Download maintenance work on chassis and engine

MAINTENANCE WORK ON CHASSIS AND ENGINE
58
–
Lay the motorcycle on its side.
–
Remove screws .
–
Take off the clutch cover.
–
Hold the clutch drum using the special tool .
300655-10
Holding spanner (54629012100)
–
Remove screw .
–
Remove the clutch drum.
–
Take off the centrifugal clutch .
–
Position the centrifugal clutch .
–
Position the clutch drum.
–
Hold the clutch drum using the special tool .
–
Mount and tighten screw .
300656-10
300657-10
Fitting centrifugal clutch
9.91
x
300657-11
Requirement
Screw, clutch drum
M8
30 Nm
(22.1 lbf ft)
Loctite® 243™
300656-11
–
Position the clutch cover with the seal.
–
Mount and tighten screws .
Requirement
Screw, clutch cover
300655-11
M6
10 Nm (7.4 lbf ft)