Download FI127 Indicator

Using the Service Menu
Be sure to key in the password '127'
before pressing and holding the
ESCAPE key if you want to
change items in the service menu,
otherwise you will only be able to
view them.
You use the service menu to see information about your indicator, to test its
various functions and to configure how you want the system to work. Figures 4
through 19 show the service menu structure in the FI-127. Following each figure
are explanations for each of the service menu items. Use the same methods to get
around in the menu structure as you used in Using The User Menu section of this
manual. To edit items in this menu you must key in '127' before pressing
and holding the ESCAPE key.
Figure 4
Top level of the Service menu
About Menu
Information about the software
Audit Menu
Audit counters for calibration and configuration
Abuse Menu
Loadcell overload counters
Zero Menu
Zero balance information and reset
Test Menu
For testing the hardware of the indicator
Setup Menu
For configuration of the indicator
About Menu
Figure 5
About menu
14