Download WEG CFW100 Variable Frequency Drives User`s

Transcript
Summary of Revisions
The information below describes the revisions made to this manual.
English
Revision
Description
Chapter
00
First edition.
-
01
Modification in Table B1 on page 121 and addition of installation
recommendations.
-
ATTENTION!
Check the frequency of the power supply.
In case the power supply frequency is different from the factory setting (check
P403), it is necessary to set:
„„ P204 = 5 for 60 Hz.
„„ P204 = 6 for 50 Hz.
It is only necessary to set these parameters once.
Refer to the programming manual of the CFW100 for further details about the
programming of parameter P204.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]