Download Window Air Conditioner SVC MANUAL(Exploded

3.2.3 UNIT INSTALLATION
1. Remove the shipping screw from the ventilation door.
(See Figure 17)
Figure 17
2. Remove the front gille by pulling it out at the bottom to
release it, then lift it up along the unit top front.
(See Figure 18)
Figure 18
3. Slide the unit into the wall sleeve and secure with 6 screws
through the unit flange holes. (See Figure 19)
Figure 19
4. Reinstall the front grille by hooking the top over the unit top,
then pushing it in at the bottom. (See Figure 20)
Figure 20
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 25 -
LGE Internal Use Only