1
Download 6 - Body - Ken Gilbert
Transcript
SECURITY SYSTEM SECURITY AND LOCKS 4. Security System A: SCHEMATIC <Ref. to WI-121, SCHEMATIC, Security System.> B: ELECTRICAL SPECIFICATION U 06M0972 Content Empty Ignition switch (ON) Passive arm Trunk room light switch (Sedan), rear gate latch switch (Wagon) Door switch Empty Keyless entry control module Keyless entry control module Securitv indicator liaht Kevless entry control module Power supply for clearance light (Back-uo\ r, Clearance light Power SUDDIV (Back-ud Ground-Interrupt relay Security horn relay Security horn Securitv horn relav I Terminal No. 1 2 (INPUT) I Measuring condition Battery voltage is present when ignition switch is turned ON. - 3 0 V is present when trunk room light switch or rear gate latch switch is turned ON. 0 V is present when any door is open. (INPUT) 5 (INPUT) 6 7 8 9 (OUTPUT) I 10 0 V is Dresent when activating the alarm operation. - I I Battery voltage is constantly present. I - - 12 (OUTPUT) 13 114 15 (OUTPUT) 16 (INPUT) 17 (OUTPUT) 18 (INPUT) Battery voltage is present when activating the alarm operation. Batterv voltaae is constantlv Dresent. I o v is constantly present. Battery voltage is present when activating the alarm operation. Battery voltage is present when activating the alarm operation. Battery voltage is present when activating the alarm operation. Batterv voltaae is Dresent when activatina the alarm operation. SL-21
