Download AIR-CONDITIONER
Transcript
FILE NO. SVM-06021 10-3 Outdoor Unit (RAS-18GAH-ES2, RAS-18GA-ES2) No. 1 Part name Common procedure Procedures Remarks 2 screws ∅ 4 x 10L 1) Stop the operation of the air conditioner and turn off its main power supply or remove the power supply cord. 2) Remove the packed valved cover and the electrical Parts cover (2 screws ∅ 4 x 10L) 3) Remove 2 cord clamps (4 screws ∅ 4 x 16L) and disconnect the power supply cord and connecting cable after removing 6 screws on the terminal block and 1 ground screw on the electrical parts base. 4) Remove the upper cabinet. (4 scerws ∅ 4 x 10L) (Pulling out upward) 5) Remove the front cabinet. (3 screws ∅ 4 x 10L) (Pull the front right protion toward you, and remove it pulling out upward.) 2 Cord clamps 4 screws ∅4 x 16L Packed valve cover Upper cabinet Front cabinet 2 Running capacitor for compressor 1) Perform the common procedure 1 2) Remove the capacitor band. (1 screw ∅4 x 10L) 3) Disconnect the lead wires from the capacitor terminal. 3 Running capacitor for fan motor 1) Perform the common procedure 1 2) Remove the fixing screw. (1 screw ∅4 x 10L) 3) Disconnect the lead wires from the capacitor terminal. Magnetic contactor 1) Perform the common procedure 1 2) Remove the fixing screw. (2 screws ∅ 4 x 10L) 3) Disconnect the lead wires from the terminal. 4 5 Transformer (Heat pump model) 1) Perform the common procedure 1 2) Remove the fixing screw. (2 screws ∅ 4 x 10L) 3) Disconnect the housing from the P.C. Board. Running capacitor for fan motor P.C. Board Running capacitor for compressor Transformer Heat pump model Magnetic contactor Running capacitor for fan motor Spark killer 1) Perform the common procedure 1 2) Disconnect the lead wires from the P.C. Board. 3) Remove P.C.Board after unhooking 4 clams. 6 P.C. Board (Heat pump model) 7 1) Perform the common procedure 1 Spark killer (Cooling only model) 2) Remove the fixing screw. (1 screw ∅ 4 x 10L) 3) Disconnect the lead wires from the terminal. Running capacitor for compressor Magnetic contactor Cooling only model - 75 -