Download - Aplisens SA

Transcript
A
37
IO – APIS(ENG)
11.2.3.16. CLAMP H – sealing of valve-seat ( door ) in maximumextreme position of actuator’s piston rod.
i
- Function is not available for APIS-1XX-….executions
There is the following text on display:
26º
CLAMP L
Press once button ∇; then the current ambient temperature of the positioner will appear on the display e.g.:
26º
- and symbol of function enabling sealing of valve-seat ( door )
in maximum-extreme position of the actuator piston rod
CLAMP H
o
Press button
CLA H
OFF
; the following text will appear on display:
- indicating currently realized function and e.g.:
- indicating turned off sealing of the valve-seat ( door )
in maximum-extreme position of the actuator’s piston rod
If the user is not going to turn on valve-seat sealing function ( door ) in maximum-extreme position of the
actuator piston rod you should press
button.
If the user is not going to turn on valve-seat sealing function ( door ) in maximum-extreme position of the
actuator piston rod you should press once ∇ or ∆ button; then the following text will appear on the display:
CLA H
n
o
- indicating currently realized function and
- indicating turned on sealing of the valve-seat ( door ) in maximum-extreme
position of the actuator’s piston rod.
Accept turning on of valve-seat sealing ( door ) in maximum-extreme position of the actuator piston
rod by pressing
button; the current value of ambient temperature of the positioner will appear
on the display e.g.:
26º
- and symbol of function enabling change of control pressure in chamber A of
the actuator ( chamber connected with connector “2” of the positioner )
PRESS A
i
Sealing function of the valve-seat ( door ) in maximum-extreme position of the actuator piston rod is
factory turned off ( OFF ) .