Download ITI TX2512 flatbed UV printer evaluation - Large-format
Transcript
TX2512 Dedicated UV-Cured Flatbed Printer 5 13. Do you need an uninterruptible power supply (UPS)? We at FLAAR use UPS systems for all desktop computers, but a printer would need an industrial strength UPS or power line conditioner. Actually, even 90% of the UPS units sold on the Internet today are not adequate to protect hard drives and computers from being fried by an electrical surge (unless you have an industrial strength UPS model). 14. Do you need to provide air pressure for negative pressure for ink in printheads? No 15. Is an air suction system needed to be installed as a separate item, or is all the vacuum table or other vacuum requirements already included in the printer itself? A suction system is built in. The User’s Manual mentions which aspect of the printer does need air pressure supplied by the print shop. Shop air is only needed to operate the alignment pins on the table and for the roll to roll option. Iti printer Base price, chassis and print engine RIP Software, lite RIP, full version transportation installation training ink warranty spare parts kit computer Total cost Other brand you are considering Other brand you are considering Other brand you are considering $59,995.00 Included Distance dependent from San Francisco Included Included First Set Included 12 months Available User Supplied $59,995.00 +computer 16. How does the total cost compare with other UV printers? Printers manufactured in Japan and Canada are more expensive. Printers which are cheaper lack sophistication. Not many other factories in China have the experience as does the factory which makes the iti printer. iti CET (Handtop) Oce Arizona JETRIX HP Scitex FB550 Note: this is not a dedicated flatbed, but a combo belt system) Base price $59,995.00 More printheads $64,495.00 Most printheads $77,995.00