Download Catalogo generale
Transcript
face driver 15/55 with flange ATTACHMENT AND SELF ADJUSTABLE INTERCHANGEABLE DRIVING PINS Trascinatore frontale 15/55 con attacco a flangia E DENTI BASCULANTI TECHNICAL FEATURES: This face driver is suitable for machining parts from Ø15 (inch. 0.591) to Ø70 mm (inch. 2.756). For parts from Ø15 (inch. 0.591) to Ø31 (inch. 1.220) mm gear cutting is possible on live center side only; for parts from Ø31 (inch. 1.220) to Ø70 (inch. 2.756) mm gear cutting is possible also on face driver side. ® CARATTERISTICHE TECNICHE: Questo trascinatore ha un campo di lavoro da Ø15 a Ø70 mm. Per particolari da Ø15 a Ø31 mm la dentatura è possibile solo dal lato contropunta (ingombro artigli Ø31), mentre per particolari da Ø31 a Ø70 mm è possibile eseguire la dentatura anche dal lato trascinatore. Code Codice 070752406A SPARE PARTS Driving pins with double blades for 15/55 RICAMBI Artigli di trascinamento bitaglienti per 15/55 Code Codice 080809006 Center point for 15/55 Punta centrale per 15/55 Code Codice 072102766 Center points with slots for 15/55 Punte centrali a capruggine per 15/55 (for large centers or holes) (per centri grandi o fori) Code center points with slots Codice punte a capruggine 171711015 171711016 171711017 171711019 171711020 171711022 For operating instructions, see page. 41 76 Dimensions points with slots Dimensioni punte a capruggine Ø A Ø B 5 (0.197) 12 (0.472) 8 (0.315) 15 (0.591) 11 (0.433) 18 (0.709) 14 (0.551) 21 (0.827) 17 (0.669) 24 (0.945) 20 (0.787) 27 (1.063) For centers or “F” holes Per centri o fori “F” from / dal Ø 7.5 (0.295) 10.5(0.413) 13.5(0.531) 16.5(0.650) 19.5(0.768) 22.5(0.886) to / al Ø 10.5(0.413) 13.5(0.531) 16.5(0.650) 19.5(0.768) 22.5(0.886) 25.5(1.004) Per le modalità d’impiego dei trascinatori con punta a capruggine vedere pag. 41