Download GB - 23

CUSTOMIZING THE DVD FUNCTION SETTINGS
Tv Display
Pan Scan
• When wide-screen video is played, this mode clips the right and
left sides of the image so that it can be viewed on a conventional
screen.
• Some wide-screen DVDs that do not permit Pan Scan mode
playback are automatically played in letterbox mode (black
bands that appear at the top and bottom of the screen).
Letter Box
• When wide-screen video is played in this mode on a
conventional screen, black bands appear at the top and bottom
of the screen.
Wide screen
• This is the correct mode for playing wide-screen videos on the
unit or other external wide-screens.
Note:
• The displayable picture size is preset on the DVD. Therefore the
playback picture of some DVDs may not conform to the picture
size you select.
• When you play DVDs recorded in the 4:3 aspect ratio, the
playback picture will always appears in the 4:3 aspect ratio
regardless of the TV TYPE setting.
Cut off when a widescreen video image is
played.
PAN SCAN
LETTER BOX
WIDE SCREEN
Parental
DVD discs equipped with a password function and are rated according to their content.
The contents allowed by parental lock level and the way a DVD disc is controlled may
vary from disc to disc. For example, if the disc allows, you could lock-out violent scenes
unsuitable for children or you could lock out playback of the disc altogether.
You cannot play DVD discs rated higher than the level you selected unless you
cancel the parental lock function.
The parental lock levels are equivalent to the following ratings.
Level 1 : Kid Safe Level 2 : G Level 3 : PG Level 4 : PG-13
Level 5 : PG-R
Level 6 : R
Level 7 : NC-17 Level 8 : Adult
Password
Use or button to shift and select PASSWORD, use button to “Change”, then press
the ENTER button. Enter your 4-digit security code until the cursor to OK. Press the
ENTER button.
If you forget the password, you can erase your current password by pressing
number button 8 on the remote four times, then press the ENTER button to confirm
the setting
(PASSWORD : 8 8 8 8).
Default
It takes 3-5 seconds to reset the unit to the factory default.
GB - 20