Download Model WT-5300

Disassembly Guide
Figure 76: Filter Removal
7. Remove the three warming unit mounting clamps from the rear cover
assembly. See Figure 77.
Figure 77: Warming Unit Mounting Clamps
Caution: Separate the front and rear covers very carefully. The wires connected
between the covers are short and may be damaged if too much pressure is applied
to them.
8. Separate the front and rear cover assemblies. See Separating the Warming
Unit Front and Rear Covers on page 25.
9. Cut the two cable ties. See Figure 78, items 1 and 2.
66