Download 3 - Videojet

Videojet 1620/1620 UHS Operator Manual
Icon
-
-
Name
Remedial Action
Ink Viscosity Too
High
Pressure setpoint for correct velocity is
greater than calculated pressure by > 0.1
bar. Contact Videojet maintenance
engineer.
Ink Viscosity Too
Low
Pressure setpoint for correct velocity is
less than calculated pressure by > 0.1
bar. Contact Videojet maintenance
engineer.
Pressure Too High
The actual pressure is > 0.2 bar above
the target pressure. Contact Videojet
maintenance engineer.
Pressure Too Low
The actual pressure is > 0.2 bar below
the target pressure. Contact Videojet
maintenance engineer.
No Ink Cartridge
No ink cartridge present. Insert a new ink
cartridge.
Wrong Ink
Cartridge
The cartridge inserted into the ink
cartridge holder contains the wrong ink
type. Fluid REF and fluid TYPE must
match ink core module specifications.
Ink Cartridge
Expired
Ink past expiry date. Insert a new ink
cartridge.
Ink Cartridge
Removed
Ink cartridge smartchip data reads no
cartridge present. Refit an empty ink
cartridge.
Ink Insertions
Exceeded
The current ink cartridge inserted more
than ten times. Insert a new ink
cartridge.
No Make-up
Cartridge
No make-up fluid available for addition to
the ink core module. Insert a new makeup cartridge.
Wrong Make-up
Cartridge
The cartridge inserted into the make-up
fluid cartridge holder contains the wrong
make-up fluid type. Insert a new makeup cartridge.
Table 7-5: Warning Icons (Continued)
7-10
Printer Status Icons
Rev AC