Download Installazione

71
3 INSTALLATION
3.3
Tamper device
The Control unit should be protected against attempts at tampering by installing device
item L4630 on the back.
To mount the tamper device remove the protection plug from the Control unit turning it
by 90°.
If the flush-mounted box is flush fitted in the wall, before inserting the rod in the housing,
cut it at the first notch as shown in the figure.
Insert the rod, lock it by turning it by 90° and extract it completely.
End the installation as indicated on the next page.
52mm
52mm
< 60mm
< 60mm