Download WEG CFW100 Variable Frequency Drives User`s
Transcript
Summary of Revisions The information below describes the revisions made to this manual. English Revision Description Chapter 00 First edition. - 01 Modification in Table B1 on page 121 and addition of installation recommendations. - ATTENTION! Check the frequency of the power supply. In case the power supply frequency is different from the factory setting (check P403), it is necessary to set: P204 = 5 for 60 Hz. P204 = 6 for 50 Hz. It is only necessary to set these parameters once. Refer to the programming manual of the CFW100 for further details about the programming of parameter P204. Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]