Download Service Manual

Configuring the
Cardiograph to Print
EC& on the HP
LaserJet
After connecting the cables, you must configure the cardiograph for
printing on the HP LaserJet.
1. Press (Menu)until the following display appears:
Transmit Store
2. Press Config.
CheckDisk
Files
The main configuration menu will appear:
Configuration
ID
Transmit
hlobal
3. Press Transmit
the display.
Config
Files
Exit
and the Transmit Configuration menu appears in
Configuration
AutoDial
Receive
Transmit
Exit
4. Press Transmit to configure any of four transmission sites. The
Configure Site menu will appear:
1
2
Configure
3
Site
4
Exit
5. Select a site number and the following display appears.
Connection? None
Choose
Enter
2-6
Installation
and Configuration
Exit