Download IRIS BLUE - Santerno

BASIC
USER MANUAL
IRIS BLUE
3. USING THE DISPLAY/KEYPAD
3.1. Overview
This section covers navigation in the display/keypad.
For details about particular settings of the keypad (contrast, backlight, etc.), please refer to the section concerning the
display/keypad in the IRIS BLUE’s Installation Guide, whilst for details regarding custom navigation for the root page,
the measures in the Keypad page and the Root page and the PID custom unit of measure, please refer to the
DISPLAY/KEYPAD MENU in the IRIS BLUE’s Programming Guide.
3.2. Menu Tree
MEASURES
PARAMETERS
CONFIGURATION
PRODUCT
IDENTIFICATION
INVERTER OK
M00=+0.00rpm
M02=+ 0.00 rpm
[MEA] PAR CF IDP
INVERTER OK
M00=+0.00rpm
M02=+ 0.00 rpm
MEA [PAR] CF IDP
INVERTER OK
M00=+0.00rpm
M02=+ 0.00 rpm
MEA PAR [CF] IDP
INVERTER OK
M00=+0.00rpm
M02=+ 0.00 rpm
MEA PAR CF [IDP]
MEASURES MENU
M Parameters
Cannot be altered
PARAMETERS MENU
P Par. that can
be altered when the
motor is running
CONFIGURATION MENU
C-I-R Parameters
Can be altered
when motor OFF
PRODUCT MENU
Language
Selection and
Inverter Data
[MEA]
MOTOR MEASURES
[PAR]
PASSWORD AND USER
LEVEL
[CFG]
[MEA]
PID REGULATOR
[PAR]
[CFG]
[MEA]
DIGITAL INPUTS
[PAR]
[MEA]
REFERENCES
[PAR]
SPEED LOOP AND
CURRENT BALANCING
(*)
RAMPS
MULTISPEED
[IDP]
AUTOTUNE
PRODUCT
MOTOR
CONFIGURATION
[CFG]
MOTOR LIMITS
[CFG]
THERMAL PROTECTION
[CFG]
[MEA]
OUTPUTS
PID
CONFIGURATION
[MEA]
AUTODIAGNOSTICS
[CFG]
[MEA]
DIGITAL INPUT
SETTINGS
[CFG]
MOTORS POWER
EEPROM
[MEA]
FAULT LIST
[MEA]
POWER OFF LIST
Figure 3: Menu Tree
(*) Available for VTC control only.
21/69