1
Download Model 2000 Service Manual
Transcript
CHAPTER 4 4.1 4.2 MAINTENANCE Recommended Maintenance Schedule Procedure Interval Clean External Surfaces As required Adjust Remote Display Clamp As required Inspect connectors and cables 3 months Clean the Condenser 3 months Replace Fluid 3 months Calibration and Operational Check Every 2000 hours or 250 uses, which ever is less, as indicated by system display Clean External Surfaces Cleaning should include the exterior of the Control Module and the power cord. Use a soft cloth and mild detergent or disinfectant according to hospital protocol. The display screen can be wiped with a clean, lint-free, moist cloth. Fluid Delivery Lines and Temperature Cables should be cleansed with a hospital approved disinfectant. 17
