Download Catalogo generale

Transcript
SPARE PARTS FOR FACE DRIVER Ø 45/150 - RICAMBI PER TRASCINATORE Ø 45/150
Driving pins and center point face plate for face
driver ø 45/150
Code - Codice
072921205
Fixed center point for centers from ø 3 to ø 18
Code - Codice
072920104
Punta fissa centrale per centri da ø 3 a ø 18
Testina porta artigli e punta centrale per
trascinatore ø 45/150
Driving pins with added hard metal for
driving shafts from ø 45 to ø 150
®
Code - Codice
080920005
Artigli in md riportato per trainare alberi da
ø 45 a ø 150
Reduced edge driving pins
with added hard metal for
driving shafts from ø 45 to
ø 150 lowered to permit the
wheel to get out on face
driver side
Code - Codice
091920344
091920350
091920355
091920360
091920365
Ø A
44(1.732)
50(1.969)
55 (2.165)
60 (2.362)
65 (2.559)
B
4.8(0.189)
7.8(0.307)
10.3(0.406)
12.8(0.504)
15.3(0.602)
Artiglio in md riportato per trainare alberi da ø 45 a ø 150 ribassato
per permettere l’ uscita mola da lato trascinatore
Fixed center point with slots for centers or holes from ø 18 to ø 71
Punta fissa centrale a capruggine per fori o centri da ø 18 a ø 71
Code
Codice
171713031
171713032
171713033
171713034
171713035
Dimensions
Dimensioni
Ø A
15 (0.591)
25 (0.984)
35 (1.378)
45 (1.772)
55 (2.165)
For centers or holes
Per centri o fori
Ø B
32 (1.260)
42 (1.654)
52 (2.047)
62 (2.441)
72 (2.835)
from / dal Ø
18 (0.709)
28 (1.102)
38 (1.496)
48 (1.890)
58 (2.283)
to / al Ø
31 (1.220)
41 (1.614)
51 (2.008)
61 (2.402)
71 (2.795)
91