Download Catalogo generale

Transcript
face driver 15/55 with flange ATTACHMENT
AND SELF ADJUSTABLE INTERCHANGEABLE DRIVING PINS
Trascinatore frontale 15/55 con attacco a flangia E DENTI BASCULANTI
TECHNICAL FEATURES:
This face driver is suitable for machining parts from Ø15 (inch. 0.591)
to Ø70 mm (inch. 2.756). For parts from Ø15 (inch. 0.591) to Ø31
(inch. 1.220) mm gear cutting is possible on live center side only; for
parts from Ø31 (inch. 1.220) to Ø70 (inch. 2.756) mm gear cutting is
possible also on face driver side.
®
CARATTERISTICHE TECNICHE:
Questo trascinatore ha un campo di lavoro da Ø15 a Ø70 mm.
Per particolari da Ø15 a Ø31 mm la dentatura è possibile solo dal lato
contropunta (ingombro artigli Ø31), mentre per particolari da Ø31 a
Ø70 mm è possibile eseguire la dentatura anche dal lato trascinatore.
Code
Codice
070752406A
SPARE PARTS
Driving pins with double blades for 15/55
RICAMBI
Artigli di trascinamento bitaglienti per 15/55
Code
Codice
080809006
Center point for 15/55
Punta centrale per 15/55
Code
Codice
072102766
Center points with slots for 15/55
Punte centrali a capruggine per 15/55
(for large centers or holes)
(per centri grandi o fori)
Code center points
with slots
Codice punte
a capruggine
171711015
171711016
171711017
171711019
171711020
171711022
For operating instructions, see page. 41
76
Dimensions points
with slots
Dimensioni punte
a capruggine
Ø A
Ø B
5 (0.197) 12 (0.472)
8 (0.315) 15 (0.591)
11 (0.433) 18 (0.709)
14 (0.551) 21 (0.827)
17 (0.669) 24 (0.945)
20 (0.787) 27 (1.063)
For centers or “F” holes
Per centri o fori “F”
from / dal Ø
7.5 (0.295)
10.5(0.413)
13.5(0.531)
16.5(0.650)
19.5(0.768)
22.5(0.886)
to / al Ø
10.5(0.413)
13.5(0.531)
16.5(0.650)
19.5(0.768)
22.5(0.886)
25.5(1.004)
Per le modalità d’impiego dei trascinatori con punta a capruggine vedere pag. 41