Download Safety Rules - Ppe- pressure - washer

Section 3: Assembly
Install
Oil
Dipstick
on Pump
Engine
Oil and Fuel
• Place pressure washer on a level surface.
To install the oil dipstick:
I. Make sure unit is on a level surface.
• Refer to engine owner's manual and follow oil and fuel
recommendations and instructions.
CAUTION
• Failure to do so will void the warranty
Add
CAUTION
and damage the
pump.
• Refer to engine manualfor oil andfuel fill information.
2.
Remove and discard shipping cap located on pump
(Figure 3).
Remove shipping cap and
instaltoil dipstick here.
(
Pump Oit
Dipstick
3.
Install oil dipstick.
Shipping Cap
• Damage to equipment resulting from failure to follow this
instructionwill void warranty.
NOTE: Check oil often during engine break-in. Refer to
engine owner's manual for recommendations.