 L824 600 H 1 1608 2 1 6 2 R852 1 100 1005 2 7 2OUT 2IN- 1 1005 2 R850 1 100 2 3 R851 100 1005 8 R886 0 1 1005 2 (SUB FAN) Q851 2SD1760 APF11 1 1 2 I851 SI-3010KM LAMP_ON A 4 (OUTSIDE PANEL FAN) E807 ZH-03H 2 Q805 SRC1202EF 1 2 I842 LM358AD 2 2 R840 21 R841 2 R849 100K 1005 1 3 1 1 C841 1 2 3 2 R842 10K-1% 22K-1% 2.7K-1% 1005 1005 1005 (R842+R841+R840)/R842*1V=12.85V 1 D841 2 1 SDS511 2 R837 100 1005 2 1 1 2 3 Q807 DTA114YKA C871 0.1/25 1 2 C843 0.1/25 1 2 2 ADJ 5 2 12 R847 1 R848 8.2K-1% 5.6K-1% 1005 1005 Vout 3 2 R846 100 1005 GND 4 R844 12K-1% 1005 2 1 H 1608 H 1608 I833 (FAN_FG2) In2 AP-FS1 B L821 600 H 1 1608 2 12 C893 4.7/16 2125 R845 0 1 1005 2 Vin 3 C844 0.01-F 1005 1 2 Vc 2 2 L812 600 2 L813 600 2 L814 600 H 1608 1 C828 47/6.3 MVK/SKV 10/6.3 2125 AP-FS2 2 5 R8A7 1 100 2 Y R8A9 1 100 2 In0 3 R8J5 15K-1% 1005 VCC C851 0.1/25 1 2 1 C865 100/16 MVK/SKV 2 1 C864 0.1/25 1 2 2 1 C863 0.01/16 1005 1 1 R802 3.3K 1005 Q806 DTA114YKA 1 R805 2 1.0K 1005 R807 100 1 1005 2 2 1 C805 0.01-F 1005 2 2 1 2 C806 0.01-F 1005 1 1 4 2 C837 1 2 10/6.3 2125 C838 1 2 10/6.3 2125 C836 1 2 10/6.3 2125 ADJ R833 680-1% 1005 C835 1 2 2 R831 10K-1% 1005 2 Vcc 1005 2 2 1OUT ADJ 2 1 R8H6 0 R863 2 R867 1 1005 1.0K 22K-1% 1 1005 2 1005 R869 R868 2.7K-1% 15K-1% 2 1 1005 2 1005 1 Vout C866 1 2 10/6.3 2125 2 1 SDS511 R808 100 Q804 DTA114YKA 1 C807 0.01-F 1005 3 1 A L829 600 1H 2125 1 Q803 SRC1202EF 1 L811 600 H 1608 2 1 1 APN4 C827 680p R832 1 2 12K-1% 1005 1 1005 21 2 1 2 1 C832 1 2 C834 1 2 10/10 2125 10/10 2125 1 VCC 1 1005 I852 LM358AD GND 2 1005 1 Vin 5 R884 10K Vc 2 2 R866 2.7K-1% 1005 R865 15K-1% 1005 GND 4 4 D861 1 1IN+ 3 3 1 2 1IN2 2 C862 0.1/25 1 1OUT 1 1 R864 10K 1005 1 5 2IN+ 2 R862 1 100 1005 I841 SI-3010KM 2 R806 0 1005 APN3 1 APN2 1 2 1 1 2 MVK/SKV C833 1 2 C824 10/6.3 220/6.3 2125 1 2 C822 MVK/SKV 47/10 2 1 C825 SELECTOR GND R8F2 1 100 2 1 2 3 APS2 APS1 1 G2 G1 1 D812 SFPB-66 VO 1005 1 2 1005 2 C8A2 0.01/16 I832 1005 SN74LVC1G86DCK 1 2 G2 G1 1 APN1 1 LAMP MISS R8C2 1 100 2 R8C1 1005 1 100 2 R8A8 1 100 2 6 C8J2 100/16 MVK/SKV 2 21 2 R883 22K 1005 2 1005 2IN- 1 7 6 2OUT I862 LM358AD 8 R861 100 1005 Q802 DTA114YKA 1 1 R804 2 100 1005 1 R803 2 100K 1005 SILENT MODE In2 R800 0 1005 2 1005 1 NO-COVER GND In1 1 1 R801 3.9K 1005 1 P_ON/OFF/CNT 2 GND 2 R826 30K-1% 1005 C8A1 0.01/16 I833 1005 SN74LVC1G97DCK 2 E804 SH-04H 5 1 2 2 3 LAMP-S R830 10 1005 VCC R824 1.2K-1% 211005 2 5 I861 SI-3010KM 1 2 Q861 2SD1760 R860 1 100 2 3 1 C804 0.01-F 1005 1 2 1 2 APP7 1 2 L801 600 H 1608 POWER1 LAMP_COVER_SW 1.0/10 680p 1005 CTL 1005 2C8261 1.0/10 1 R825 18K-1% 2 1 1 1 2 C803 100/6.3 MVK/SKV 2 VCC C861 0.1/25 1 2 7 5 3 1 2010 R893 10K 8 6 4 2 C802 47/10 MVK/SKV APP4 1 APP3 1 APP2 1 APP1 1 GND1 1 A_GND SPPB620300 C840 1 2 G2 L805 C1V222-2A 3216 1 3 2 1 FAN+15POW S801 FB G1 BOOST G1 1 2 C800 47/25 MVK/SKV 1 3 2 L804 C1V222-2A 3216 12 GND R8A5 1 47K 2 R8A3 1 100 2 R8J3 R8J2 15K-1% 15K-1% 1005 1005 2 1005 1 R8J1 10K C8H2 100/16 MVK/SKV 2 1 R8H3 R8H2 15K-1% 15K-1% 1005 1005 2 21 1 4 11 ACTIVE SE GND 1.8V-CPU R8E7 100 1 1005 2 10 GND AVIN 1.8V-CPU +1.8VCPU L823 600 H1 2125 7 5 3 1 2010 9 R828 1 100 2 ADJ 4 2 GND 8 6 4 2 Audio_GND PVIN 2 D810 SFPB-66 1 1005 R8J4 15K-1% 1005 B 3 1 8 47/6.3 MVK/SKV Np 3 C831 1 2 R8A6 10K 2010 2 4 6 8 3 Vout GND Vin Vc 2 C8J1 0.1/25 1 2 2 2 +4.1V R892 10K 7 C801 47/25 1 2 MVK/SKV 6 +6.6V APGND 1 1005 +6.6V R891 1 10K 2 GND 5 L803 C1V222-2A 3216 1 3 2 1005 4 L802 C1V222-2A 3216 1 3 2 R890 1 10K 2 +17V 10/6.3 2125 C821 1 2 C830 1 2 R823 30K-1% 1005 1 1 4 R8E4 100 1 1005 2 APP5 1 3 APP6 1 2 R829 0 2 1005 R8A4 1 100 2 (OUTSIDE PANEL FAN) FAN GND 1005 I807 TPS40222DR 1 2 1 ADJ 5 R8H4 15K-1% 1005 Y 5 2 GND GND1 +15V 5 I8J1 SI-3010KM 4 1 B 3 DATA-A FAN+15V +6.6V +17V +4.1V 1 4 1 3 5 7 3 C8H1 0.1/25 1 2 2 Vcc A 1 2 R8E5 1 100 1005 R8E2 1005 100 1 R8E3 100 1005 210051 2 R8E6 100 1 1005 2 5 C881 0.01/16 1 Vcc A 1 2 2 2 1005 1 R8H1 10K I822 SN74LVC1G08DCK I821 SN74LVC1G08DCK +15V 3 1005 DATA1 E800 PH-12H +1.2V 1.2V-TG +5V 4 Vout 5 Vin GND 2 I805 TK11150CSC Vcont C 1 2 1 C820 1.0/10 0.001-C +3.3V 100/6.3 MVK/SKV 1005 1005 R822 147K-1%2 C818 0.33/10 2 1 100/6.3 MVK/SKV 1 2 C817 1 2 GND OUT C VCC R821 12.2K-1%2 OUT 1005 +6.6V +3.3VP GND CTL VCC 1005 CTL 2 1 R816 100 1005 1 1005 CLK-A 2 1 1 R8R2 0 2 1 0 ohm R CLK1 1 1 1 1005 5 R8A2 1 100 2 Vin 1 AP15 AP13 1 4 L816 4.7 H SLF6028 2 C823 0.033/16 1 2 1005 L806 600 H 1608 R8E1 1 100 2 VOL_SEL 1 3 I8H1 SI-3010KM Vout 2 1 2 2 1.2V-TG 1005 H 2L807 600 1 1608 2 1 GND 3 1 6 I808 BD00KA5WFP-E2 R854 10K 1005 1 4 3 4 3.3V-CPU 5V L810 600 H 1608 2 1 L808 600 H 1608 2 1 VCC REMOTE1 (38KHz) I803 BA00BC0WFP FG_SEL2 FG_SEL1 Vc REMOTE2 (56.9KHz) 2 1 0.01/16 1005 GND E805 ZH-04H L809 600 H 1608 2 1 1 AP16 AP14 R8R1 0 2 5 1005 2 C895 C819 4 1005 R820 30K-1% 1005 Y AND 1 In0 R818 12.2K-1%2 3 C814 0.1/16-F 1005 R819 2 147K-1%2 R896 1 100 2 1005 4 2 5 Y 5 2 VCC OR 4 10K 1005 1 5 3 R817 6 VCC 2 1 In2 GND C813 0.1/10 1 2 In0 In1 2 C811 2 GND 3 1 6 1 R815 39K 1 1005 2 C812 1 2 I891 SN74LVC1G97DCK 1 2 ADJ 2 1005 1 I893 SN74LVC1G97DCK In2 R811 100 1005 2 1 0.01/16 1005 In1 5 47/16 MVK/SKV R897 1 100 2 Vout 4 C896 4 1005 Y OR 3 1005 In0 2 3.3V-Panel ROHM Reg R814 2.2K-1% 1005 3 1 Vin 5 GND VCC R812 127K-1%2 GND R813 14.7K-1%2 2 0.1/25-F 6 1005 In2 R895 1 100 2 In1 Vc I892 SN74LVC1G97DCK 1 I802 BA00BC0WFP (R820+R819+R818)/R820*1.25V=3.30V (R814+R813+R812)/R814*1V=15.41V RC_EN56 1 POWER6 +15.5V POWER5 15.5V-Panel 6 I801 SI-3010KM RC_EN38 5 PWRC 6 CONFIDENTIAL 1 Q809 2SC5343UFG 4 1 G1 2 R835 1 22K 1005 2 3 2 R836 10K 1 1005 2 MOUSE 3 RMT E F G CONFIDENTIAL 6 +1.2V L401 10 H 2518 I401 L3E07110K0A 1 2 1 1 L402 2.2 H 2518 C421 2.2/6.3 1 2 C422 0.01/16 1005 1 2 C423 0.01/16 1005 1 2 C424 0.01/16 1005 2 C425 0.01/16 1005 1 2 C426 0.01/16 1005 1 2 5 1 2 C427 0.01/16 1005 1 2 C428 2.2/6.3 1 2 C402 2.2/6.3 1 2 C403 0.01/16 1005 1 2 C404 0.01/16 1005 1 2 C405 0.01/16 1005 1 2 4 C406 0.01/16 1005 1 2 C407 0.01/16 1005 1 2 C408 1005 0.01/16 1 2 C409 1005 0.01/16 1 2 C410 0.01/16 1005 1 2 R431 0 1005 2 C411 2.2/6.3 C401 220/6.3 MVK/SKV 1 2 1 2 2 1 1 3 5 5 7 3 1 7 2 4 6 6 8 4 2 8 CHTDI CHTMS R444 1 0 1005 2 1 1 1 2C4411 R439 0 1005 R440 0 1005 1 1 2 R438 0 1005 2 1 1 CH413 1 CH414 CH415 1 1 AP413 1 CHTDO R441 100 1005 1 1 1 2 R436 100K 2010 1 2 C442 33/10 MVK/SKV R435 0 1005 0.1/10 1005 R434 100 1005 2 2 1 AP414 1 2 R437 100K 2010 AP415 R430 10K 1005 AP412 AP411 1 AP410 1 CH412 1 CH411 1 1 C443 1 2 1 5.0p-C 1005 CLK2 1 CS_TG 1 DATA2 1 RESETP 1 R433 100 1 1005 2 CH410 1 3 1 R432 47K 1005 DHS DVS DCLK 6 L3E07110K0A 1/4 2 C420 220/6.3 MVK/SKV 1 2 +3.3VP 1 D7 D8 D9 D10 D11 D12 D13 E7 E8 E9 E10 E11 E12 E13 T8 T9 T10 T11 T12 T13 T14 U8 U9 U10 U11 U12 U13 U14 D7 D8 D9 D10 D11 D12 D13 E7 E8 E9 E10 E11 E12 E13 T8 T9 T10 T11 T12 T13 T14 U8 U9 U10 U11 U12 U13 U14 VDD1-D7 VDD1-D8 VDD1-D9 VDD1-D10 VDD1-D11 VDD1-D12 VDD1-D13 VDD1-E7 VDD1-E8 VDD1-E9 VDD1-E10 VDD1-E11 VDD1-E12 VDD1-E13 VDD1-T8 VDD1-T9 VDD1-T10 VDD1-T11 VDD1-T12 VDD1-T13 VDD1-T14 VDD1-U8 VDD1-U9 VDD1-U10 VDD1-U11 VDD1-U12 VDD1-U13 VDD1-U14 C5 C14 D19 G3 G16 G17 H4 H5 H16 H17 J4 J5 J16 J17 K4 K5 K16 K17 L4 L5 L16 L17 M4 M5 M16 M17 N4 N5 N16 N17 P4 P5 P18 U2 V7 W17 C5 C14 D19 G3 G16 G17 H4 H5 H16 H17 J4 J5 J16 J17 K4 K5 K16 K17 L4 L5 L16 L17 M4 M5 M16 M17 N4 N5 N16 N17 P4 P5 P18 U2 V7 W17 VDD2-C5 VDD2-C14 VDD2-D19 VDD2-G3 VDD2-G16 VDD2-G17 VDD2-H4 VDD2-H5 VDD2-H16 VDD2-H17 VDD2-J4 VDD2-J5 VDD2-J16 VDD2-J17 VDD2-K4 VDD2-K5 VDD2-K16 VDD2-K17 VDD2-L4 VDD2-L5 VDD2-L16 VDD2-L17 VDD2-M4 VDD2-M5 VDD2-M16 VDD2-M17 VDD2-N4 VDD2-N5 VDD2-N16 VDD2-N17 VDD2-P4 VDD2-P5 VDD2-P18 VDD2-U2 VDD2-V7 VDD2-W17 A6 H1 C19 B18 D18 V17 V4 E2 G1 H3 G2 A19 A20 B20 E20 H2 A7 A5 B5 B6 C6 B7 C7 B4 C4 D3 E3 F3 A1 A2 E1 B2 2 B3 D1 D2 1 F1 F2 A6 H1 C19 B18 D18 V17 V4 E2 G1 H3 G2 A19 A20 B20 E20 H2 A7 A5 B5 B6 C6 B7 C7 B4 C4 D3 E3 F3 A1 A2 E1 B2 B3 D1 D2 F1 F2 SELECT VSEL TEST1 TEST2 TEST3 TEST4 TEST5 TEST6 TEST7 TEST8 TEST9 SCLK SCS SDATA RESET EN OSDSW OSDRIN0 OSDRIN1 OSDGIN0 OSDGIN1 OSDBIN0 OSDBIN1 TDI TMS TCK TRST TDO HSYNC VSYNC DCLK HSI HSO PLI PLO VDDP GNDP O O O O O O O O HRESET0 A3 A3 VRESET0 A4 A4 HPLL B1 B1 CLP1 C1 C1 CLP2 C2 C2 SHENB D20 D20 NRG C20 C20 DIRY B19 B19 1 1 1 1 1 1 CHHRST CHVRST CHHPLL CHCP1 CHCP2 R442 47 CHSHE 1 1005 2 1 I401 L3E07110K0A NRG 1 CHDIRY L3E07110K0A 2/4 +1.2V +3.3V I I I I I I I I I I I I I I I I I I I I I I I I I I I O I I I I O I O GND-C3 GND-C18 GND-D4 GND-D5 GND-D6 GND-D14 GND-D15 GND-D16 GND-D17 GND-E4 GND-E5 GND-E6 GND-E14 GND-E15 GND-E16 GND-E17 GND-F4 GND-F5 GND-F6 GND-F14 GND-F15 GND-F16 GND-F17 GND-G4 GND-G5 GND-G6 GND-J9 GND-J10 GND-J11 GND-J12 GND-K9 GND-K10 GND-K11 GND-K12 GND-L9 GND-L10 GND-L11 GND-L12 GND-M9 GND-M10 GND-M11 GND-M12 GND-P15 GND-P16 GND-P17 GND-R4 GND-R5 GND-R6 GND-R7 GND-R15 GND-R16 GND-R17 GND-T4 GND-T5 GND-T6 GND-T7 GND-T15 GND-T16 GND-T17 GND-U4 GND-U5 GND-U6 GND-U7 GND-U15 GND-U16 GND-U17 GND-V3 GND-V18 C3 C18 D4 D5 D6 D14 D15 D16 D17 E4 E5 E6 E14 E15 E16 E17 F4 F5 F6 F14 F15 F16 F17 G4 G5 G6 J9 J10 J11 J12 K9 K10 K11 K12 L9 L10 L11 L12 M9 M10 M11 M12 P15 P16 P17 R4 R5 R6 R7 R15 R16 R17 T4 T5 T6 T7 T15 T16 T17 U4 U5 U6 U7 U15 U16 U17 V3 V18 C3 C18 D4 D5 D6 D14 D15 D16 D17 E4 E5 E6 E14 E15 E16 E17 F4 F5 F6 F14 F15 F16 F17 G4 G5 G6 J9 J10 J11 J12 K9 K10 K11 K12 L9 L10 L11 L12 M9 M10 M11 M12 P15 P16 P17 R4 R5 R6 R7 R15 R16 R17 T4 T5 T6 T7 T15 T16 T17 U4 U5 U6 U7 U15 U16 U17 V3 V18 DRE0 DRE1 DRE2 DRE3 DRE4 DRE5 DRE6 DRE7 DRE8 DRE9 1 1 1 1 1 1 1 1 1 1 C11 A10 B10 C10 A9 B9 C9 A8 B8 C8 C11 A10 B10 C10 A9 B9 C9 A8 B8 C8 RIN0 RIN1 RIN2 RIN3 RIN4 RIN5 RIN6 RIN7 RIN8 RIN9 I I I I I I I I I I O O O O O O O O O O R1OUT0 R1OUT1 R1OUT2 R1OUT3 R1OUT4 R1OUT5 R1OUT6 R1OUT7 R1OUT8 R1OUT9 M3 L1 L2 L3 K1 K2 K3 J1 J2 J3 M3 L1 L2 L3 K1 K2 K3 J1 J2 J3 O O O O O O O O O O R2OUT0 R2OUT1 R2OUT2 R2OUT3 R2OUT4 R2OUT5 R2OUT6 R2OUT7 R2OUT8 R2OUT9 R2 R3 P1 P2 P3 N1 N2 N3 M1 M2 R2 R3 P1 P2 P3 N1 N2 N3 M1 M2 R1 U1 T3 T2 T1 U3 V5 W5 Y5 Y4 W4 Y3 Y2 W2 W3 V1 V2 Y1 W1 R1 U1 T3 T2 T1 U3 V5 W5 Y5 Y4 W4 Y3 Y2 W2 W3 V1 V2 Y1 W1 O O O O O O O O O O O O O O O O O O O DGE0 DGE1 DGE2 DGE3 DGE4 DGE5 DGE6 DGE7 DGE8 DGE9 +1.2V 1 1 1 1 1 1 1 1 1 1 A14 B14 A13 B13 C13 A12 B12 C12 A11 B11 SHCLKR SHCLKRN XFRR STSQER STSQOR FRPR DIRXR DIRXRN ENBX1R ENBX2R ENBX3R ENBX4R ENBX5R DXOUTR CLXOUTR ENBY1R ENBY2R DYOUTR CLYOUTR 7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1 1RD1-0 1RD1-1 1RD1-2 1RD1-3 1RD1-4 1RD1-5 1RD1-6 1RD1-7 1RD1-8 1RD1-9 8R401 6150 4 2010 2 8R402 6150 4 2010 2 8R403 6150 4 2010 2 5 1RD2-0 1RD2-1 1RD2-2 1RD2-3 1RD2-4 1RD2-5 1RD2-6 1RD2-7 1RD2-8 1RD2-9 8R404 6150 4 2010 2 8R405 6150 4 2010 2 1 1 1 CHSQER 1 CHENNR 1 1 1 CHEN2R CHEN3R CHEN4R 1 3 5 7 R425 56 2 1SHCLKR 1005 CHCKNR 1 3 5 7 2 4R406 656 8 2010 1XFRR 1 CHSQOR 1FRPR 1DIRXR 1 3 5 7 2 4R407 656 8 2010 1ENBXR1 1ENBXR5 1DXOUTR 1CLXOUTR 1ENBYR1 1ENBYR2 1DYOUTR 1CLYOUTR H401 SC020JT 2125 1 3 2 4 2 4R408 656 8 2010 I401 L3E07110K0A I401 L3E07110K0A L3E07110K0A 3/4 L3E07110K0A 4/4 A14 B14 A13 B13 C13 A12 B12 C12 A11 B11 GIN0 GIN1 GIN2 GIN3 GIN4 GIN5 GIN6 GIN7 GIN8 GIN9 I I I I I I I I I I O O O O O O O O O O G1OUT0 G1OUT1 G1OUT2 G1OUT3 G1OUT4 G1OUT5 G1OUT6 G1OUT7 G1OUT8 G1OUT9 W9 V9 Y8 W8 V8 Y7 W7 Y6 W6 V6 W9 V9 Y8 W8 V8 Y7 W7 Y6 W6 V6 O O O O O O O O O O G2OUT0 G2OUT1 G2OUT2 G2OUT3 G2OUT4 G2OUT5 G2OUT6 G2OUT7 G2OUT8 G2OUT9 Y12 W12 V12 Y11 W11 V11 Y10 W10 V10 Y9 Y12 W12 V12 Y11 W11 V11 Y10 W10 V10 Y9 O O O O O O O O O O O O O O O O O O O SHCLKG SHCLKGN XFRG STSQEG STSQOG FRPG DIRXG DIRXGN ENBX1G ENBX2G ENBX3G ENBX4G ENBX5G DXOUTG CLXOUTG ENBY1G ENBY2G DYOUTG CLYOUTG V13 Y14 W13 Y13 V14 W14 W20 W19 Y20 Y19 Y18 W18 Y17 Y16 W16 W15 V15 V16 Y15 V13 Y14 W13 Y13 V14 W14 W20 W19 Y20 Y19 Y18 W18 Y17 Y16 W16 W15 V15 V16 Y15 1 7 5 3 1 7 5 3 1 7 5 3 1 8R409 6150 4 2010 2 8R410 7 5 3 1 7 5 3 1 8R412 6150 4 2010 2 8R413 1GD1-0 1GD1-1 1GD1-2 1GD1-3 1GD1-4 1GD1-5 1GD1-6 1GD1-7 1GD1-8 1GD1-9 6150 4 2010 2 8R411 6150 4 2010 2 1GD2-0 1GD2-1 1GD2-2 1GD2-3 1GD2-4 1GD2-5 1GD2-6 1GD2-7 1GD2-8 1GD2-9 6150 4 2010 2 CHSQEG 1 CHENNG 1 1 1 CHEN2G CHEN3G CHEN4G 1 3 5 7 R426 1 56 2 1 1 1 1 1 1 1 1 1 1 A18 A17 B17 C17 A16 B16 C16 A15 B15 C15 A18 A17 B17 C17 A16 B16 C16 A15 B15 C15 BIN0 BIN1 BIN2 BIN3 BIN4 BIN5 BIN6 BIN7 BIN8 BIN9 I I I I I I I I I I 1SHCLKG 1005 CHCKNG 1 DBE0 DBE1 DBE2 DBE3 DBE4 DBE5 DBE6 DBE7 DBE8 DBE9 1 3 5 7 1 3 5 7 2 4R416 656 8 2010 2 4R414 656 8 2010 2 4R415 656 8 2010 1XFRG 1 CHSQOG 1FRPG 1DIRXG H402 SC020JT 2125 1 3 2 1ENBXG1 1ENBXG5 1DXOUTG 1CLXOUTG 1ENBYG1 1ENBYG2 1DYOUTG 1CLYOUTG O O O O O O O O O O B1OUT0 B1OUT1 B1OUT2 B1OUT3 B1OUT4 B1OUT5 B1OUT6 B1OUT7 B1OUT8 B1OUT9 R19 R18 T20 T19 T18 U20 U19 U18 V20 V19 R19 R18 T20 T19 T18 U20 U19 U18 V20 V19 O O O O O O O O O O B2OUT0 B2OUT1 B2OUT2 B2OUT3 B2OUT4 B2OUT5 B2OUT6 B2OUT7 B2OUT8 B2OUT9 L18 M20 M19 M18 N20 N19 N18 P20 P19 R20 L18 M20 M19 M18 N20 N19 N18 P20 P19 R20 O O O O O O O O O O O O O O O O O O O SHCLKB SHCLKBN XFRB STSQEB STSQOB FRPB DIRXB DIRXBN ENBX1B ENBX2B ENBX3B ENBX4B ENBX5B DXOUTB CLXOUTB ENBY1B ENBY2B DYOUTB CLYOUTB L19 J18 L20 K18 K19 K20 E18 E19 F20 F19 F18 G20 G19 G18 H20 J20 J19 H19 H18 L19 J18 L20 K18 K19 K20 E18 E19 F20 F19 F18 G20 G19 G18 H20 J20 J19 H19 H18 7 5 3 1 7 5 3 1 7 5 3 1 8R417 6150 4 2010 2 8R418 7 5 3 1 7 5 3 1 8R420 6150 4 2010 2 8R421 3 1BD1-0 1BD1-1 1BD1-2 1BD1-3 1BD1-4 1BD1-5 1BD1-6 1BD1-7 1BD1-8 1BD1-9 6150 4 2010 2 8R419 6150 4 2010 2 1BD2-0 1BD2-1 1BD2-2 1BD2-3 1BD2-4 1BD2-5 1BD2-6 1BD2-7 1BD2-8 1BD2-9 6150 4 2010 2 1 1 1 CHSQEB 1 CHENNB 1 1 1 CHEN2B CHEN3B CHEN4B 1 3 5 7 R427 56 2 1SHCLKB 1005 CHCKNB 1 3 5 7 2 4R422 656 8 2010 1XFRB 1 CHSQOB 1FRPB 1DIRXB 1 3 5 7 2 4R423 656 8 2010 1ENBXB1 1ENBXB5 1DXOUTB 1CLXOUTB 1ENBYB1 1ENBYB2 1DYOUTB 1CLYOUTB 2 4R424 656 8 2010 H403 SC020JT 2125 1 3 2 1 2 1 1 GND1 PWB assembly MAIN 5 (CC9XM2) A B C D E F G CONFIDENTIAL CC9XM2 R Panel Part 6 6 +3.3VP 96 D2N6 97 D2N7 98 D2N8 99 D2N9 100 VDD-100 2 1 C513 0.1/25 2 3 4 1 ENBYR2 1 5 6 7 8 9 1 2 2 APR17 RDX 32 31 30 29 APR16 C5202 1 0.1/25 1 3 5 7 28 27 26 C5192 1 0.1/25 2 4 6 8 RVID9 RVID10 RVID11 RVID12 APR14 RVID2 R532 10 2010 APR13 RVID3 APR12 RVID4 APR10 APR9 RVID7 APR8 1 RVID8 APR7 RVID9 2 2 2 CHMDR 2 1 APR6 RVID10 APR5 RVID11 APR4 RVID12 1 1 APR3 C517 0.1/25 1 C515 5.0p-C 1005 APR15 RVID1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 R/CLX 1 C5212 1 0.1/25 RVID6 C516 1.0/16 GND1 APR18 RVID5 2 R524 0 1005 1 2 33 RDIRX APR11 DXOUTR DYOUTR RESETP CS_SH CLK2 DATA2 1 2 C514 0.1/25 R521 0 1005 R523 0 1005 1 2 C506 1 0.1/25 2 34 APR20 RCLX 36 35 RENBX4 APR19 37 10 1 1 1 2 1 3 1 4 15 16 17 18 1 9 2 0 2 1 2 2 2 3 2 4 25 2 ENBYR1 R520 0 1005 R522 0 1005 2 2 R506 100K 1005 1 1 38 APR21 RMON APR2 RDY GND1 APR1 1 2 1 R507 100 2010 C522 2 1 0.1/25 RENBX3 RVID5 RVID6 RVID7 RVID8 1 95 D2N5 39 2010 2 4 6 8 1 94 D2N4 40 APR22 1 93 D2N3 42 41 APR23 RENBX2 R533 10 1 3 5 7 1 92 D2N2 C5232 1 0.1/25 1 91 D2N1 43 APR24 RENBX1 1 90 D2N0 44 RNRG 1 89 DGND-89 RD2-0 RD2-1 RD2-2 RD2-3 RD2-4 RD2-5 RD2-6 RD2-7 RD2-8 RD2-9 45 RVID1 RVID2 RVID3 RVID4 1 RENBX3 RENBX2 RENBX1 RDIRX I502 L3E06150S2A 88 DGND-88 RMON 46 2010 2 4 6 8 APR25 1 86 D1N9 C524 0.1/25 APR26 1005 1 85 D1N8 47 R534 10 1 3 5 7 2 1 84 D1N7 48 1 1 83 D1N6 49 1 82 D1N5 50 R550 1 0 2 1 VDD-75 VDD-74 DGND-73 DGND-72 DGND-71 XFRIN SHCLK INVIN R/L SHT_O SHT_I AGND-64 AGND-63 AGND-62 AGND-61 AGND-60 VCC-59 VCC-58 PGND-57 CAL_IN PVCC-55 CAL_OUT PGND-53 PGND-52 PGND-51 81 D1N4 2 1 MVK/SKV 2 7 5 3 1 80 D1N3 APR27 1 8 6 4 2 7 5 3 20101 79 D1N2 C518 0.1/25 8 6 4 2 78 D1N1 87 DGND-87 RDX R/CLX RCLX RENBX4 C525 22/16 R531 011005 R508 100 VID1 PVCC-49 VID2 PGND-47 VID3 PVCC-45 VID4 PGND-43 VID5 PVCC-41 VID6 PGND-39 PGND-38 PGND-37 VID7 PVCC-35 VID8 PGND-33 VID9 PVCC-31 VID10 PGND-29 VID11 PVCC-27 VID12 APR28 2 R530 1.0K 1005 C507 0.1/25 RENBY2 P501 54104-36HUp 1 C527 0.001 2 2 1 1 C526 0.1/25 C528 0.1/25 2 1 C529 0.1/25 2 R535 1 1005 2 0 1 APR29 77 D1N0 1005 1 R504 100 2010 1 2 3 4 6 5 8 7 1 2 R505 3 4 6 100 5 8 2010 7 C505 0.001 2 1 2 RENBY1 R525 1 2 0 1005 1 2 R526 1 2 1005 220 R527 1 2 0 1005 1 2 R528 R529 0 1005 0 1005 XRES A11 A10 TS DYIN CLYIN ENBY1I ENBY2I HRGIN DVDD GND-38 AVDD 23 C504 0.1/25 APR31 VDD-1 DGND-2 DGND-3 TEST POWSV RESET SCS SCLK SDATA ADDR0 DXIN DYIN ENBY AGND-14 AGND-15 AGND-16 AGND-17 REF_IN VCC-19 REF_OUT AGND-21 LCCOM VCC-23 PGND-24 PGND-25 2 R509 100 1 1005 2 24 22 21 20 19 18 17 13 16 15 14 2R503 0 1005 1 HVDD-13 DIRY DY CLY CLY ENBY1 ENBY2 NRG GND-21 HVDD-22 IREF GND-24 I501 L3E01060P0A RCLY R/CLY 2 1 C509 0.1/25 2 R510 0 2 1005 1 2 2 1 1 R511 0 2 1005 1 R512 0 1005 10 11 12 GND-36 MON HVDD-34 DX CLX CLX ENBX5 ENBX4 ENBX3 ENBX2 ENBX1 DIRX 2 1 22/16 MVK/SKV 36 35 34 33 32 31 30 29 28 27 26 25 9 2 1 C503 0.1/25 SCS SCLK SDATA DIVS DXIN CLXIN ENBX5I ENBX1IN GND-9 CLK GND-11 PVDD APR32 76 VDD-76 RD1-0 RD1-1 RD1-2 RD1-3 RD1-4 RD1-5 RD1-6 RD1-7 RD1-8 RD1-9 C508 37 38 39 40 41 42 8 3 43 7 R502 0 1005 44 6 2 45 5 SHCLKR 4 DXOUTR CLXOUTR ENBXR5 1 ENBXR1 47 3 R501 220 1005 46 2 2 1 APR33 RDY 75 7 4 7 3 72 7 1 7 0 6 9 68 6 7 6 6 6 5 6 4 6 3 62 61 60 59 58 57 56 55 54 53 52 51 C512 0.1/25 1 2 48 1 CS_LS CLK2 DATA2 APR34 RDIRY APR30 2 C502 5.0p-C 1005 1 2 2518 R536 0 1005 R539 0 1005 1 R538 1 0 1005 1 2 APR35 1 C510 0.1/25 DYOUTR CLYOUTR ENBYR1 ENBYR2 NRG RESETP 2 1 22/6.3 MVK/SKV 1 1 L504 10 H 2 1 APR36 RLCCOM C511 C501 22/6.3 MVK/SKV L503 22 H 2518 XFRR SHCLKR FRPR DIRXR 2 2 R537 02 1 1005 2 2518 L502 22 H 1 2518 L501 22 H 2 0 ohm R 1 0 ohm R R513 0 1005 4 SHCLKR DIRXR ENBXR1 ENBXR5 DXOUTR CLXOUTR DYOUTR CLYOUTR ENBYR1 ENBYR2 NRG XFRR FRPR RESETP RD1-0 RD1-1 RD1-2 RD1-3 RD1-4 RD1-5 RD1-6 RD1-7 RD1-8 RD1-9 RD2-0 RD2-1 RD2-2 RD2-3 RD2-4 RD2-5 RD2-6 RD2-7 RD2-8 RD2-9 CS_SH CS_LS CLK2 DATA2 1 5 SHCLKR DIRXR ENBXR1 ENBXR5 DXOUTR CLXOUTR DYOUTR CLYOUTR ENBYR1 ENBYR2 NRG XFRR FRPR RESETP RD1-0 RD1-1 RD1-2 RD1-3 RD1-4 RD1-5 RD1-6 RD1-7 RD1-8 RD1-9 RD2-0 RD2-1 RD2-2 RD2-3 RD2-4 RD2-5 RD2-6 RD2-7 RD2-8 RD2-9 CS_SH CS_LS CLK2 DATA2 XFRR +15.5V 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 R551 47K 1005 LCCOM 5 VDDY DIRY DY CLY /CLY ENBY1 ENBY2 VSSY VSSX N.C. NRG 4 ENBX1 ENBX2 ENBX3 ENBX4 DIRX CLX /CLX DX VDDX VID1 3 VID2 VID3 VID4 VID5 VID6 VID7 VID8 VID9 VID10 VID11 VID12 2 MON DY LCCOM C530 RLCCOM RDIRY RDY RCLY R/CLY RENBY1 RENBY2 RNRG 1.0/25-F 2125 C531 1 2 0.1/25 C532 1 2 1.0/16 C533 2 1 33/10 MVK/SKV 1 1 GND1 PWB assembly MAIN 6 (CC9XM2) A B C D E F G CONFIDENTIAL CC9XM2 G Panel Part 6 6 +3.3VP 2 94 D2N4 95 D2N5 96 D2N6 97 D2N7 98 D2N8 99 D2N9 100 VDD-100 R607 100 2010 2 1 C613 0.1/25 2 3 4 1 R622 0 1005 2 ENBYG2 5 6 7 8 9 2 G/CLX APG17 GDX 32 31 30 29 APG16 C6202 1 0.1/25 1 3 5 7 28 27 26 C6192 1 0.1/25 2 4 6 8 GVID9 GVID10 GVID11 GVID12 GVID1 APG14 GVID2 R632 10 2010 APG13 GVID3 APG12 GVID4 GVID5 APG10 GVID6 APG9 GVID7 APG8 GVID8 APG7 GVID9 APG6 2 2 2 2 GVID10 APG5 GVID11 1 1 APG4 GVID12 C617 0.1/25 APG3 C616 1.0/16 1 C615 5.0p-C 1005 APG15 GMON APG2 GDY GND1 APG1 1 2 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 R651 47K 1005 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C6212 1 0.1/25 APG11 2 R624 0 1005 1 GND1 33 APG18 1 RESETP CS_SH CLK2 DATA2 1 2 C614 0.1/25 R621 0 1005 R623 0 1005 1 2 C606 1 0.1/25 3 5 7 1 R605 3 100 5 2010 7 2 34 GDIRX GCLX 36 35 APG20 APG19 37 10 1 1 1 2 1 3 1 4 15 16 17 18 1 9 2 0 2 1 2 2 2 3 2 4 25 2 1 1 4 6 8 2 4 6 8 ENBYG1 R620 0 1005 1005 C605 0.001 2 1 2 1 R604 100 2010 1 2 2 R606 100K 1005 1 1 38 GENBX4 1 93 D2N3 C622 2 1 0.1/25 APG21 1 92 D2N2 39 GENBX3 GVID5 GVID6 GVID7 GVID8 1 91 D2N1 40 APG22 2010 2 4 6 8 1 90 D2N0 R633 10 1 3 5 7 42 41 APG23 1 GENBX3 GENBX2 GENBX1 GDIRX 89 DGND-89 GD2-0 GD2-1 GD2-2 GD2-3 GD2-4 GD2-5 GD2-6 GD2-7 GD2-8 GD2-9 43 APG24 GENBX1 GENBX2 1 GDX G/CLX GCLX GENBX4 I602 L3E06150S2A 88 DGND-88 GMON 44 C6232 1 0.1/25 GNRG 1 87 DGND-87 45 APG25 1 86 D1N9 46 GVID1 GVID2 GVID3 GVID4 APG26 1005 1 85 D1N8 C624 0.1/25 2010 2 4 6 8 1 84 D1N7 47 R634 10 1 3 5 7 2 1 83 D1N6 48 1 1 VDD-75 VDD-74 DGND-73 DGND-72 DGND-71 XFRIN SHCLK INVIN R/L SHT_O SHT_I AGND-64 AGND-63 AGND-62 AGND-61 AGND-60 VCC-59 VCC-58 PGND-57 CAL_IN PVCC-55 CAL_OUT PGND-53 PGND-52 PGND-51 82 D1N5 49 1 7 5 3 1 81 D1N4 50 R650 1 0 2 2 8 6 4 2 80 D1N3 2 1 MVK/SKV 1 7 5 3 20101 79 D1N2 C618 0.1/25 8 6 4 2 78 D1N1 APG27 1 2 R630 1.0K R631 1005 011005 R608 100 C625 22/16 1 1 C607 0.1/25 VID1 PVCC-49 VID2 PGND-47 VID3 PVCC-45 VID4 PGND-43 VID5 PVCC-41 VID6 PGND-39 PGND-38 PGND-37 VID7 PVCC-35 VID8 PGND-33 VID9 PVCC-31 VID10 PGND-29 VID11 PVCC-27 VID12 DXOUTG DYOUTG 1 1 R609 100 1 1005 2 24 23 22 21 20 19 18 17 16 15 14 13 2R603 0 1005 2 76 VDD-76 77 D1N0 APG28 1 GENBY1 1 APG30 P601 54104-36HUp 1 1 1 APG31 CHMDG I601 L3E01060P0A 2518 1 2 2 C627 0.001 C626 0.1/25 C628 0.1/25 2 1 R635 0 1005 GCLY G/CLY R625 1 2 0 1005 1 2 R626 1 2 1005 220 R627 1 2 0 1005 1 2 R628 0 1005 R629 0 1005 10 11 12 C604 0.1/25 APG32 VDD-1 DGND-2 DGND-3 TEST POWSV RESET SCS SCLK SDATA ADDR0 DXIN DYIN ENBY AGND-14 AGND-15 AGND-16 AGND-17 REF_IN VCC-19 REF_OUT AGND-21 LCCOM VCC-23 PGND-24 PGND-25 XRES A11 A10 TS DYIN CLYIN ENBY1I ENBY2I HRGIN DVDD GND-38 AVDD 9 GND-36 MON HVDD-34 DX CLX CLX ENBX5 ENBX4 ENBX3 ENBX2 ENBX1 DIRX HVDD-13 DIRY DY CLY CLY ENBY1 ENBY2 NRG GND-21 HVDD-22 IREF GND-24 8 0.1/25 2 GDY 2 2 R610 0 2 1005 2 1 1 R611 0 2 1005 2 1 1 R612 0 1005 7 SCS SCLK SDATA DIVS DXIN CLXIN ENBX5I ENBX1IN GND-9 CLK GND-11 PVDD 2 1 22/16 MVK/SKV 36 35 34 33 32 31 30 29 28 27 26 25 6 2 1 C603 APG33 75 7 4 7 3 72 7 1 7 0 6 9 68 6 7 6 6 6 5 6 4 6 3 62 61 60 59 58 57 56 55 54 53 52 51 GD1-0 GD1-1 GD1-2 GD1-3 GD1-4 GD1-5 GD1-6 GD1-7 GD1-8 GD1-9 C608 37 38 39 40 41 42 43 44 5 R602 0 1005 45 4 SHCLKG 2 46 3 DXOUTG CLXOUTG ENBXG5 1 ENBXG1 47 2 R601 220 1005 GDIRY GENBY2 C612 0.1/25 1 2 48 1 2 L604 10 H 2 1 R636 0 1005 1 R638 1 0 1005 1 2 APG35 APG34 APG29 2 1 C609 0.1/25 2 C602 5.0p-C 1005 1 2 1 C629 0.1/25 2 1 C610 0.1/25 2 1 22/6.3 MVK/SKV 1 1 DYOUTG CLYOUTG ENBYG1 ENBYG2 NRG RESETP C601 22/6.3 MVK/SKV L603 22 H 2518 XFRG 2 2 R637 02 1 1005 1 R639 0 1005 2518 L602 22 H 2 2518 L601 22 H APG36 GLCCOM C611 CS_LS CLK2 DATA2 3 0 ohm R 2 0 ohm R R613 0 1005 4 SHCLKG DIRXG ENBXG1 ENBXG5 DXOUTG CLXOUTG DYOUTG CLYOUTG ENBYG1 ENBYG2 NRG XFRG FRPG RESETP GD1-0 GD1-1 GD1-2 GD1-3 GD1-4 GD1-5 GD1-6 GD1-7 GD1-8 GD1-9 GD2-0 GD2-1 GD2-2 GD2-3 GD2-4 GD2-5 GD2-6 GD2-7 GD2-8 GD2-9 CS_SH CS_LS CLK2 DATA2 1 5 SHCLKG DIRXG ENBXG1 ENBXG5 DXOUTG CLXOUTG DYOUTG CLYOUTG ENBYG1 ENBYG2 NRG XFRG FRPG RESETP GD1-0 GD1-1 GD1-2 GD1-3 GD1-4 GD1-5 GD1-6 GD1-7 GD1-8 GD1-9 GD2-0 GD2-1 GD2-2 GD2-3 GD2-4 GD2-5 GD2-6 GD2-7 GD2-8 GD2-9 CS_SH CS_LS CLK2 DATA2 XFRG SHCLKG FRPG DIRXG +15.5V LCCOM VDDY DIRY DY CLY /CLY ENBY1 ENBY2 VSSY VSSX N.C. 4 NRG ENBX1 ENBX2 ENBX3 ENBX4 DIRX CLX /CLX DX VDDX VID1 3 VID2 VID3 VID4 VID5 VID6 VID7 VID8 VID9 VID10 VID11 VID12 2 MON DY LCCOM C630 GDIRY GDY GCLY G/CLY GENBY1 GENBY2 GNRG GLCCOM 1.0/25-F 2125 C631 1 2 0.1/25 C632 1 2 1.0/16 C633 2 1 33/10 MVK/SKV 1 1 GND1 PWB assembly MAIN 7 (CC9XM2) A B C D E F G CONFIDENTIAL CC9XM2 B Panel Part 6 6 +3.3VP 2 BVID6 BVID8 APB7 BVID9 APB6 2 2 2 BVID10 APB5 BVID11 1 1 APB4 BVID12 APB3 C717 0.1/25 C716 1.0/16 C715 5.0p-C 1005 2 2 R724 0 1005 1 GND1 APB8 1 R723 0 1005 1 DXOUTB DYOUTB 2 R721 0 1005 RESETP CS_SH CLK2 DATA2 1 1 2 C714 0.1/25 2 C706 1 0.1/25 3 5 7 1 R705 3 100 5 2010 7 ENBYB2 APB9 BVID7 1 1 APB10 1 APB11 BVID5 1 1 1 1 2 BVID4 1 10 1 1 1 2 1 3 1 4 15 16 17 18 1 9 2 0 2 1 2 2 2 3 2 4 25 1 9 APB12 1 8 APB13 BVID3 1 7 BVID2 R732 10 2010 1 6 2 R720 0 1005 R722 0 1005 2 2 4 6 8 2 4 6 8 1 1005 1 R704 100 2010 1 2 C705 0.001 2 1 2 ENBYB1 5 APB14 1 4 C7192 1 0.1/25 BVID1 1 3 26 APB15 1 2 R706 100K 1005 1 1 27 BVID9 BVID10 BVID11 BVID12 1 0.1/25 28 2 4 6 8 1 2 1 C713 1 3 5 7 1 100 VDD-100 R707 100 2010 29 APB16 C7202 1 0.1/25 1 99 D2N9 30 1 98 D2N8 31 1 97 D2N7 BDX 32 1 96 D2N6 APB17 21 20 1 95 D2N5 33 APB18 B/CLX C7212 1 0.1/25 22 19 1 94 D2N4 APB20 BDIRX BCLX 36 34 BENBX4 APB19 37 35 APB21 18 1 93 D2N3 38 BENBX3 BVID5 BVID6 BVID7 BVID8 23 17 1 92 D2N2 39 C722 2 1 0.1/25 2010 2 4 6 8 24 16 1 91 D2N1 40 APB22 15 1 90 D2N0 R733 10 1 3 5 7 42 41 APB23 BENBX2 C7232 1 0.1/25 25 14 1 BD2-0 BD2-1 BD2-2 BD2-3 BD2-4 BD2-5 BD2-6 BD2-7 BD2-8 BD2-9 43 APB24 26 13 1 89 DGND-89 44 BNRG BENBX1 27 12 1 BENBX3 BENBX2 BENBX1 BDIRX I702 L3E06150S2A 88 DGND-88 45 BVID1 BVID2 BVID3 BVID4 APB25 28 11 1 86 D1N9 C724 0.1/25 46 1005 29 10 1 85 D1N8 47 2010 2 4 6 8 30 9 1 84 D1N7 48 R734 10 1 3 5 7 2 APB26 31 8 1 VDD-75 VDD-74 DGND-73 DGND-72 DGND-71 XFRIN SHCLK INVIN R/L SHT_O SHT_I AGND-64 AGND-63 AGND-62 AGND-61 AGND-60 VCC-59 VCC-58 PGND-57 CAL_IN PVCC-55 CAL_OUT PGND-53 PGND-52 PGND-51 83 D1N6 49 1 R750 1 0 2 32 7 6 5 4 3 2 2 7 5 3 1 82 D1N5 50 1 8 6 4 2 81 D1N4 C718 0.1/25 7 5 3 20101 80 D1N3 APB27 2 1 MVK/SKV 1 2 R730 1.0K 1005 R731 011005 8 6 4 2 79 D1N2 87 DGND-87 BDX B/CLX BCLX BENBX4 C725 22/16 33 1 1 R708 100 78 D1N1 1 1 C707 0.1/25 77 D1N0 BMON 24 23 22 21 20 19 18 17 16 15 14 13 2R703 0 1005 1 R709 100 1 1005 2 VID1 PVCC-49 VID2 PGND-47 VID3 PVCC-45 VID4 PGND-43 VID5 PVCC-41 VID6 PGND-39 PGND-38 PGND-37 VID7 PVCC-35 VID8 PGND-33 VID9 PVCC-31 VID10 PGND-29 VID11 PVCC-27 VID12 CHMDB I701 L3E01060P0A 2 1 22/16 MVK/SKV 2 76 VDD-76 APB28 34 1 BENBY1 35 1 APB30 36 1 1 1 APB31 P701 54104-36HUp 1 BCLY B/CLY R725 2 0 1005 2 R726 2 1005 220 R727 1 2 0 1005 1 2 R728 0 1005 R729 0 1005 10 11 12 GND-36 MON HVDD-34 DX CLX CLX ENBX5 ENBX4 ENBX3 ENBX2 ENBX1 DIRX 2518 APB32 2 2 C727 0.001 C726 0.1/25 C728 0.1/25 2 1 R735 0 1005 BDY VDD-1 DGND-2 DGND-3 TEST POWSV RESET SCS SCLK SDATA ADDR0 DXIN DYIN ENBY AGND-14 AGND-15 AGND-16 AGND-17 REF_IN VCC-19 REF_OUT AGND-21 LCCOM VCC-23 PGND-24 PGND-25 XRES A11 A10 TS DYIN CLYIN ENBY1I ENBY2I HRGIN DVDD GND-38 AVDD 9 SCS SCLK SDATA DIVS DXIN CLXIN ENBX5I ENBX1IN GND-9 CLK GND-11 PVDD HVDD-13 DIRY DY CLY CLY ENBY1 ENBY2 NRG GND-21 HVDD-22 IREF GND-24 8 C704 0.1/25 APB33 2 2 1 C709 0.1/25 2 R710 0 2 1005 2 1 1 R711 0 2 1005 2 1 1 R712 0 1005 7 2 APB34 BDIRY 75 7 4 7 3 72 7 1 7 0 6 9 68 6 7 6 6 6 5 6 4 6 3 62 61 60 59 58 57 56 55 54 53 52 51 BD1-0 BD1-1 BD1-2 BD1-3 BD1-4 BD1-5 BD1-6 BD1-7 BD1-8 BD1-9 C708 36 35 34 33 32 31 30 29 28 27 26 25 6 2 1 C703 0.1/25 1 R736 0 1005 1 R738 1 0 1005 1 2 APB35 BENBY2 37 38 39 40 41 42 43 5 R702 0 1005 44 4 SHCLKB 2 45 3 DXOUTB CLXOUTB ENBXB5 1 ENBXB1 46 2 R701 220 1005 47 1 2 L704 10 H 2 1 APB36 APB29 C712 0.1/25 1 2 48 C702 5.0p-C 1005 1 2 1 C729 0.1/25 2 1 C710 0.1/25 DYOUTB CLYOUTB ENBYB1 ENBYB2 NRG RESETP 2 1 1 L703 22 H 2518 XFRB 2 2 R737 02 1 1005 1 R739 0 1005 2518 L702 22 H 2 2518 L701 22 H C701 22/6.3 MVK/SKV 2 1 22/6.3 MVK/SKV 5 BLCCOM C711 CS_LS CLK2 DATA2 3 0 ohm R 2 0 ohm R R713 0 1005 4 SHCLKB DIRXB ENBXB1 ENBXB5 DXOUTB CLXOUTB DYOUTB CLYOUTB ENBYB1 ENBYB2 NRG XFRB FRPB RESETP BD1-0 BD1-1 BD1-2 BD1-3 BD1-4 BD1-5 BD1-6 BD1-7 BD1-8 BD1-9 BD2-0 BD2-1 BD2-2 BD2-3 BD2-4 BD2-5 BD2-6 BD2-7 BD2-8 BD2-9 CS_SH CS_LS CLK2 DATA2 1 5 SHCLKB DIRXB ENBXB1 ENBXB5 DXOUTB CLXOUTB DYOUTB CLYOUTB ENBYB1 ENBYB2 NRG XFRB FRPB RESETP BD1-0 BD1-1 BD1-2 BD1-3 BD1-4 BD1-5 BD1-6 BD1-7 BD1-8 BD1-9 BD2-0 BD2-1 BD2-2 BD2-3 BD2-4 BD2-5 BD2-6 BD2-7 BD2-8 BD2-9 CS_SH CS_LS CLK2 DATA2 XFRB SHCLKB FRPB DIRXB +15.5V BMON APB2 BDY GND1 APB1 1 2 1 R751 47K 1005 LCCOM VDDY DIRY DY CLY /CLY ENBY1 ENBY2 VSSY VSSX 4 N.C. NRG ENBX1 ENBX2 ENBX3 ENBX4 DIRX CLX /CLX DX VDDX 3 VID1 VID2 VID3 VID4 VID5 VID6 VID7 VID8 VID9 VID10 VID11 2 VID12 MON DY LCCOM C730 BLCCOM BDIRY BDY BCLY B/CLY BENBY1 BENBY2 BNRG 1.0/25-F 2125 C731 1 2 0.1/25 C732 1 2 1.0/16 C733 1 1 2 1 33/10 MVK/SKV GND1 PWB assembly MAIN 8 (CC9XM2) A B C D E F G 1005 1 1 CHG0 1 1005 1005 RV95 2 2 1 1005 CV59 1 2 8.2K 1005 2 1 CV140.047/10 CV120.047/10 CV40 0.1/10 CV130.047/10 1005 1 1 GND1 F_SD/HD 1 RV52 0 1005 CV01 1 1 2 RV11 33 2 2 2 2 2 P1 R1 T1 U1 P1 R1 T1 U1 RMUXIN2 GMUXIN2 SMUXIN2 BMUXIN2 RMUXOUT AC2 AC2 AD1 AD1 AD3 AD3 W4 W4 1 CHBMUX 3 FB ASPECT0 ASPECT1 ASPECT2 REXT HSYNCIN0 VS0 RAI1 GAI1 SOG1 BAI1 HSYNCIN1 VS1 NC-AE1 AE1 AE1 1 CHAE1 NC-AE3 AE3 AE3 RAI2 GAI2 BAI2 AE2 AE2 AF1 AF1 AE4 AE4 RAI3 GAI3 BAI3 AF5 AF5 AE6 AE6 ADCXIN ADCXOUT U2 U4 W1 Y2 AC1 AD5 AC6 AISO0 AISO1 AISO2 AISO3 AISO4 PLLISO0 PLLISO1 U2 U4 W1 Y2 AC1 AD5 AC6 1 CHRMUX BMUXOUT 2AD11 1005 AD11 2 4 P2 P2 6 P4 P4 8 P5 P5 W2 W2 1 CHAE3 RV75 RV76 2 1 12K-1% 1005 2 1 1.0K-1% 1005 AFE_ADC_REF NC-AE7 AE7 AE7 1 CHAE7 1005 GND1 GND1 GND1 2 1 GND1 GND1 PWB assembly MAIN 9 (CC9XM2) A B C 2 GND1 12p-C 1005 CV02 1 2 470p 1005 CV11 1 2 1 12p-C 2 1005 1 CHSCV 1.0M-1% 1005 XV01 SMD-49 27.000MHz 1 RMUXIN1 GMUXIN1 SMUXIN1 BMUXIN1 I201 PW190 1005 1005 1005 3 22p-C RV07 1005 1 470 2 480i/p,576i/p CV34 1 2 OFF(HD) 1 10/6.3 2125 0 1 1005 2SA1980UFG 2 RV09 1 10K 2 F_SD/HD RV13 56QV01 23 1005 RV10 1 680 2 1005 2 1 2 1 CV15 22/6.3 2125 RV08 1 220 2 CV16 1 2 1 RV14 56 1005 RV12 1 22K 2 1 RV02 2 QV02 2SC5343UFG 2 R3 T3 U3 V3 P6 P6 RV05 1 10K 2 1005 AD6 AD6 AF11 AF11 1 2 RV06 10K Y1 Y1 1005 Y3 Y3 AA2 AA2 AB3 AB3 AC7 AC7 AE11 AE11 GND1 RV01 1470-1%2 1 QV11 SRC1202EF 1005 1005 3 CV43 1 2 CV44 1 2 0.047/10 CV36 1 2 0.047/10 1005 RV16 0.047/10 1005 0 CV28 RV17 1 2 1005 0 CV29 RV18 1 2 0.047/10 1 1005 2 0 CV31 1 2 0.047/10 1005 1 1005 2 1 1005 2 0.047/10 1005 1005 CHSOY 470p 1005 2 22p-C RV59 1005 1 470 2 1005 2SA1980UFG 2 RV60 1 33 2 CHSC1 QV10 2SC5343UFG 2 1 CV18 1 2 1 RV57 1 56QV08 23 3 CV17 1 2 1005 RV58 1 680 2 1005 RV54 1 220 2 1005 1005 2 2 RV56 1 10K 2 2 1 CV48 22/6.3 2125 RV55 1 22K 2 GND1 RV33 56 1005 1 RV03 21 RV70 2 22K-1% 1.2K-1% 1005 1005 CV411 2 1005 CV451 0.047/10 2 CV420.047/10 1005 1 0.1/10 CV46 2 2 1005 1 0.047/10 1005 L1_IN 1 GND1 CHY1 1 QV03 SRC1202EF 1 RV04 1 10K 1 3 5 7 CHCR1 3 2 1 R3 T3 U3 V3 2 2 1005 1 1005 1 1005 1 1005 1 RV64 10K 2010 RV61 33 2 CHSY1 1 1 CHCB1 1 2 1 1 2 CHB1 1 CHSOG1 1 1CHG1 1CHR1 QV04 2SA1980UFG RMUXIN0 GMUXIN0 SMUXIN0 BMUXIN0 CV49 1 2 RV96 10K 2010 CHV1 1 1 2 R5 T5 U5 V5 B 0.1 1005 CV10 0.047/10 10051 CV08 0.047/10 10051 1005 CV07 0.001 1 CV09 0.047/10 10052 RV19 220 RV42 56 2 3 1005 2SC5343UFG 3 R5 T5 U5 V5 1 CV06 0.047/10 1005 CHSOG 680 1005 RV45 1 1005 2 1 GND1 1 0.0047 1 8.2K 2 4 6 8 1 1 1 1 1 3 5 7 ANALOG INPUT PORT CV051 2 1005 CV041 0.047/10 2 CV030.047/10 1005 0.1/10 2 2 1005 1 QV09 RV47 220 1005 1005 CV33 1 2 22/6.3 2125 1 RV46 0 2 1005 1 CV47 1470p 2 1 3 HV01 2 RV41 SC200JT 182K-1%2 2125 RV65 10K 2010 2 4 6 8 2 GND1 RV53 1 22K 2 1 3 HV02 2 RV43 SC200JT 182K-1%2 2125 1 3 5 7 1005 R1_IN GND1 1 RV93 RV24 RV221 0 2 RV23 1 0 21005 1 0 2 1005 22p-C 1005 1 RV62 2 470 1005 1 APVG 1 2 1 47/6.3 MVK/SKV CV32 4 GND1 CV35 1 2 5 2 5 1 1 GND1 GND1 1 RV38 2 10K 1005 2 R_WL_in CHSCB1 CHSCV1 CHSCG1 CHSCR1 GND1 +5V 1 RV91 2 1390-1%2 1 1 APR 1 3 1 1005 2 GND1 CV58 1 0.001 B RV90 2 1390-1%2 GND1 110052 3 1 1005 3 3 1 R 3 L_WL_in 2518 2 1 1005 2 RV21 220 1 3 HV08 2 SC200JT 2125 18-1% 22-1% RV34 RV68 1 15-1% 21 20-1% 2 RV25 RV69 1 18-1% 21 22-1% 2 1.8K 1 1005 2 RV94 1.8K 1 3 HV15 2 SC200JT 2125 1 1005 2 1 3 HV07 2 SC200JT 2125 1 RV35 21 RV66 2 15-1% 20-1% 1 RV32 21 RV67 2 QV05 SRC1202EF 2 1 1005 2 RV20 220 RV74 RV72 1 15-1% 21 20-1% 2 RV73 RV71 1 18-1% 21 22-1% 2 CV56 1 0.001 B CV57 1 0.001 B RV89 2 1390-1%2 DV11 1 2 1 3 HV03 2 SC200JT 2125 110052 0.01/16 CV22 QV06 SRC1202EF LV01 100 H 2 1 RV63 1 75-1% 2 2 0.01/16 CV21 QV07 SRC1202EF 2 1 1005 0.01/16 CV23 CV27 1 2 1 CV25 47p-C 1005 CV24 1 2 2 1 4 1 RV97 0 2 1005 RV92 1 3 HV14 2 SC200JT 2125 GND1 SDS511 DV12 SDS511 1 2 SDS511 DV10 1 2 SDS511 DV08 1 2 DV07 SDS511 1 2 DV09 SDS511 1 2 1 4 APL L 1 3 HV13 2 SC200JT 2125 CHVY0 RV15 1 75-1% 2 CVBS 1 3 APSY APCV APW10 1005 9 11 2 1 1005 RV27 33 2 7 Y APW09 1 1 APSC G G APW08 3 1005 GND1 C 4 5 RV81 0 2 1005 0.0047 Audio Right(Wireless) 1 7 9 8 8 6 6 10 10 11 GND (for Wireless audio) GND1 CHVCB0 RGB_COMP EV01 YKC22-0491N Audio Left(Wireless) 1 1005 RV98 1 0 2 1 680 1005 RV36 VSync (Wireless) 1005 1 RV78 2 0 1 3 HV11 2 SC200JT 1 RV79 2 2125 0 1 3 HV12 2 SC200JT 2125 APW07 5 2 RV28 33 2 DV18 SDS511 1 2 1 HSync (Wireless) 1 1 APW06 6 GND1 1005 1 GND 2 1 1 GND1 RV80 0 2 RV82 0 2 1 1 CV37 1 2 7 1 1005 RGB_COMP RGB 1 GND1 GND1 1 2125 APW05 8 Analog Blue (Wireless) 3 3 9 CHVCR0 GND1 Component 2 QV14 SRC1202EF 1 1 3 HV09 2 SC200JT 2125 1 RV77 2 0 1 3 GND1 HV10 2 SC200JT GND 1 RV26 33 2 47p-C 1005 1 GND1 0 2 3 1 1 3 75-1% HV06 2 SC200JT 1 RV31 2 2125 75-1% 11 4 2 QV13 SRC1202EF APW04 1 SDS511 SDS511 DV06 1 2 SDS511 1 1 3 HV04 2 SC200JT 1 RV29 2 2125 1 3 75-1% HV05 2 SC200JT 1 RV30 2 2125 APVY Y4 4 QV12 SRC1202EF 3 47p-C 1005 1 3 QV15 SRC1202EF Analog Green (Wireless) C 10P 1005 B 0.01 1005 CV38 1 2 C 10P 1005 CV20 1 2 CV30 1 2 B 0.01 1005 CV39 C 10P 1005 1 2 CV26 B 0.01 1005 1 2 10 DV03 1 2 SDS511 SDS511 DV04 1 2 DV02 1 2 SDS511 DV05 1 2 DV01 1 2 Cb3 APW02 GND GND1 Cr APVB Cb Y SOY GND1 APW01 11 CV60 G1 GND1 APVR 2 1 Cr2 DV15 SDS511 1 2 G2 Analog Red (Wireless) +3.3V EV02 YKC21-4199N DV16 SDS511 1 2 RV51 75-1% 1 SOG 2 1005 1005 1005 RV44 1 75-1% 2 1005 RV40 1 75-1% 2 RV39 1 75-1% 2 RV88 2 1820-1%2 ES04 ZH-11V DV17 SDS511 1 2 1 CHB0 +3.3V CV55 1 470P B RV87 2 1820-1%2 CV53 1 470P B RV86 2 1820-1%2 B G R 1005 GND1 CV54 1 470P B RV48 RV49 1 10 2 10 2 1005 1005 1 DV14 SDS511 1 2 RV50 10 2 DV13 SDS511 1 2 1 CHR0 1005 RV85 2 1820-1%2 DSUB1_B DSUB1_G DSUB1_R RGB.H RGB.V 5 6 GND1 CV52 1 470P B 1005 1005 RV84 2 1820-1%2 CV51 1 470P B 1005 6 CV50 1 470P B 1005 RV83 2 1820-1%2 CONFIDENTIAL D E F G 1005 RS03 1 10K 2 1005 1005 RS14 1 33K 2 1005 RS15 1 33K 2 RS16 1 33K 2 1005 4 5 VS+ 14 CEB + - OUTB INB- INB+ 13 RS37 1 75-1% 2 DSUB1_B 1005 6 7 8 CEC + - INC+ OUTC INC- 10 RS35 1 75-1% 2 RS30 1560-1%2 9 RS29 1560-1%2 1005 1005 5 1.0p-C 1005 1005 RS72 1 100 2 DSUB1_G 1005 CS08 1 2 NC-11 11 NC-6 RS36 1 75-1% 2 RS32 1560-1%2 12 1005 1005 10/6.3 2125 1.0p-C 1005 RS33 2560-1%1 1005 RS21 1 0 2 DSUB1_R 1005 CS07 1 2 1.0p-C 1005 15 RS58 2560-1%1 VS+ 14 1005 5 + - INB+ OUTB INB- 13 RS57 1560-1%2 12 1005 6 R 7 NC-6 CEC 1005 INC+ + - OUTC INC- 1.0p-C 1005 10 4 RS55 1560-1%2 9 1 RS56 2 560-1% 1005 1005 1005 1005 RS73 1 100 2 8 CS23 1 2 NC-11 11 RS61 1 75-1% 2 4 G CEB CS22 1 2 1.0p-C 1005 RS60 1 75-1% 2 1005 RS41 1 33K 2 RS62 1 75-1% 2 VS- OUTA TP002 1 1005 +3.3V GND1 RS68 1 10K 2 R + RS54 1560-1%2 1 R GND 6 G1 16 1.0p-C 1005 1005 RS48 0 2 RS47 1 0 2 10/6.3 2125 RS38 1 75-1% 2 11 3 CEA 1005 1005 1 B CS19 1 2 1005 10/6.3 2125 RS44 1 8.2K 2 B GND 8 12 2 SDA G/Y G/Y GND 7 2 B RS39 1 75-1% 2 3 RS42 1 33K 2 1 1 HS15 SC200JT 2125 1 3 2 API2G HS14 SC200JT 2125 1 3 2 API2R HS13 SC200JT 2125 1 3 2 CS24 1 2 RS59 1560-1%2 1005 RS45 1 8.2K 2 CS20 1 2 API2B 9 1005 RS43 1 33K 2 GND1 4 2125 IS03 EL8302IUZ-T7 INAINA+ 1005 1005 10/6.3 2125 RS46 1 8.2K 2 10 SYNC GND PLUG 13 H 1 RS26 2 10K-1% 1 RS28 2 10K-1% 5 GND RS40 1 75-1% 2 HS17 SC200JT 2125 1 3 2 G2 1 RS49 1 0 2 CS21 1 2 1 1 V14 VCLK HS16 SC200JT 2125 1 3 2 RGB IN 2 1 ES02 3114-15FA 15 SCL 1 APV2 15 CS18 10/6.3 1 2 APDG2 APH2 RS34 1560-1%2 16 1005 1005 CS04 1 2R OUTA 1005 RS22 1 0 2 10/6.3 2125 + VS- 1005 RS18 1 8.2K 2 RS19 1 8.2K 2 CEA GND1 4 2 1 47/6.3 MVK/SKV CS01 1005 RS01 1 47K 2 RS12 1 75-1% 2 CS05 1 2G 3 RS23 1 0 2 RS17 1 8.2K 2 R +5V CS09 1 2 1005 2 B 10/6.3 2125 RS11 1 75-1% 2 1 GND R 6 G1 CS06 1 2 RS13 1 75-1% 2 2 G/Y GND G/Y 7 2 2518 GND1 2125 IS02 EL8302IUZ-T7 INAINA+ 1 RS31 2 560-1% 1005 GND 4 A2 3 1005 RS02 1 100 2 CS02 6 7 5 SDA SCL 8 WP A1 2 8 6 4 2 2010 7 5 3 1 B 11 1 3 2 HS09 SC200JT 2125 CS03 10/6.3 1 2 1 HS08 SC200JT 2125 1 3 2 HS07 API1G SC200JT 2125 1 3 2 HS06 API1R SC200JT 2125 1 3 2 LS01 10 H 3 1 1 3 GND B 8 SDA 1 QS02 SRC1202EF API1B 12 1 6 4 1 H APDA VCC IS01 S-24CS02AFJ-TB-G GND PLUG 13 1 A0 1 5 G2 10 SYNC V14 GND VCLK 9 APH 2 RS07 0 15 2 1 0.1/10 1005 56 1 1005 56 1 RS08 1005 2 ES01 3114-15FA SCL HS10 SC200JT 2125 1 3 2 1005 2 1005 1 RGB IN 1 1 1 APV RS04 0 1 HS12 SC200JT 2125 HS11 3 1 2 SC200JT 2125 3 1 2 APCL 1 APDG 2 RS09 6 5 CONFIDENTIAL RS05 1 47K 2 1005 RS06 1 47K 2 TP003 1 GND1 RS70 1 100 2 2 CS14 1 2 HS01 SC200JT 2125 1 3 2 APOG HS05 SC200JT 2125 1 3 2 APOR HS02 SC200JT 2125 1 3 2 1 PLUG 13 B H GND 8 3 B V2 2 R RS78 1 100 2 1005 GND1 5 Y 4 In2 6 VCC 5 Y 4 2 100 1 RS65 RGB1/2 RS75 1 100 2 H 3 1005 RS66 1 47K 2 1005 VCC RGB.H GND1 1005 IS09 1 In1 2 GND 3 In0 VS RS76 1 100 2 V CS11 0.01/16 1005 V1 47p-C 1005 1 CS15 1 2 R GND 6 G1 HS L:RGB1/H:RGB2 Selector 1 7 11 In0 6 RS67 3 1 100 2 1005 1 SN74LVC1G97DCK CS28 1 2 G/Y GND 3 GND1 RS82 1 100 2 47p-C 1005 2 12G/Y SDA GND 2 In2 2 1 1005 9 In1 2 1 1005 1005 APOB 1 1 HS04 SC200JT 2125 1 3 2 APH3 RS77 1 100 2 H1 1 CS10 0.01/16 GND1 4 VCLK HS03 SC200JT 2125 1 3 2 RGB OUT 1 APV3 1005 GND 10 V GND SYNC 14 SN74LVC1G97DCK RS81 1 100 2 H2 5 G2 CS27 1 2 SCL IS08 47p-C 1005 15 Selector 47p-C 1005 1 ES03 3114-15FABNS1XN 1 RS51 2 10K-1% 3 1 RS53 2 10K-1% 1005 APDG3 QS01 SRC1202EF 1005 RGB.V 2 RS84 1220-1%2 IS06 GND1 SN74LVC1G97DCK RS85 1220-1%2 RS79 1 100 2 1 In1 2 GND 3 In0 In2 6 VCC 5 Y 4 In2 6 VCC 5 Y 4 1005 CS16 1 2 RS87 1220-1%2 47p-C 1005 RS86 1220-1%2 HS CS12 0.01/16 2 1 1005 IS07 SN74LVC1G97DCK 1 CS17 1 2 1005 47p-C 1005 RS80 1 100 2 1 In1 2 GND 3 In0 VS 1 CS13 0.01/16 2 1 1005 PWB assembly MAIN 10 (CC9XM2) GND1 A B C D E F G CONFIDENTIAL 3 QA03 2SD2114K 2 3 TP-R TPGND1 1005 RA31 4.7K 2 Connects with a Speaker 1 1 1 2 1005 RA38 5.6K CA30 1 2 CTL VCC GND OUT C 2 1 3 1 CA61 0.01/25 1 CA64 47/16 1 2 MVK/SKV 1 2 CLK-A 2 +17V 2 1005 RA28 100K 2 1005 1 1 2 1 1 2 QA04 2SA1980UFG 1 2 CA28 1005 1 RA29 2.2K 1005 2 47/25 MVK/SKV 1 RA27 10K 1 3 2 1 1 RA33 0 2 POWER5 1005 1005 LA15 2 1 MPZ2012S101A 2125 RA17 82K-1% 2 1 RA34 0 2 MUTE 1005 1005 2 GND1 LA13 2.2 H 2 1 LA16 3 1 DA03 SDS511 2 DA02 SDS511 2 4 DA07 UDZS9.1B 1 2 1 1005 RA15 5.6K-1% 1 2 1005 RA16 5.6K-1% 1 2 1 LA14 MPZ2012S101A 2125 2 1 CA39 10/16 MVK/SKV TP-L QA05 DTC114EE CA20 0.47/10 1 2 1 1 EASP ZH-02H 4 DATA-A CA21 680p 1 2 SP+ Vout 1 1005 RA32 4.7K 1 2 1 DA04 UDZS2.0B DA01 1 2 RA26 5.6K 3 SP- 1005 DA06 SDS511 GND1 2 Speaker Monitor 5 GND1 SDS511 APAO- Np Vin RA48 1 6.8K 2 Audio out Test Pin 3 APAO+ 3 +15.5V 1005 2 1005 1 3 1 DA05 UDZS2.0B 2 1 3 2125 GND RA49 1 100 2 RA24 1 100 2 1005 RA25 1 100 2 1005 1 1005 2 2 1 LA12 SC200JT Vcont 2 1 1005 2 RA12 1.0K-1% 1 RA30 22K 2 QA02 2SD2114K 1 RA11 1.0K-1% 1 3 1 CA17 47/16 MVK/SKV IA04 TK11185CSC 1 CA19 1.0/16 2 S C 17 2 2 CA16 0.1/16 1005 2 CA15 47/6.3 1 2 QA06 2SC5343UFG 1 LA18 100 H 2 1 2 SI 18 16 G N D RA69 0 2 1005 1 VCC 19 15 FILTER QA08 2SC5343UFG RA70 0 1005 2 Audio Amp +5V CA54 0.33/10 1 1005 QA07 2SC5343UFG 2 1005 1005 2518 1 1005 2 GND1 L - out 1 2 RA64 5.6K GND1 14 E2 0 4.7K 2 1005 1005 2 1005 2 CAP 20 RA63 5.6K 2 1 3216 13 E1 1 2 5 2 OUT2 21 RA14 1.0K RA04 1 270K 2 1005 RA06 1 270K 2 1005 RA05 1 270K 2 RA03 1 270K 2 100p-C 1005 100p-C 1005 2125 2 1 3 LA10 SC200JT 12 D2 CA53 1 0.1/16 1005 2 1005 CA62 1.0/16 RAA4 2 CA56 1.0/16 1 2 CA13 1 1005 2 1.0/16 RA62 4.7K 1 2 1 1005 2 CA14 1.0/16 GND1 OUT1 22 1 4.7K RA61 11 D1 2 1005 1 1 2 1 BNF2 24 BOUT2 23 1 CA58 0.0033 2 1 2 1005 1005 CA38 1 0.1/16 RA46 5.6K 1 1 RAA3 0 2 1005 RAA2 0 RA66 1 0 2 1005 1 1005 2 RA68 1 CA59 0.0033 1 C1 1 1005 2 1 1005 2 1 CA37 1 0.1/16 BOUT1 25 B2 10 C2 9 2 1.0/16 RAA1 0 CA36 1 0.1/16 RA13 1.0K QA20 2SC5343E 2 2 1005 1 RA96 10K 1005 2 1 2 1005 1 1 2 2 1.0/16 MVK/SKV 1005 1 2 3 1 1005 2 CA75 220P RA95 150K 2125 RA76 0 1 1005 1 1 1005 2 CA11 RA10 4.7K 1 CA55 1 2 CA12 1.0/16 1005 RA67 4.7K 2 2 1005 1 RA94 120K 100 QA21 2SC5343E 2 1005 1 10K 2 1005 1 RAA0 2 1 1 1 RA93 1 2 2 4.7K RA65 0 2 1005 1 1 2 CA63 1.0/25 BNF1 26 1005 2 1005 1 B1 +6.6V 2 1005 1005 2 7 CA35 1 0.01/16 RA41 100 100/6.3 MVK/SKV MOUT2 27 CA34 1 0.01/16 RA44 0 2 1005 1 2 CA31 1 2 A2 2 RA45 5.6K 2 1 1005 6 CA33 1 0.01/16 1 RA35 15K-1% 2 1.0/16 1 2 1005 1 1005 2 MNF2 28 CA32 1 0.01/16 RA36 15K-1% A1 RA43 0 2 1005 1 1005 2 5 5 RA37 10K-1% 2 1.0/16 4 1 1005 2 MOUT1 29 3 2 1 1005 SEL2 2 CA29 0.1/10 4 1005 1 100/10 MVK/SKV MNF1 30 1 RA42 1 100 2 REC1 32 2 CA18 1.0/16 LA08 SC200JT 1 3 2 2125 1 1 REC2 31 VIN2 1.0/16 CA07 1 2 2 1005 1 RA88 10K CA73 220P RA87 150K SEL1 3 1.0/16 CA08 1 2 QA18 2SC5343E 1 2 1005 1 2 1 2 RA85 2 1005 1 1005 1005 RA86 120K QA19 2SC5343E 100 2 10K 2 1005 1 RA92 2 8 RA09 3 2 1 1005 2 82K 1005 RA52 82K 2 RA51 1 VIN1 R - out CA06 1 2 CA04 1 2 100p-C 1005 CA05 1 2 100p-C 1005 CA03 1 2 2 1 2 1005 1 1 1005 1005 RA98 1005 120K 82K 1005 RA02 2 2 1 1005 1005 CA52 100p-C 1 2 CA51 100p-C 1 2 1 CA70 4.7/16 1 2 2 LA06 SC200JT 1 3 2 2125 4.7/16 RGB Audio L - in2 LA54 SC200JT 2125 RA07 4.7K 1 1 1005 2 CA09 RA08 4.7K 1 1 1005 2 CA10 RA75 0 2 1005 CA69 1 2 APAR3 EA02 JY-3542*01-250 3 5 4 2 1 1 2125 1 APAL3 4 1 3 2 1 1 GND1 1 1005 2 RGB Audio R - in2 2125 long pin:R short pin:L 82K 1005 RA01 1005 1005 CA02 100p-C 1 2 APAL2 LA52 SC200JT 1 3 2 1 Audio IN2 1 APAR2 11 33 77 88 22 LA02 SC200JT RGB Audio R - in1 1 3 LA04 2125 2 SC200JT RGB Audio L - in1 1 3 2 2125 1 44 66 55 CA01 100p-C 1 2 Audio IN1 1 EA01 HSJ1003-01-010 1 CA67 2 1005 2125 CA68 2 1 4.7/16 4.7/16 2125 2 1 RA74 0 APAL1 1 APAR1 APAG 0 2 3 CA76 220P RA99 150K RA73 2 RA89 1 1005 2 1 RA97 100 0 2 3 CA74 220P RA91 150K RA72 2125 1 4.7/16 2 1 5 2125 1005 L1_IN 5V IA01 BD3883FS 1 GND1 IA03 BA00BC0WFP TPR-in TPL-in 1005 1005 RA90 1005 120K 2 1 CA66 Audio OUT Audio in Monitor 2 1005 1 RA80 10K QA16 2SC5343E 2 2 1 1 2 1005 1 1005 1005 1005 RA78 120K QA17 2SC5343E 2 10K 2 1005 1 2 1005 1 2 3 100 R1_IN Audio IN3 Sheet 9 RA84 1005 1005 RA82 1005 120K 2 1 1 2 RA81 100 4.7/16 CA65 Sheet 9 1 CA72 220P RA83 150K RA71 1005 1 0 2 2 3 1 6 1 L_WL_in 2 R_WL_in Sheet 9 CA71 220P RA79 150K Sheet 9 RA77 100 Wireless LAN Audio 1 6 2518 2 600 H 3216 1 1 QA01 1 2SA1980UFG 1 1005 2 RA20 68K 1005 1 10K RA47 3 2010 2 4 6 8 1005 2 1 3 5 7 RA23 0 GND1 1 2 1 RA21 68K 2 1005 RA22 2.2K 2 CA27 4.7/6.3 GND1 2 1005 1 1 0.47/10 RA39 100K CA22 1 2 1005 2 RA18 6.8k-1% 1 2 82K-1% 1005 2 RA19 1 680p 1005 BYPASS C1 C1 C2 IN+ 0.47/10 C2 CA23 1 2 B3 C3 IN- B2 B1 IA02 TPA6203A1ZQV C3 CA24 1 2 A1 A1 VO- GND B2 B3 B1 UNITED COMMON MODE VO+ A3 SHUTDOWN A3 VDD 2 1 MVK/SKV 1005 2 600 H 3216 CA26 0.1/16-F 1 2 1 CA25 47/6.3 LA17 Audio GND A_GND PWB assembly MAIN 11 (CC9XM2) A B C D E F G 1 CONFIDENTIAL 6 5 DK21 1 2 5 2 1 CK22 1 2 1 VSS1 /RST 28 2 OSC1 PTA0 27 3 OSC2 PTA1 26 4 VREG PTA2 25 5 VDD PTA3 24 6 PTD0 PTE0/TCLK 23 7 PTD1 PTE2/TCH1 22 8 PTD2 PTA4 21 9 PT03 PTA5 20 10 PTD4 PTA6 19 RMT RMT 11 PTE1/TCH0 PTA7 18 TXD TXD 12 PTE3/D+ PTD5 17 RXD RXD 13 PTE4/D- PTD6 16 14 PTC0 /IRQ 15 1.0/10 RK28 1 1.0M 2 1.0/10 CK24 1 2 0.1/16-F 1005 CK27 1 2 IK21 RRX6000-0702L XK25 6MHz3 SDS511 1005 RK32 2 10K 1 6 1 RK30 0 2 RX 4 TX G2 2125 1005 APKG APRX 1 GND APTX IK01 DS14C232CM 1 C1+ 2 V+ 3 C1- 4 C2+ 5 C2- 6 V- 7 Dout2 VCC 16 CK05 RK23 1 220 2 RK03 1 100 2 1005 1 G1 2125 RK02 1 100 2 1 5 3 USBDP CK02 1.0/16 1 2 3 4 1005 RK22 1 220 2 2 1 47/6.3 MVK/SKV USB D+ +5V USBDM CK04 1.0/10 1 2 USB D- 2 APK2 1005 SDS511 1005 DK22 1 2 1005 RK33 1 0 2 RK34 1005 1 0 2 CK03 1.0/10 1 2 1 APK1 1 EK10 PH-05V 1 3 2 RK26 1 100 2 1 RK29 0 2 1005 1.0/10 RK27 1 100 2 RK31 1 47K 2 4 +5V CK21 1 2 CK25 1 2 0.1/16-F 1005 CK26 1 2 1.0/10 1005 GND1 GND 15 Dout1 Rin1 Rout1 Din1 Din2 14 13 12 11 2 RK04 2 100 1 10 RK05 2 2.2K 1 RK06 1005 1 3.3K 2 1005 Rin2 Rout2 9 1.0/16 CK01 1 2 8 1005 GND1 1 1 PWB assembly MAIN 12 (CC9XM2) A B C D E F G RE38 0 2010 CONFIDENTIAL 7 5 3 1 RE39 1 0 1005 *CE19 0.01/16 1 1005 6 1 *RE41 0 2 8 6 4 2 2 2RE40 0 1005 1 2 6 *IE02 SN74LVC541APW OE1 1 20 2 19 3 18 4 17 5 16 6 15 7 14 VCC 1005 A1 TEA1 A2 TEA2 A3 TEA3 A4 TEA4 A5 TEA5 PCS0 1 *LE10 C1V222-2A 3216 1 3 2 *RE43 1 0 2 *RE42 0 1005 A8 8 13 1 GND 9 12 10 11 1 3 5 7 Y2 Y3 Y4 Y5 Y6 1 *RE46 33 1 *RE45 33 2 1005 2 1005 Y7 1 Y8 RE47 33 1005 1 CHKE13 1005 2 5 2010 2 4 6 8 *RE55 10K 2010 1 3 5 7 2 4 6*RE54 810K 2 *CE01 0.01/16 1005 1 3 5 7 1 1 6 0 5 9 58 57 56 5 5 5 4 53 52 51 50 49 48 47 46 45 44 43 42 41 D2 D1 D0 P28 P27 P26 P25 VDD-33 CLK A4 A3 A2 A1 A0 X2 VSS-25 X1 VDD-23 P8 P7 65 AI1 2 67 AI3 *RE24 10K 1005 *CE08 0.01/16 1 2 10K 1005 64 AVD 68 AI4 69 VR 70 AVS 1005 D4 D5 D6 D7 *IE01 TE7780 71 Select 72 VSS-72 *CE20 2 1 0.1/16 73 VDD-73 74 D4 75 D5 76 D6 77 D7 78 Wakeup 2 79 #INT P31 VSS-2 P32 P33 P34 P35 P36 P37 P38 P15 P16 VSS-12 P17 P18 P21 P22 P23 P24 P5 P6 7 8 9 35 34 2 4 6 8 *RE56 10K 2010 33 32 31 4 30 29 28 27 26 25 24 23 22 21 1 *CE06 12p-C 1 1 *RE53 2 1 1005 330 *XE01 1005 14.7456MHz 1 2 FCX-03 *CE07 1 2 12p-C 3 4 1005 2 2 6 8 5 7 2 *CE04 0.01/16 1005 10 1 1 1 2 1 3 1 4 15 16 17 18 1 9 2 0 *RE57 10K 2010 +3.3V 8 6 4 2 2 2 6 36 1 2 *RE62 33 1005 *RE59 10K 2010 GND1 CHKRX2 1 CHKTX2 1 5 1 *RE04 1005 1 33 2 D0 D1 D2 D3 D4 D5 D6 D7 4 1 3 5 7 37 7 8 5 6 4 3 2 *RE58 1 10K 2010 3 10K RE60 1005 RE70 10K 1005 2 7 5 3 1 1 1 1 1 1 *DE07 UDZS3.9B 1 *DE04 UDZS3.9B 2 *DE05 UDZS3.9B GND1 2 3 1 *DE06 UDZS3.9B 2 *RE15 4.7K 1005 2 1 80 #Invalid 2 1 *CE05 0.01/16 1005 *RE01 33 1005 *RE61 2 33 1005 1 EXTINT 38 3 *RE68 1 100 2 1005 *LE30 1000 H 2 1 2 *LE31 1000 H 2 1 2125 3 D-RESET QE01 SRC1202EF 1 1 63 VSS-63 66 AI2 APE14 1 1.8K-1% 1005 1 *RE25 2 39 CHKRX1 1 CHKTX1 1 4 *RE26 10K 1 1005 2 1 *RE29 2 D3 D2 D1 D0 40 *RE02 1 1.0M 2 61 VSS-61 62 RST CPU-RESET 2 1005 *RE64 100 1005 2 *RE05 0 1005 RDN 1 *CE03 0.01/16 1005 *RE67 1 10K 2 *RE08 10K 1005 *RE06 0 1 1005 2 *RE66 100 1 1005 2 1 2 *RE65 100 1 2 1005 *CE02 0.01/16 1005 1 2 2 2 Dev1 Dev0 MODE1 MODE0 VDD-56 VDD-55 P14 P13 VSS-52 P12 P11 P4 P3 P2 P1 #WR #CE #RD VSS-42 D3 *CE21 1 2 *RE07 10K 1005 1 1 10/6.3 2125 *CE10 MVK/SKV 22/6.3 1 2 *LE14 C1V222-2A 3216 1 3 2 D0 D1 D2 D3 D4 D5 D6 D7 A7 2 *RE44 33 2010 2 4 6 8 Y1 GND1 1005 +3.3V 2 1 *RE03 33 2 5 A6 2 CHKERR 1 CHKSBY 1 CHKMSP 1 WRN *RE48 0 1005 OE2 APE15 *EE02 SH-02H 1 2 2125 1 EE01 ZH-13V G2 1 G1 *RE83 1 100 2 8 1 1 3.3K 1005 1 *RE63 2 1 1 2 100 1 1005 1 1 *RE73 2 100 1 1005 *RE74 2 100 1 1005 +6.6V 2 M_RESET (actice low) 9 RXD1 8 TXD1 7 RXD2 6 TXD2 5 MSLEEP 4 SBUSY 3 WL_DET[WL model] or ES_BUSY[N model] 2 GND 1 2125 ES_TXD MSLEEP SBUSY ESBUSY 2 1 CE29 2 100 1 1005 GND1 *RE76 2 100 1 *RE79 1005 100 1005 *RE89 1002 1 2 1005 1 2 *RE77 1 100 1005 *RE78 2 100 1 1005 2010 ES_RXD 2010 *RE82 0 1 2 3 4 6 5 8 7 2125 1.0/10 210K-1%1 RE97 2 4 6 8 5 2 1 CE30 *RE81 0 2125 1.0/10 1 3 5 7 6 CE31 1 2 2IN- *RE75 GND1 A 1005 1 4 1 2 GND1 0.01/16 1005 1IN+ 1005 3 210K-1%1 REA1 7 1005 2OUT 2IN+ Y *RE88 1 Battery 3V 10 1005 1IN- GND In0 TXD1 2 4 3 5 12 11 APE10 *LE17 APE09 600 H 2 1 *LE18 1608 APE08 600 H 2 1 *LE19 1608 APE07 600 H 2 1 *LE20 1608 APE06 600 H 2 1 *LE21 1608 APE05 600 H 2 1 *LE22 1608 600 H APE04 2 1 *LE23 1608 APE03 600 H 2 1 *LE24 1608 APE02 600 H 2 1 *LE16 1608 APE01 1000 H 2 1 3216 6 VCC 1 3 2 *CE11 0.01/16 1005 0.1/10 1005 VCC 1005 1OUT REA3 16.2k-1%2 CE27 1 2 4.7/6.3 2125 4.7/6.3 1005 2125 22.7K-1%1 *RE92 1 1 IE15 LM358AD 1CE262 1005 GND RXD1 REA2 115K-1%2 *RE96 0 2 2 In2 LE26 1 1005 210K-1%1 RE99 1005 REA5 16.8k-1%2 1005 0 1 *RE91 2 9 10 11 12 2 100 1 1005 RE98 15.1K-1%2 2 1005 COM-5 COM-6 COM-7 NC-8 6 8 7 5 5 2 100 1 1005 1005 1 In1 *RE72 *RE71 NW_RST_PW GSENSOR 1005 CE25 1 2 1CE242 4 3 2 1 9 4 CE28 1 2 3 XOUT NC-11 YOUT NC-9 G1 2 NC-1 ST COM-3 NC-4 12 11 10 1 0.1/10 1005 SDS511 *RE95 1 0 2 0 1 *REA4 NC-16 VS-15 VS-14 NC-13 1 2 DE08 4.7/6.3 2125 13 14 15 16 IE14 16 15 14 13 ADXL322 G1 RE93 1 100 2 1005 6 7 8 +3.3V 1 1005 +6.6V APE11 1 +5V *RE16 1 3.3K 2 *RE85 1 100 2 2125 1005 *IE04 SN74LVC1G97DCK 13 APE12 GND *LE32 2125 1000 H 2 1 *RE87 1 100 2 1005 1005 1005 2100-1%1 RE94 2 *RE86 1 100 2 *RE84 1 100 2 PWM_G +15V *LE15 1000 H 2 1 3216 1005 APE13 1 LE25 1 3 2 1 FAN+15POW RE81 and RE82 put near EE01 connect thick pattern to EE01 1 WL_DET PWB assembly MAIN 13 (CC9XM2) B C D E F G ED-X10/ED-X12(CC9XM2) Basic circuit diagram list PWB assembly CONTROL PWB assembly MAIN 5 PWB assembly REMOTE PWB assembly MAIN 6 POWER UNIT BALLAST 1 PWB assembly MAIN 7 POWER UNIT BALLAST 2 PWB assembly MAIN 8 POWER UNIT CIRCUIT PWB assembly MAIN 9 PWB assembly MAIN 1 PWB assembly MAIN 10 PWB assembly MAIN 2 PWB assembly MAIN 11 PWB assembly MAIN 3 PWB assembly MAIN 12 PWB assembly MAIN 4 PWB assembly MAIN 13 ED-X10/ED-X12 QR68301 YK No.0567 Printed in Japan (JE)