Download Catalogo generale
Transcript
SPARE PARTS FOR FACE DRIVER Ø 45/150 - RICAMBI PER TRASCINATORE Ø 45/150 Driving pins and center point face plate for face driver ø 45/150 Code - Codice 072921205 Fixed center point for centers from ø 3 to ø 18 Code - Codice 072920104 Punta fissa centrale per centri da ø 3 a ø 18 Testina porta artigli e punta centrale per trascinatore ø 45/150 Driving pins with added hard metal for driving shafts from ø 45 to ø 150 ® Code - Codice 080920005 Artigli in md riportato per trainare alberi da ø 45 a ø 150 Reduced edge driving pins with added hard metal for driving shafts from ø 45 to ø 150 lowered to permit the wheel to get out on face driver side Code - Codice 091920344 091920350 091920355 091920360 091920365 Ø A 44(1.732) 50(1.969) 55 (2.165) 60 (2.362) 65 (2.559) B 4.8(0.189) 7.8(0.307) 10.3(0.406) 12.8(0.504) 15.3(0.602) Artiglio in md riportato per trainare alberi da ø 45 a ø 150 ribassato per permettere l’ uscita mola da lato trascinatore Fixed center point with slots for centers or holes from ø 18 to ø 71 Punta fissa centrale a capruggine per fori o centri da ø 18 a ø 71 Code Codice 171713031 171713032 171713033 171713034 171713035 Dimensions Dimensioni Ø A 15 (0.591) 25 (0.984) 35 (1.378) 45 (1.772) 55 (2.165) For centers or holes Per centri o fori Ø B 32 (1.260) 42 (1.654) 52 (2.047) 62 (2.441) 72 (2.835) from / dal Ø 18 (0.709) 28 (1.102) 38 (1.496) 48 (1.890) 58 (2.283) to / al Ø 31 (1.220) 41 (1.614) 51 (2.008) 61 (2.402) 71 (2.795) 91