Download 1050/1055
Transcript
Removal and Installation Top Cover Refer to Figure 27. Removal WARNING Switch off the printer and remove the power cord. 1. Remove one T-15 screw Item 1) from the front of the top cover (item 2). 2. Remove five T-15 screws (item 3) from the rear of the top cover. 3. The top cover (Item 2) can now be released from retaining clips and then removed. 1 3 2 C607405 Figure 27: Top Cover HP DesignJets 1050C and 1055CM Printers Service Manual 8-31
Related documents
I. INSTALLATION II. REFILLING User Manual for
HP 1055CM User's Manual
HP Designjet 5000 series Service manual
HP DESIGNJET 5000 User's Manual
PC Concepts 500PS User's Manual
Removal and Installation
Introduction
HP No.80 Ink Supplies Troubleshooting
StecaGrid 20 000 StecaGrid 23 000
HP 1000 Series User's Manual
HP DesignJet 650c/ps User's Manual
HP Printer 800 User's Manual