Download manual

Transcript
Section 8
Electrical
TABLE 8-1. Telltales Position and Color
Position
Standard Function
1
PTO
2
Check Transmission
3
Left Turn Arrow
4
Wait To Start
5
Brake Fail
6
High Beam
7
Malfunction Indicator
Lamp (MIL)
8
Fasten Seat Belt
9
Park Brake
10
Engine Brake
11
Hest
12
Right Turn Arrow
Note:
Use
Light Color
Editable or Fixed?
Illuminates to Indicate PTO is Engaged
Green
Editable
Illuminates During Transmission Fault
Yellow
Editable
Illuminates to Indicate Left Trun Signal is
Applied
Green
Fixed
Illuminates when Driver needs to Wait Before
Starting Engine
Yellow
Fixed
Illuminates When the Hydraulic Brake ECU
Determines Fault
Red
Editable
Illuminates to Indicate High Beam Lights are
Applied
Blue
Fixed
Yellow
Fixed
Used with Seatbelt Warning Option
Red
Fixed
Illuminates to Indicate the Park Brake is
Applied
Red
Fixed
Illuminates to Indicate Engine Brake Active
Green
Fixed
Indicates Exhuast After Treatment Filter
Regeneration
Yellow
Fixed
Illuminates to Indicate Right Turn Signal is
Applied
Green
Fixed
Illuminates to Indicate a Malfunction in
Emissions System (After 2013)
Only the positions labeled as “editable” in the chart above can be changed. You must apply the
standard icons on the editable card on all the positions that read “fixed”.
The wait to start and malfunction indicator lamp are part of the emission control system. They
must not be removed or altered.
If a connector is already connected to the editable Position in the IP harness, that Position cannot
be used for another function.
In order to activate the editable lights (either on the standard card or the editable card) locate the wiring connections on
pigtail connectors behind the right hand side gauge panel. The wires will be labeled and tagged with position numbers. For
example for position 1 the breakout label will be green and have the following text: “TELLTALE POS 1”. The color of the tag
corresponds to the color of the light. When these circuits are either grounded or powered the light in the dash will turn on.
All cards come with standard editable telltale lights, even if the chassis you have was not ordered with related components.
8-15
12/11