Download PI FLOWSIC 600 d_2

Commissioning
FLOWSIC600
Operating Instructions
Ultrasonic Gas Flow Meter
Fig. 4.2: MEPAFLOW600 “Connect to” menu
Note
If you cannot get connected with the FLOWSIC600, refer to the software manual for details
on troubleshooting.
If you are connected successfully, the current measured values, counter readings and
system status information will be displayed as shown in Fig. 4.3.
Fig. 4.3: “Measured values” tab
The values for validation rate (“% invalide measurements”), velocities of sound and more
are be displayed in the “Monitors” menu (see Fig. 4.4 to Fig. 4.7).
Note
68
The validation rate is the ratio of rejected measurements and total measurements. It is an
indicator for the quality of the measurement in the ultrasonic measurement path.
© SICK MAIHAK GmbH · Germany · All rights reserved
8 010 458 / 04-2007