Download - Aplisens SA
Transcript
A 37 IO – APIS(ENG) 11.2.3.16. CLAMP H – sealing of valve-seat ( door ) in maximumextreme position of actuator’s piston rod. i - Function is not available for APIS-1XX-….executions There is the following text on display: 26º CLAMP L Press once button ∇; then the current ambient temperature of the positioner will appear on the display e.g.: 26º - and symbol of function enabling sealing of valve-seat ( door ) in maximum-extreme position of the actuator piston rod CLAMP H o Press button CLA H OFF ; the following text will appear on display: - indicating currently realized function and e.g.: - indicating turned off sealing of the valve-seat ( door ) in maximum-extreme position of the actuator’s piston rod If the user is not going to turn on valve-seat sealing function ( door ) in maximum-extreme position of the actuator piston rod you should press button. If the user is not going to turn on valve-seat sealing function ( door ) in maximum-extreme position of the actuator piston rod you should press once ∇ or ∆ button; then the following text will appear on the display: CLA H n o - indicating currently realized function and - indicating turned on sealing of the valve-seat ( door ) in maximum-extreme position of the actuator’s piston rod. Accept turning on of valve-seat sealing ( door ) in maximum-extreme position of the actuator piston rod by pressing button; the current value of ambient temperature of the positioner will appear on the display e.g.: 26º - and symbol of function enabling change of control pressure in chamber A of the actuator ( chamber connected with connector “2” of the positioner ) PRESS A i Sealing function of the valve-seat ( door ) in maximum-extreme position of the actuator piston rod is factory turned off ( OFF ) .