Download PDF Manual

I-2
THE INSTALLATION
DRIVE BELT SWITCHES TO MICROCUT MOTOR
**** ON SOME PAPER CUTTERS IT IS NOT ALWAYS POSSIBLE TO FIND SPACE TO
MOUNT A SECOND MOTOR. IT MAY BE NECESSARY TO REMOVE THE ORIGINAL
MOTOR AND INSTALL THE MICROCUT MOTOR IN THE OE SPACE.
NOTE: Position of the parts is for visualization only. Every installation will be unique. Mount
components for function and form--not necessarily to mimic this diagram.
DO NOT USE GREASE ON THE LEADSCREW MECHANISM. GREASE ATTRACTS
ABRASIVE DIRT AND ACTS AS AN INCONSISTENT CUSHION AGAINST THE
BACKGAUGE PREVENTING PROPER CUTTING PRECISION. USE A LIGHT
MACHINE OIL ONLY ON THE LEADSCREW. OIL THE LEADSCREW DAILY.