Download Service Manual

Table 6-1. Power-on
Errors
Error #
Definition
Corrective Action
6500
Defective ROMs or other related hardware
problem on CPU assembly.
Replace CPU assembly.
6501
Failed to initialize disk controller. Disk drive
connecting cable bad, disk drive bad, or CPU
assembly bad.
1. Replace cable.
2. Replace disk drive.
3. Replace CPU assembly.
6502
Failed to complete loading of software.
Reload software.
6503
No RAM code found in machine. A.O1.OO
software defect.
1.
2.
or
3.
6504
RAM cyclic redundancy check (CRC) failedRAM code corrupt after loading code.
Reload software.
6505, 6506
Insufficient memory. M 1700A software loaded
into an M1701A.
1. Load proper software.
2. Replace CPU assembly.
6600, 6601
Catastrophic
Reload software.
6602
Failures in power-on routine.
1. Cycle power.
2. Reload software.
3. Replace CPU assembly.
6605, 6609, 6610
Missing message table. Disk could be bad.
Reload software.
6606, 6607
Failures in power-on routine.
1. Cycle power.
2. Reload software.
3. Replace CPU assembly.
6612
Wrong message table version.
Reload software.
6613, 6614,
6615, 6616
Software failure.
Reload software.
6990, 6991
Software corrupt.
Reload software.
Note
,I
.
u
6-8
Troubleshooting
software failure.
Reload software.
Load software version A.O1.O1
later.
Replace CPU assembly.
To reload the software on the M1702A XLe, remove the battery,
reinstall the battery and reconfigure the unit.
then