Download Machete Boom Mower
Transcript
PUMP - PARTS LOCATION Item 31 32 33 34 35 36 37 38 38-1 39 39-1 40 40-1 41 41-1 42 43 44 46 47 48 48-1 49 50 51 52 53 57 58 59 60 61 62 63 Qty 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8 3 1 Description Drive Shaft O-Ring, .0625" Dia X 3.25" ID (1.59 mm Dia. X 82.55 mm ID) O-Ring, Molded Nut (Used 1997 & Down) Bolt, 3/8"-16 X 1" (25.4 mm Long) Lockwasher Washer Plug O-Ring, .087" Dia. X .644" ID (2.21 mm Dia. X 16.36 mm ID) Plug O-Ring, .087" Dia. X .644" ID (2.21 mm Dia. X 16.36 mm ID) Plug O-Ring, .116" Dia. X .924" ID (2.95 mm Dia. X 23.47 mm ID) Plug O-Ring, .116" Dia. X .924" ID (2.95 mm Dia. X 23.47 mm ID) Key Cover Plate Shaft Seal Charge Pump Adapter Asy. Control Arm (Used 1997 & Down) Manual Servo Control Asy.( used 1997 & down) Solenoid Servo Control Manifold Asy, (Used 1998 & Up) Not Shown Inner Ring Gerotor Outer Ring Gerotor Supply Orfice Control Valve Orfice Control Arm Orfice Dump Valve Actuator of Plug Retaining Ring Quad Ring .062" Dia. X .625" ID (1.59 mm Dia. X 15.9 mm ID) Washer Washer Washer Adapter Wire Harness, 3 wire to 2 wire (P/N 02970201) used only when converting pre-1997 units to later Pumps. See Insert Sheet # 02970224 for instructions. Machete (Service Manual) 04/04 © 2004 Alamo Group Inc. 71