Download - Aplisens SA

Markings used
Symbol
i
Description
Warning regarding necessity of exact use of information contained in the documentation to
ensure safety and full device functionality.
Information especially useful for assembly and operation of the device.
Information especially useful for assembly and operation of the device in Ex execution.
Information about procedure for worn-out equipment.
BASIC REQUIREMENTS AND SAFETY OF OPERATION
- The manufacturer is not liable for damages resulted from improper assembly, not
maintaining in a proper technical condition as well as operation of the positioner
inconsistent with its intended use.
- The assembly and starting works should be executed only by the qualified automatics assemblers
or by trained personnel under their supervision, according to the obligatory regulations and
recommendations from the field of automatics and electrotechnics.
- Improper assembly and configuration can result in incorrect operation, leading to the device’s
damage or accident.
- During assembly, operation, inspections all safety and protection requirements should be taken
into account.
- In case of inefficiency, the device should be disconnected and given back to the manufacturer or
authorized branch for repair.
Installation for intrinsically safe executions should be performed especially carefully with
observation of the standards and regulations suitable for these types of installations.
The manufacturer reserves the right to introduce changes (not resulting in deterioration of operation and
metrological parameters of the product) without updating of the service manual’s content.
The current version of the service manual and certificate of conformity is available on the website
www.aplisens.pl